Content |
Powerful monitor-speaker - Active speaker-system for direct connection with the signal source
- 2-way speaker-system
- Clear and powerful sound
- 2-band EQ master-signal and master-signal
- Wide range of uses in spite of minimum size
- Ideal for decentral sound-surroundings, e.g. in bistros, restaurants, bars or studio
- Delivery includes mounting bracket for ceiling or wall installation
Technical Information:
Power supply: | 230 V AC, 50 Hz ~ | Power consumption: | 125 W | Amplifier power: | 80 W | Components: | 8" woofer, 1 tweeter | Inputs: | 1 Line In | XLR | Outputs: | 1 Line Out | XLR | Max. SPL: | 90 dB | Impedance: | 8 Ohms | Frequency-range: | 40 Hz - 20 kHz | Dimensions (H x W x D): | 360 x 270 x 240 mm | Weight: | 8 kg (piece) | |
- 37 Hz to 18 kHz frequency range
(-10 dB) - 150W pink noise, 300 watts continuous program power capacity
- 110 x 85 degree coverage with rotatable horn
- 115W, 55W, 28W at 70V/100V (plus 14W taps at 70V only)
- 8 Ohm Bypass
- Outdoor-rated screw down input terminal strip (with MTC-PC2 sealed entrance cover)
- Available in black or white (Control 29AV-WH)
- Dimensions (HxWxD): 518 mm x 305 mm x 280 mm (20.3 in x 12.0 in x 11.0 in)
- Net Weight: 12.2 kg (26.8 lb)
|
Ειδική έκδοση του AM 7200/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.
* CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.
* 2432H High-Frequency Compression Driver
* PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.
* Bi-Amp/Passive Switchable.
* Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).
Frequency Range (-10 dB) : 260 Hz – 20 kHz
Frequency Response (±3 dB) : 330 Hz – 18 kHz
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 11
Directivity Index (DI) : 10.5 dB
Crossover Modes : Bi-amp/Passive switchable
Crossover Frequency : 2.2 kHz
Transducer Power Rating (AES) : MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating (IEC) : MF/HF: 200 W (800 W peak), 100 hrs
Maximum SPL5 : Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) : Passive mode: 108 dB SPL
Nominal Impedance : 8 ohms
Midrange Driver : JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver
Sensitivity (1W @ 1m)
(Midrange) : 108 dB SPL
High Frequency Driver : JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
Sensitivity (1W @ 1m)
(High Frequency) : 113 dB SPL
Waveguide : PT-K95MH
Enclosure : Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment : 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish : Black DuraFlex™ finish.
White available upon request.
Grille : Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector : NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications : Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical cabinet orientation) : 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight : 27.2 kg (60 lb)
Optional Accessories : M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
|
The latest addition to TOA's acclaimed speaker line, the new F-2000 and F-1000 Series of compact,
high efficiency two-way speakers achieve higher performance levels for wide range frequency response and power handling.
Designed to be extremely versatile in order to meet different installation and application requirements, the new F-2000 and F-1000 Series are ideal solutions that solve increasing
needs for adaptable sound reinforcement.
• Finish in Black or White
• Weather proof version available (F-2000BTWP)
• Low impedance and 100V versions (F-2000BT)
• External rotary control for various impedance settings
• Multi position Bracket included
• Built in speaker protection
Various mounting brackets
enables a wide variety of installations, for example on walls, ceilings and speaker stands. Moreover, additional available brackets make even more demanding installations possible.
Specification | Model F-2000B | Enclosure Type | Bass-reflex type | Power Handling Capacity | 60W(continous pink noise)180W (continous program) | Impedance | 8Ohm | Sensitivity | 92dB (1w,1m) | Frequency Responce | 65-20,000Hz | Crossover Frequency | 2.5kHz | Directivity Angle | Horizontal 110°, vertical 100°, Horizontal 80°, vertical 80°(with horn adaptor) | Speaker Componenrs | Low frequency 20 cm cone type. High Frequency, 25mm dome tweeter | Input Terminals | Push-in terminal | Finish | HIPS, black | Dimensions | 224(W) × 373(H) × 235(D)mm | Weight | 6.5 kg (14.33 lb) (including the supplied brackets) | Accessories | Speaker bracket × 1, Joint bracket × 1, Wall bracket × 1, Bracket fixing screw × 1 set | Option | Board hanger bracket:HY-CM20B,Cluster braket:HY-CL20B,Speaker stand:ST-16A |
|
The C3108 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.
Its compact size makes it ideal for low visibility side wall mounting.
The high-frequency section is a constant directivity horn loaded to a 1” neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is an 8” woofer with a 2” voice coil.
Features |
---|
90°x 70° CMD (Constant Matching Design) constant directivity horn | Linear/HF boost switch | Rotatable Horn System for horizontal cabinet mounting applications | HF driver AMCDP (Active Mosfet Compression Driver Protection) | LICC (Low Impedance Compensated Crossover) network | 4 Suspension points (M10) | Omnimount™ 75 Plate fixing positions on rear of cabinet | 35 mm standard internal pole mount |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 60 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 100 Hz | ÷ 18 kHz | Max SPL @ 1m: | 120 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 70° | | Directivity index; Q: | 9.4 | | System Sensitivity: | 94 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 300 Watt | | Peak Power Handling: | 1200 Watt | | Recommended Amplifier: | 600 | | Protections: | Dynamic | | Crossover frequencies: | 2100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1" HFdriver, 1.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 25 Watt AES | | Sensitivity: | 109 dB | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 200 Watts AES | | Sensitivity: | 94 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | | Output connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 10 mm birch plywood construction | | Hardware: | 3 x M10, 4 X M5, 2 X M6 inserts | | Pole Mount/Cap: | Yes | | Grille: | Custom perforated steel grille | | Colour: | Black, white, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 427 / 16.81 mm/inch | | Width: | 242 / 9.52 mm/inch | | Depth: | 228 / 8.98 mm/inch | | Net Weight: | 10 / 22 Kg/Lbs |
|
50The AC18/26 is a compact, fullrange loudspeaker system designed to provide maximum bandwidth and SPL in a single system package and be visually unobtrusive. The enclosure design allows for installation very close to walls and ceilings, making it ideal for installation under balconies, columns, or for wall mounting. The high frequency device is a 1" exit compression driver integrated into a 120° x 60° rotatable PT™ (Progressive Transition) waveguide that provides even coverage throughout the intended listening area. The AC18/26 utilizes a 8" Symmetrical Field Geometry (SFG™) LF Transducer with a copper-clad aluminum edge wound 2.5" voice coil and a copper-capped pole piece that improves performance by reducing voice coil inductance and distortion.
The multi-ply hardwood enclosure is designed to work in the vertical plane as well as in the horizontal plane. Mounting points are provided for an optional U-bracket and for an OmniMount® type bracket. The AC18/26 is also equipped with attachment
points located on the bottom of the enclosure for a stand mount accessory. The plywood enclosure features JBLʼs DuraFlex™ finish and comes with a powder coated steel, foam-backed grille.
Features:
1" Exit Compression Driver with 120° x 60° Coverage PT™waveguide.
8" (205 mm) LF transducer
Compact enclosure
500W Program Power
Dual Neutrik NL4 connectors plus screw terminal
Attachment points for optional U-bracket, third-party OmniMount® typebracket and stand mount accessory.
Specifications:
Frequency Range (-10 dB): 47 Hz -20 kHz
Frequency Response (±3 dB):
f10, 52 Hz - 20 kHz
f3, 63 Hz – 19 kHz
Power Rating:
250W Cont. Pink Noise
500W Program
1000W Peak
Impedance: 8 Ohms
Coverage Pattern: 120° x 60°
Dimensions: 18.5" H x 9.4" W x 10" D (469.9 x 237.5 x 254mm)
Weight: 28.2 lbs. (12.8 kg)
|
Reviews
There are no reviews yet.