Content | 7.2-Channel Network A/V Receiver
Future-ready home entertainment with THX® Certified Select™
A harmonious mix of tech and tradition, the TX-NR696 adapts to entertainment life and finds the emotion in every sound source, from 3D film-scores to vinyl records. Next-Generation Network Audio gathers Chromecast built-in*1, Works with Sonos, AirPlay 2, and DTS Play-Fi® with streaming services for smooth multi-room audio evolved by support for the new high-speed 802.11ac (2x2 MIMO) Wi-Fi® specification*2. Dolby Atmos® and DTS:X® pull audiences deep into movies and games, THX Certified Select assuring a cinema-reference experience. If a 5.2.2-ch setup isn’t possible, Dolby Atmos Height Virtualizer*3 and DTS Virtual:X™*3 can create a 3D sound-field from horizontal speaker layouts. Zone 2 outputs bring amped multi-source audio to two rooms, while a flexible new zone line-out/front L/R pre-out terminal lets you listen how you want, where you want. With revitalized DAA system, 4K/60p/HDR HDMI® terminals, and many extras, this product excels in every aspect.
PRODUCT HIGHLIGHTS
- 175 W/Ch THX® Certified Select™ DAA system
- Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn*3
- Supports 5.2.2-ch Dolby Atmos® and DTS:X® playback
- Dolby Atmos Height Virtualizer*4 and DTS Virtual:X™*4
- HDMI Sub/Zone 2 output shares media to a second display or projector
- Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi® specification*5
- Zone 2/Zone B line-out/Front L/R pre-out with DAC shares D/A audio (including HDMI/SPDIF*6) or connects power amp
- Zone 2 outputs distribute D/A audio sources (including HDMI/SPDIF*6)
- Stereo Assign Mode to switch Front playback to Height channels
- DSP-based Vocal Enhancer improves dialog audibility
- GUI with OSD via HDMI features media input/output data display function
- HDMI supports 4K/60p, 4K HDR, 4:4:4/24-bit, BT.2020, HDCP 2.2
- AccuEQ with subwoofer EQ and AccuReflex™
- One-touch volume memory-presets for A/V inputsputs
AMPLIFIER FEATURES
- 175 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven)
- THX Certified Select certified Dynamic Audio Amplification
- Custom High-Current Low-Noise Power Transformer
- Large custom-made audio power capacitors
- Non-phase-shift amp topology with discrete output stage
- New dual-transistor amp output stages (L/R/C) doubles instantaneous current output for stunning dynamics and bass impact
- Strengthened power-supply line for high-current dynamics
- Refined HDMI grounds, short signal paths reduce noise
- SoC board remote from audio paths to reduce noise
- High-current drive handles 4-ohm speaker loads
- High-grade AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion
- VLSC™ (Vector Linear Shaping Circuitry) filtering (Front L/R)
- PLL (Phase Locked Loop) anti-jitter technology for S/PDIF audio
- Tone controls (bass/treble) for front L/R channels
- Pure Audio Mode and Direct Mode for high-fidelity sound
VIDEO & AUDIO SUPPORT
- Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision, HDR10, HLG), BT.2020, 4:4:4 color-space, 3D Video, ARC (Audio Return Channel), DeepColor™, x.v.Color™, and LipSync via HDMI
- Dolby Atmos, DTS:X, Dolby® TrueHD, and DTS-HD Master Audio® decoding
- Dolby Atmos Height Virtualizer and DTS Virtual:X 3D processing
- Dolby Surround® and DTS® Neural:X upmixing technology
- THX listening modes for movies, music, and games
- Sound optimization for games (Rock, Sports, Action, and RPG)
- SACD (Super Audio CD) playback via HDMI (2.8 MHz 2-ch/multichannel)
- Theater-Dimensional virtual surround-sound function
NETWORK FEATURES
- Next-Generation Network Audio with multi-room audio, streaming service integration, and remote app control
- Works with Sonos certified for the Sonos Home Sound System*7
- Chromecast built-in and voice control with the Google Assistant*8
- AirPlay 2 multi-room audio and voice control with Siri*9
- DTS Play-Fi® multi-room audio via Onkyo Music Control App*10
- FlareConnect™ multi-zone audio with compatible components
- Quad-core SoC processing evolves network functions and supports high-speed 802.11ac (2x2 MIMO) Wi-Fi specification
- Supports Onkyo Controller remote and music streaming app*10
- Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/ 2.8 MHz*11; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit*12)
CONNECTION TERMINALS
- 7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)
- 2 digital audio inputs (optical and coaxial, assignable)
- 4 analog RCA inputs (assignable)
- 3.5 mm mini-stereo analog input (front)
- 1 phono input with built-in MM equalizer for turntable
- 3.5 mm setup mic input for AccuEQ (front)
- 6.35 mm headphone jack (front)
- 2 subwoofer pre-outs
- Zone 2/Zone B line-out/Front pre-out (analog RCA)
- 7 screw-type speaker posts
- Ethernet terminal for network connection and IP control
- USB input (5 V/1 A) for audio playback (rear)
- AC socket for detachable power cable
ADVANCED FEATURES
- AccuEQ Room Acoustic Calibration and AccuReflex
- DSP Vocal Enhancer boosts dialog audibility via remote keys or front panel
- Bluetooth® wireless technology and Wake on Play Standby with auto input selection supporting select smart speakers
- Advanced Music Optimizer™ improves compressed audio playback
- Zone 2 speaker outputs for powered simultaneous multi-source D/A audio distribution (including HDMI/SPDIF) with Zone 2 DAC; output via Zone 2 and Zone 2 line-out
- Front/Height/Surround Back switching (layout dependent) for ambient listening in Stereo Assign Mode
- Zone 2/Zone B line-out/Front L/R pre-out (analog RCA) with Zone 2 DAC connects compatible audio systems for synced/independent D/A playback (including HDMI/SPDIF) in Main and Zone 2; connects compatible transmitters for wireless headphones; connects power amp for Front L/R speakers
- One-touch volume memory-presets for A/V inputs via front panel
- 1080p to 4K upscaling and GUI with overlaid OSD via HDMI
- Crossover adjustment for each channel(40/50/60/70/80/90/100/120/150/180/200 Hz)
- A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz)
- Various standby modes and HDMI pass-through
- IP control for home automation systems via LAN
- 3-Mode display dimmer (Normal/Dim/Dimmer)
- 40 FM/AM random presets
- Redesigned simple remote control
|
Premium 9.2 channel AV Surround Receiver offering the most advanced 3D audio suite with Dolby Atmos, DTS:X and Auro-3D built-in, plus unparalleled music playback options, thanks to our HEOS technology. Coming soon - control with Alexa voice commands.
AMAZING 3D-SOUND.
Enjoy the most complete surround sound experience with latest audio formats Dolby Atmos, DTS:X and Auro-3D built-in. Most remarkably, the 9 channel amplification allows for setting up a 7.1.2 or 5.1.4 3D experience out of box. The AVR-X4400H even supports 7.1.4 speaker configuration by adding an external stereo amplifier thanks to its 11.2 channel processing capability.
SOUND IN THE RIGHT PLACE.
Feel every dimension in Dolby Atmos. Dolby Atmos transports you into the story with moving audio that flows all around you with breathtaking realism. Enjoy a 5.1 surround sound speaker system and 4 additional overhead speakers or 4 Dolby Atmos elevation speakers for the ultimate home theater experience - including Dolby Surround upmixer for legacy content.
FUTUREPROOF IN ANY WAY.
All eight HDMI inputs and three HDMI outputs feature HDCP 2.2 compatibility and the latest HDMI specifications, including 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, High Dynamic Range (HDR) and 21:9 video, 3D, and BT.2020 pass-through support. It is even ready for Enhanced Audio Return Channel (eARC) for 3D audio playback through TV apps. The feature will be enabled via a future firmware update.
MEASURE YOUR SOUND TO YOUR ROOM.
The AVR-X4400H features the most advanced Audyssey MultEQ XT32 room acoustic measurement system including Audyssey Dynamic Volume, Dynamic EQ, LFC and SubEQ HT. Through these technologies, and with the supplied microphone, it exactly analyzes each speaker's output to optimize the overall listening experience. With the additional Audyssey MultEQ Editor App (available for purchase), very advanced users can even go further "under the hood" if desired.
| Specs
Audio Specifications and Features |
Stereo Power |
75 W |
Input Sensitivity/Impedance |
27 |
Surround Processing Features |
Dolby Digital |
55 dB |
Dolby Pro Logic II with Movie, Music and Game Mode |
40 dB |
Video Features |
Television Format |
PAL |
Input Level/Impedance |
1 Vp-p/75 |
Video Frequency Response (Component Video) |
10 Hz – 8 MHz (–3 dB) |
HDMI Input / Output |
4K x 2K |
HDMI Version |
1.4 a with 3D support |
FM Tuner Features |
Frequency Range |
87.5 MHz – 108.0 MHz MHz |
Signal-to-Noise Ratio (Mono/Stereo) |
70 dB/68 dB |
Distortion (Mono/Stereo) |
0.2%/0.3% |
Stereo Separation @ 1kHz |
40 dB |
Selectivity ±400kHz |
70 dB |
Image Rejection |
80 |
IF Rejection |
80 |
AM Tuner Specifications |
Frequency Range kHz |
522 kHz – 1,620 kHz kHz |
Signal-to-Noise Ratio |
38 dB |
Usable Sensitivity (Loop) |
375 µV |
Distortion |
(1 kHz, 50% mod): 1.0% |
Selectivity |
(±10 kHz): 30 dB |
General Specifications |
Power Requirement |
220V - 240V AC, 50Hz/60Hz |
Power Consumption (full power/idle) |
0.5 W (standby); 410 W maximum |
Dimensions (H x W x D – Metric/English) |
121 mm x 440 mm x 300 mm |
Weight (Metric/English) |
4.6 kg (10 lb) |
|
Features
7.2-Channel AV Receiver Featuring Class D3 (Direct Energy HD) Amplifier, Ultra HD (4K/60p) Upscaling/Pass-through, DSD Playback via Network, Subwoofer EQ, Dual Subwoofer Preout, Built-in AVNavigator, and Insulated Dual Chassis
Main Features
- Direct Energy HD amplifier
- Output Power per Channel 200W
- Impedance at Output Level 4Ω
- Number of Channels 7
- 4Ω Speaker Support
- Signal / Noise Ratio 101 dB
- Input Connections Front:
• 1 x HDMI • 1 x USB 2.0 (iPod/iPhone Digital Audio, USB drive) • 1 x MCACC Setup MIC
Rear: • 6 x HDMI (1 for HDMI/MHL) • 1 x Ethernet • 2 x AV Composite • 1 x Audio (Assignable) • 2 x Digital Coaxial (Assignable) • 2 x Digital Optical (Assignable) • 2 x Component Video(Assignable) • 1 x IR • 1 x USB charge port for AS-WL300 Wireless Converter
- Output Connections Front:
• 1 x Phones out
Rear: • 2 x HDMI (selectable for MAIN ZONE/HDZONE) • 1 x AV Composite • 1 x Monitor Component • 1 x Monitor Composite • 1 x IR • 2 x Preout Subwoofer • 9 x Speaker out
- File Playback • AM/FM Tuner (63 presets)
• Internet Radio with vTuner • Spotify Ready • Apple AirPlay
Via LAN/USB: • MP3, WAV, AAC, WMA, FLAC, AIFF, DSD, and Apple Lossless • iPod Digital Transmission
192 kHz/24-bit audio playback: WAV, FLAC, and AIFF
Multi-channel audio playback (5.0/5.1, 24-bit)(*): WAV, FLAC
Gapless playback: • WAV, FLAC, AIFF, and Apple Lossless(**)
Via HDMI: • SACD
(*) Up to 96 kHz (**) Except multi-channel audio streaming
- MHL Terminal for Android Smartphones
- HD Audio Formats • Dolby TrueHD
• DTS-HD Master Audio
- Audio Return Channel
- Stand-by Pass Through
- Control with HDMI (+)
- On-Screen Display (GUI) Dot Matrix with Album Artwork (HDMI only)
7 languages: • Dutch • English • French • German • Italian • Russian • Spanish
- Sleep Timer
- Firmware updates (via Internet or USB)
- AVNavigator
- Bluetooth (Built-in, with aptX support)
- Internet Radio (vTuner)
- Spotify Connect (+)
- DLNA Certified (+) (v1.5)
- HTC Connect (+)
- Windows 8.1 Compatible
- Remote Control Glow-key, learning remote control
- Eco Mode
Input & Output connections
- Audio/Video Output
- Bi-Amplifier
- Component Video Input/Output 2/1 (assignable)
- Composite Video Input/Output 2/1
- Digital Optical Input/Output 2/- (assignable)
- Digital Coaxial Input/Output 2/- (assignable)
- Ethernet (+)
- HDMI Front Input
- HDMI Input/Output 7 (assignable) / 2
- HDMI version 2.0
- Headphone
- IR In/Out (+) 1/1
- Large speaker terminals
- Pre-amp Output (2.1 ch)
- Speaker A/B Versatile speaker configuration
- USB Host (Front) (+)
Apps
- iControlAV5 (+)
- AVNavigator Built-in
Apple Compatibility
- Works with iPod
- Works with iPhone
- AirPlay Compatible Generations Via USB:
• iPhone 5/5S/5C • iPhone 4/4S • iPhone 3G/3GS • iPhone • iPod touch 5G/4G/3G/2G/1G • iPod nano 7G/6G/5G/4G/3G
- Supported Functions • Audio playback
• On-screen album art • Battery charging
Network Features
- Wireless LAN (optional AS-WL300 adapter required)
- Network Standby
Surround Sound Formats
- Dolby Pro Logic IIz (+)
- Dolby TrueHD (+)
- DTS Neo X
- DTS-HD Master Audio (+)
- Surround Modes (+) 11+1 (Action, Drama, Advanced Game, Sports, Classical, Rock/Pop, Extended Stereo, Front Stage Surround, Sound Retriever AIR, ECO MODE 1, ECO MODE 2 + Phones Surround)
Audio Features
- AM/FM Tuner with RDS
- Tuner Pre-set Stations 63
- Auto Level Control (+) (Multi-channel)
- Auto Surround
- Bass/Treble Tone Controls
- Dialogue Enhancement (+)
- Digital Noise Reduction (+)
- DSD-to-PCM Convertor (2 channel / Multi-channel)
- Dynamic Range Control
- Wide Surround
- Headphone Surround
- Front Stage Surround Advance (+)
- Multizone Function (+) (2)
- Mute Level Setup
- Volume Limit Setup
- Power ON Level Setup
- Phase Control (+)
- Phase Control Plus
- Auto Phase Control Plus
- Automatic Crossover Detection
- MCACC (+) (Advanced)
- Manual MCACC
- PQLS (+) Bit-stream / Multi-surround / 2-channel
- Sound Delay (LipSync) (+)
- Auto Sound Retriever
- Auto Sound Retriever for ARC
- Sound Retriever AIR (+)
- Sound Retriever link
- Standing Wave Control (+)
- Stream Direct (+)
- Symmetric EQ (+)
- Subwoofer EQ
- Virtual Speakers
- Virtual Depth
- Virtual Surround Back (+)
- Virtual Height
- Virtual Wide
- X-Curve (+)
- Polarity Check
Video Features
- Frame Rate Conversion
- Deep Colour (+)
- 3D Ready
- 3D Noise Reduction
- Triple HD Noise Reduction
- x.v.Colour (+)
- Video Scaler
- Upscaling to 1080p
- 4K Pass Through
- 4K Upscaling
- 4K (MAIN ZONE) Up to 4K60p, 4:4:4, 24-bit
- 4K Dual (MAIN/HD ZONE) Up to 4K60p, 4:2:0, 24-bit
- Resolution Parameter • AUTO/PURE
• 480p • 720p • 1080i/ 1080p/ 1080-24p • 4K/4K-24p
- Aspect Through / Normal
- I/P Conversion
- Advanced Video Adjust
- PureCinema
- Stream Smoother
- Stream Smoother Link
- HDMI Standby Through
- HDMI Standby Input Switching
Power Output
- Condition 1kHz, 1% THD
- Rated Power Output • Simultaneous Power Output: 560W all channels
• 6Ω: 160W per channel • 4Ω: 200W per channel
- Input (Sensitivity/Imp.): LINE etc. 380 mV / 47 kΩ
- Signal-to-Noise Ratio: LINE etc. (DIN) 101 dB
- Power Requirements AC 220-230V / 50/60 Hz
- Power Consumption (in use / standby) 290 W / 0.1 W
- Auto Power Down
Construction
- Advanced Direct Construction
- Design • Insulated Dual Chassis
• Rigid Trans-Stabiliser
Amplifier Specifications
- Amplifier Direct Energy HD Amplifier
- Multi-channel Simultaneous Drive
- Digital Signal Processor Texas Instruments AureusTM (TMS320DA808)
- D/A Converter 192 kHz / 24-bit
- A/D Converter 96 kHz / 24-bit
- Hi-bit / Hi-sampling Hi-bit 24 processing
- Dimensions (W x H x D) 435 x 185 x 441 mm
- Weight 14.7 kg
|
Specs Video Features | Television Format | PAL | Input Level/Impedance | 1 Vp-p/75 ohms | Output Level/Impedance | 1 Vp-p/75 ohms | Video Frequency Response (Component Video) | 10 Hz – 8 MHz (–3 dB) | HDMI Input / Output | 4 K x 2 K | HDMI Version | 1.4 a with 3D support | FM Tuner Features | Frequency Range | 87.5 MHz – 108.0 MHz MHz | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | Distortion (Mono/Stereo) | 0.2%/0.3% | Stereo Separation @ 1kHz | 40 dB | Selectivity ±400kHz | 70 dB | Image Rejection | 80 | IF Rejection | 80 | AM Tuner Specifications | Frequency Range kHz | 522 kHz – 1,620 kHz kHz | Signal-to-Noise Ratio | 38 dB | Usable Sensitivity (Loop) | 425 µV | Distortion | 1.0% | Selectivity | (±10 kHz): 30 dB | General Specifications | Power Requirement | 220V - 240V AC, 50Hz/60Hz | Power Consumption (full power/idle) | 0.5 W (standby); 450 W maximum | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | Weight (Metric/English) | 4.6 kg (10 lb) | |
Slim 5.2Ch 4K Ultra HD AV Receiver with HEOS Built-in
Experience exceptional audio performance from the slim profile Marantz NR1510 5.2ch 4K Ultra HD AV receiver that drives elevated surround sound and high-fidelity audio from a compact chassis. At half the height of a traditional AV receiver, the NR1510 features the latest in HDMI connectivity and delivers high-resolution surround sound from Dolby TrueHD and DTS-HD Master Audio. Six HDMI inputs — including one on the front panel — support the latest video and picture formatting and eARC transmission of enhanced audio. Stream music from popular online sources, and easily connect your analog turntable to the receiver to enjoy your vinyl collection. Control the NR1510 with voice control compatibility via Amazon Alexa, Google Assistant and Apple Siri.
Key Features
- Slim profile that’s half the height of a traditional AV receiver delivers exceptional performance and the most musical sound
- 5-channel discrete power amplifier, 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2 Ch. drive)
- 6 HDMI inputs with full HDCP 2.3 support
- Supports Dolby Vision, Hybrid Log-Gamma (HLG), eARC and ALLM for enhanced picture and audio
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR10 and BT.2020
- Surround format support for Dolby TrueHD and DTS-HD Master Audio
- ALAC, FLAC and WAV lossless file decoding up to 24-bit/192-kHz for high-resolution listening
- HEOS Built-in for multi-room streaming, music streaming and voice control
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)
- Supports all major voice control agents and streaming services
- Integrated phono input to directly connect your turntable
Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
50 W |
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
60 W |
Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
100 W |
|
Reviews
There are no reviews yet.