| Content | 7.2-Channel Network A/V Receiver
Future-ready home entertainment with THX® Certified Select™
A harmonious mix of tech and tradition, the TX-NR696 adapts to entertainment life and finds the emotion in every sound source, from 3D film-scores to vinyl records. Next-Generation Network Audio gathers Chromecast built-in*1, Works with Sonos, AirPlay 2, and DTS Play-Fi® with streaming services for smooth multi-room audio evolved by support for the new high-speed 802.11ac (2x2 MIMO) Wi-Fi® specification*2. Dolby Atmos® and DTS:X® pull audiences deep into movies and games, THX Certified Select assuring a cinema-reference experience. If a 5.2.2-ch setup isn’t possible, Dolby Atmos Height Virtualizer*3 and DTS Virtual:X™*3 can create a 3D sound-field from horizontal speaker layouts. Zone 2 outputs bring amped multi-source audio to two rooms, while a flexible new zone line-out/front L/R pre-out terminal lets you listen how you want, where you want. With revitalized DAA system, 4K/60p/HDR HDMI® terminals, and many extras, this product excels in every aspect.
PRODUCT HIGHLIGHTS
- 175 W/Ch THX® Certified Select™ DAA system
- Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn*3
- Supports 5.2.2-ch Dolby Atmos® and DTS:X® playback
- Dolby Atmos Height Virtualizer*4 and DTS Virtual:X™*4
- HDMI Sub/Zone 2 output shares media to a second display or projector
- Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi® specification*5
- Zone 2/Zone B line-out/Front L/R pre-out with DAC shares D/A audio (including HDMI/SPDIF*6) or connects power amp
- Zone 2 outputs distribute D/A audio sources (including HDMI/SPDIF*6)
- Stereo Assign Mode to switch Front playback to Height channels
- DSP-based Vocal Enhancer improves dialog audibility
- GUI with OSD via HDMI features media input/output data display function
- HDMI supports 4K/60p, 4K HDR, 4:4:4/24-bit, BT.2020, HDCP 2.2
- AccuEQ with subwoofer EQ and AccuReflex™
- One-touch volume memory-presets for A/V inputsputs
AMPLIFIER FEATURES
- 175 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven)
- THX Certified Select certified Dynamic Audio Amplification
- Custom High-Current Low-Noise Power Transformer
- Large custom-made audio power capacitors
- Non-phase-shift amp topology with discrete output stage
- New dual-transistor amp output stages (L/R/C) doubles instantaneous current output for stunning dynamics and bass impact
- Strengthened power-supply line for high-current dynamics
- Refined HDMI grounds, short signal paths reduce noise
- SoC board remote from audio paths to reduce noise
- High-current drive handles 4-ohm speaker loads
- High-grade AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion
- VLSC™ (Vector Linear Shaping Circuitry) filtering (Front L/R)
- PLL (Phase Locked Loop) anti-jitter technology for S/PDIF audio
- Tone controls (bass/treble) for front L/R channels
- Pure Audio Mode and Direct Mode for high-fidelity sound
VIDEO & AUDIO SUPPORT
- Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision, HDR10, HLG), BT.2020, 4:4:4 color-space, 3D Video, ARC (Audio Return Channel), DeepColor™, x.v.Color™, and LipSync via HDMI
- Dolby Atmos, DTS:X, Dolby® TrueHD, and DTS-HD Master Audio® decoding
- Dolby Atmos Height Virtualizer and DTS Virtual:X 3D processing
- Dolby Surround® and DTS® Neural:X upmixing technology
- THX listening modes for movies, music, and games
- Sound optimization for games (Rock, Sports, Action, and RPG)
- SACD (Super Audio CD) playback via HDMI (2.8 MHz 2-ch/multichannel)
- Theater-Dimensional virtual surround-sound function
NETWORK FEATURES
- Next-Generation Network Audio with multi-room audio, streaming service integration, and remote app control
- Works with Sonos certified for the Sonos Home Sound System*7
- Chromecast built-in and voice control with the Google Assistant*8
- AirPlay 2 multi-room audio and voice control with Siri*9
- DTS Play-Fi® multi-room audio via Onkyo Music Control App*10
- FlareConnect™ multi-zone audio with compatible components
- Quad-core SoC processing evolves network functions and supports high-speed 802.11ac (2x2 MIMO) Wi-Fi specification
- Supports Onkyo Controller remote and music streaming app*10
- Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/ 2.8 MHz*11; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit*12)
CONNECTION TERMINALS
- 7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)
- 2 digital audio inputs (optical and coaxial, assignable)
- 4 analog RCA inputs (assignable)
- 3.5 mm mini-stereo analog input (front)
- 1 phono input with built-in MM equalizer for turntable
- 3.5 mm setup mic input for AccuEQ (front)
- 6.35 mm headphone jack (front)
- 2 subwoofer pre-outs
- Zone 2/Zone B line-out/Front pre-out (analog RCA)
- 7 screw-type speaker posts
- Ethernet terminal for network connection and IP control
- USB input (5 V/1 A) for audio playback (rear)
- AC socket for detachable power cable
ADVANCED FEATURES
- AccuEQ Room Acoustic Calibration and AccuReflex
- DSP Vocal Enhancer boosts dialog audibility via remote keys or front panel
- Bluetooth® wireless technology and Wake on Play Standby with auto input selection supporting select smart speakers
- Advanced Music Optimizer™ improves compressed audio playback
- Zone 2 speaker outputs for powered simultaneous multi-source D/A audio distribution (including HDMI/SPDIF) with Zone 2 DAC; output via Zone 2 and Zone 2 line-out
- Front/Height/Surround Back switching (layout dependent) for ambient listening in Stereo Assign Mode
- Zone 2/Zone B line-out/Front L/R pre-out (analog RCA) with Zone 2 DAC connects compatible audio systems for synced/independent D/A playback (including HDMI/SPDIF) in Main and Zone 2; connects compatible transmitters for wireless headphones; connects power amp for Front L/R speakers
- One-touch volume memory-presets for A/V inputs via front panel
- 1080p to 4K upscaling and GUI with overlaid OSD via HDMI
- Crossover adjustment for each channel(40/50/60/70/80/90/100/120/150/180/200 Hz)
- A/V Sync Control (up to 500 ms in 5 ms steps at 48 kHz)
- Various standby modes and HDMI pass-through
- IP control for home automation systems via LAN
- 3-Mode display dimmer (Normal/Dim/Dimmer)
- 40 FM/AM random presets
- Redesigned simple remote control
|
| Video Features |
|---|
| Television Format | PAL | | Input Level/Impedance | 1 Vp-p/75 ohms | | Output Level/Impedance | 1 Vp-p/75 ohms | | Video Frequency Response (Component Video) | 10 Hz – 8 MHz | | HDMI Input / Output | 4 K x 2 K | | HDMI Version | 1.4 a with 3D support |
| FM Tuner Features |
|---|
| Frequency Range | 87.5 MHz – 108.0 MHz MHz | | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | | Distortion (Mono/Stereo) | 0.2%/0.3% | | Stereo Separation @ 1kHz | 40 dB | | Selectivity ±400kHz | 70 dB | | Image Rejection | 80 | | IF Rejection | 80 | | AM Tuner Specifications |
|---|
| Frequency Range kHz | 522 kHz – 1,620 kHz kHz | | Signal-to-Noise Ratio | 38 dB | | Usable Sensitivity (Loop) | 500 µV | | Distortion | (1 kHz, 50% mod): 1.0% | | Selectivity | (±10 kHz): 30 dB | | General Specifications |
|---|
| Power Requirement | 220V - 240V AC, 50Hz/60Hz | | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | | Weight (Metric/English) | 5.1 kg (11 lb) | |
Specs | Video Features |
|---|
| Television Format | PAL | | Input Level/Impedance | 1 Vp-p/75 ohms | | Output Level/Impedance | 1 Vp-p/75 ohms | | Video Frequency Response (Component Video) | 10 Hz – 8 MHz (–3 dB) | | HDMI Input / Output | 4 K x 2 K | | HDMI Version | 1.4 a with 3D support | | FM Tuner Features |
|---|
| Frequency Range | 87.5 MHz – 108.0 MHz MHz | | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | | Distortion (Mono/Stereo) | 0.2%/0.3% | | Stereo Separation @ 1kHz | 40 dB | | Selectivity ±400kHz | 70 dB | | Image Rejection | 80 | | IF Rejection | 80 | | AM Tuner Specifications |
|---|
| Frequency Range kHz | 522 kHz – 1,620 kHz kHz | | Signal-to-Noise Ratio | 38 dB | | Usable Sensitivity (Loop) | 425 µV | | Distortion | 1.0% | | Selectivity | (±10 kHz): 30 dB | | General Specifications |
|---|
| Power Requirement | 220V - 240V AC, 50Hz/60Hz | | Power Consumption (full power/idle) | 0.5 W (standby); 450 W maximum | | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | | Weight (Metric/English) | 4.6 kg (10 lb) | |
Length No
Accessories Mic, Mic Stand, Remote Control
Amplifier 3000W Dynamic, 1250W RMS Power
Auto On/Off No
Cabinet Design N/A
Color Black
Dimensions: (H/W/D) 3.6" x 17" x 12.5" (9 x 43.2 x 31.8 cm) *Allow two extra inches in depth for wire conectors and detachable power cable. *Includes feet. Feet can be removed for rack mount use. Unit is approximately "two rack units" high.
HiPass Crossover 80 Hz (6 dB/octave)
LoPass Crossover 30 Hz-160 Hz, Defeatable, 24 dB/octave slope
Phase Control 0, 90, 180, 270 Degrees
Removable Grille No
Shipping Weight 30 lbs. (22.7 Kg)
Size Large
Voice Coil N/A
Warranty (N. Am.) Two years (electronics - parts & labor) |
Slim 7.2Ch 4k Ultra HD AV Receiver with HEOS Built-in
Hear the most musical sound from an elegantly slim profile. The Marantz NR1710 7.2ch 4k Ultra HD AV receiver drives immersive, high-fidelity audio from a compact chassis. At half the height of a traditional AV receiver, the NR1710 supports multi-dimensional audio formats Dolby Atmos, Dolby Atmos Height Virtualization Technology, DTS:X and DTS Virtual:X. Enjoy your extensive music collection with support for Hi-Res formats, a front-panel USB and phono equalizer to connect your turntable. Stream music from leading music services and control the NR1710 with voice control compatibility via Amazon Alexa, Google Assistant and Apple Siri. Eight HDMI inputs — including one on the front panel — support the latest video and picture formatting and eARC transmission of enhanced audio.
Key Features
- Slim profile that’s half the height of a traditional AV receiver delivers exceptional performance and sound quality
- 7-channel discrete power amplifier, 50W per channel (8-ohm, 20Hz – 20kHz, 0.08% THD, 2ch. drive)
- 8-HDMI inputs — including one on the front panel — with full HDCP 2.3 support
- Supports Dolby Vision, Hybrid Log-Gamma (HLG), eARC and ALLM for enhanced picture and audio
- 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR10 and BT.2020
- Immersive surround sound with Dolby Atmos, Dolby Atmos Height Virtualization Technology, DTS:X and DTS Virtual:X
- ALAC, FLAC and WAV lossless file decoding up to 24-bit/192-kHz for high-resolution listening
- HEOS Built-in for multi-room streaming
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support (dual antenna)
- Supports all major voice control agents and streaming services for seamless control
- Integrated phono input to directly connect your turntable
| Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
50 W |
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
70 W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
100 W |
| Marantz SR6013 9.2CH 4K Ultra HD AV Receiver with HEOS
Immerse yourself in premium sound and multi-dimensional audio with the Marantz SR6013 9.2 channel AV receiver. It features Dolby Atmos, DTS:X and DTS Virtual:X decoding for immersive home theater, and proprietary HDAM circuit boards for more detailed, dynamic sound. Eight HDMI inputs are fully compatible with the latest specifications, including 4K Ultra High Definition video, 60Hz video, HDR, Dolby Vision and Hybrid Log-Gamma. Listen to all your favorite music from your smart devices via Bluetooth, AirPlay or the HEOS app. Control the SR6013 with your voice and Amazon Alexa — download the HEOS Home Entertainment skill and ask Alexa to play, pause or stop music, switch inputs for your different media players, turn up the volume and more.
Key Features
- Now available – Apple AirPlay 2
- 9.2 channel AV Receiver with 110 W per channel (8 Ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive)
- 8 HDMI inputs (incl. 1 front) with full HDCP 2.2 support; 3 HDMI outputs
- Analog to HDMI conversion and full rate 4K Upscaling
- 4K/60 Hz full-rate pass-through, Dolby Vision compatibility, HDR, HLG and BT.2020
- Three-dimensional audio formats Dolby Atmos, DTS:X (up to 7.1.4 with an external 2ch amplifier) and DTS Virtual:X for height virtualization effects
- eARC (Enhanced Audio Return channel) supports the transmission of 3D audio from your TV apps with a single HDMI connection
- Stream music from Internet Radio, Spotify Connect, Pandora, SiriusXM, Amazon Music, TIDAL, Deezer and more with Bluetooth, Airplay2 or HEOS built-in
- Built-in Wi-Fi with 2.4GHz/5GHz dual band support
- Enjoy multi-room whole-home audio streaming with HEOS technology
- Amazon Alexa voice control via the HEOS Home Entertainment skill
- Marantz 2016 AVR remote app for control over the latest generation of Marantz network AV Receivers. Available on iOS and Android.
- High Resolution DSD (2.8/5.6MHz), FLAC, ALAC and WAV support
- AKM AK4458 32-bit D/A converters, HDAM circuit boards and Current Feedback circuitry for optimum fidelity and maximum dynamic range
- Suite of Audyssey room correction software: Audyssey MultEQ XT32, Dynamic Volume and Dynamic EQ, LFC and Sub EQ HT
- Seamless out-of-the-box experience with Quick Start Guide, guided Setup Assistant and Marantz AVR Remote app
- Hybrid PLL Clock Jitter Reducer for pristine sound that’s immune to disruptions in the surrounding circuit environment
Powerful Nine-channel Discrete Amplifier
Featuring discrete high-current power amplifiers on all channels, the SR6013 delivers 110 watts of power per channel (8 Ohm, 20 Hz - 20 kHz, 0.08% 2ch drive). With low impedance driver capability, it offers operational stability with a wide range of speakers for balanced, quality sound. Auto Eco Mode adjusts power output to speakers based on volume level and on-screen eco meter, providing power consumption reduction in real-time without sacrificing superb Marantz sound.
Latest HDMI Connectivity
Includes eight HDMI inputs — with one HDMI input on the front panel for quick connection — each one supporting HDCP 2.2, 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, Dolby Vision, HLG, High Dynamic Range (HDR), 21:9 video, 3D and BT.2020 pass-through. The video processor is capable of upscaling SD and HD video to 4K Ultra HD. Three HDMI outputs allow you to connect to multiple zones and run a TV and projector at the same time.
Supports Latest Object-based Audio Formats
Immerse yourself in multi-dimensional audio with the latest surround formats, including Dolby Atmos, DTS:X and DTS Virtual:X. DTS Virtual:X provides immersive audio without height channels, creating virtual height effects in a 5.1, 7.1 or 2.1 speaker arrangement.
| Power Output (8 ohm, 20 Hz - 20 kHz, 0.08% 2ch Drive) |
110 W |
| Power Output (8 ohm, 20 Hz - 20 kHz, 0.05% 2ch Drive) |
|
| Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive) |
150 W |
| Power Output (6 ohm, 1 kHz, 10% 1ch Drive) |
220 W |
|
Reviews
There are no reviews yet.