Content | 9.2-Channel Network A/V Receiver
A higher standard of sound
The TX-RZ740 not only elevates sound, but also that satisfied feeling you get every time you switch it on. The extra weight of the custom transformer, custom 10,000 μF capacitors, and aluminum heat-sink speak of an amp built for high-current power, enabling 3D audio to exhibit true-to-life spatiality and pin-point localization. Bass force is terrific, dynamics blindingly fast, and resolution grainless. Next-Generation Network Audio gathers multi-room platforms supported by 802.11ac*1 Wi-Fi®, or enjoy powered and unpowered audio distribution. The receiver, which supports up to 7.2.4-ch of 3D sound with external amp, is certified for IMAX® Enhanced*2 and is THX® Certified Select™ for a cinema-reference experience. From how it sounds to the way it makes you feel, the TX-RZ740 is made to savor now and in the future.
PRODUCT HIGHLIGHTS
- 185 W/Ch THX® Certified Select™ RZ Series DAA system
- Works with Sonos, Chromecast built-in*1, AirPlay 2, DTS Play-Fi®, FlareConnect™*2, Spotify®, Amazon Music, TIDAL, Deezer, TuneIn*3
- Supports 5.2.4-ch Dolby Atmos® and DTS:X® playback
- 11.2-ch pre-outs and processing for 7.2.4 layouts
- Dolby Atmos Height Virtualizer*4
- IMAX® Enhanced*4 certified for IMAX® digital remasters
- Refined HDMI® grounds, SoC board, and power amps
- HDMI Sub/Zone 2 output*5 for a sub-display or projector
- Quad-core SoC supports 802.11ac (2x2 MIMO) Wi-Fi®*6
- Zone 2 and Zone 3 speaker outputs
- Zone 2 and Zone 3 DACs for D/A audio in three rooms
- Zone 2/Zone B and Zone 3 line-outs share D/A audio
- Stereo Assign Mode supports Height-channel playback
- DSP-based Vocal Enhancer improves dialog audibility
- OSD features media input/output data display function
- HDMI supports 4K/60p, 4K HDR, BT.2020, HDCP 2.2
- AccuEQ Advance 9-point calibration with AccuReflex™
- Volume memory-presets for A/V inputs via front panel
- IP control, RS-232C, 12 V trigger output, and IR input
AMPLIFIER FEATURES
185 W/Ch (6 Ω, 1 kHz, 10% THD, 1 channel driven), 175 W/Ch (6 Ω, 1 kHz, 1% THD, 1 channel driven, IEC)
- Certified for IMAX Enhanced and THX Certified Select
- Dynamic Audio Amplification with RZ Series Build
- Ultra-wide 5 Hz–100 kHz frequency response
- Custom-Built High-Current Low-Noise Power Transformer
- Custom high-current smoothing capacitors
- Non-phase-shift amp topology with discrete output stage
- Thick resonance-controlled extruded aluminum heat-sink
- Strengthened power-supply line for high-current dynamics
- Refined HDMI grounds and short signal-paths reduce noise
- Isolated SoC board reduces interference
- High current capability for 4-ohm speaker drive
- AKM (AK4458) 384 kHz/32-bit multichannel D/A conversion
- VLSC™ (Vector Linear Shaping Circuitry) noise filtering (Front L/R)
- PLL (Phase Locked Loop) anti-jitter technology for SPDIF audio
- Direct and Pure Audio modes for source-authentic expression
-
VIDEO & AUDIO SUPPORT
Supports HDCP 2.2, 4K/60p, HDR (Dolby Vision™, HDR10, HLG), BT.2020, 4:4:4/24-bit, 3D Video, ARC (Audio Return Channel), DeepColor™, x.v.Color, and LipSync via HDMI
- Dolby Atmos, DTS:X, Dolby® TrueHD, and DTS-HD Master Audio®
- Dolby Atmos Height Virtualizer 3D processing
- Dolby Surround® and DTS® Neural:X upmixing technology
- IMAX Mode for IMAX Enhanced content
- THX® listening modes for movies, music, and games
- Sound optimization for games (Rock, Sports, Action, and RPG)
- Theater-Dimensional virtual surround-sound function
-
NETWORK FEATURES
Next-Generation Network Audio supports multi-room streaming and Onkyo Controller*7
- Works with Sonos for the Sonos Home Sound System*8
- Chromecast built-in and voice control*9 with the Google Assistant
- AirPlay 2 multi-room audio and voice control*10 with Siri
- DTS Play-Fi multi-room audio via Onkyo Music Control App*7
- FlareConnect multi-zone audio with compatible components
- Quad-core SoC supports high-speed 802.11ac (2x2 MIMO) Wi-Fi
- Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/2.8 MHz*11; FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit*12)
-
CONNECTION FEATURES
7 HDMI inputs (1 front), 2 outputs (Main [ARC], Sub/Zone 2)
- 1 component video input (assignable)
- 2 composite video inputs (assignable)
- 2 digital audio inputs (optical and coaxial, assignable)
- 6 analog RCA inputs (assignable)
- 3.5 mm mini-stereo analog input (front)
- 1 phono input with built-in MM equalizer for turntable
- 3.5 mm setup mic input for AccuEQ Advance (front)
- 6.35 mm headphone jack (front)
- 11.2-channel pre-outs including Zone 3 pre-/line-out (analog RCA)
- Zone 2/Zone B analog RCA line-level outputs
- 9 screw-type speaker posts (including Zone 2)
- Bi-directional Ethernet terminal for network and IP control
- USB input (5 V/1 A) for audio playback (rear)
- RS-232C serial port for remote control
- IR (infrared) input for remote-control extenders
- 12 V trigger output (Main, assignable, 100 mA)
- AC socket for detachable IEC power cord
|
The MM7055 power amplifier produces 140 watts of high current output from each of its five channels. This is "real world” power, too, measured across the full audio bandwidth (20 Hz – 20 kHz) at 8 ohms with 0.08% Total Harmonic Distortion. Among other attributes, this means the MM7055 is capable of long-term power delivery into low impedance speakers.
Front Panel | Aluminum/Glass-reinforced resin |
Power Consumption | 660W (Standby: 0.2W) |
Dimensions W x H x D (Inchs) | 17-3/8 x 7-3/16 x 15-1/8 |
|
Length No
Accessories Mic, Mic Stand, Remote Control
Amplifier 3000W Dynamic, 1250W RMS Power
Auto On/Off No
Cabinet Design N/A
Color Black
Dimensions: (H/W/D) 3.6" x 17" x 12.5" (9 x 43.2 x 31.8 cm) *Allow two extra inches in depth for wire conectors and detachable power cable. *Includes feet. Feet can be removed for rack mount use. Unit is approximately "two rack units" high.
HiPass Crossover 80 Hz (6 dB/octave)
LoPass Crossover 30 Hz-160 Hz, Defeatable, 24 dB/octave slope
Phase Control 0, 90, 180, 270 Degrees
Removable Grille No
Shipping Weight 30 lbs. (22.7 Kg)
Size Large
Voice Coil N/A
Warranty (N. Am.) Two years (electronics - parts & labor) |
Main Features
-
Direct Energy HD amplifier
-
Output Power per Channel240W
-
Impedance at Output Level4Ω
-
Number of Channels7
-
4Ω Speaker Support
-
Signal / Noise Ratio101 dB
-
Input ConnectionsFront: • 1 x HDMI • 1 x USB 2.0 (iPod/iPhone Digital Audio, USB drive) • 1 x MCACC Setup MIC
Rear: • 6 x HDMI (1 for HDMI/MHL) • 1 x Ethernet • 2 x AV Composite • 1 x Audio (Assignable) • 2 x Digital Coaxial (Assignable) • 2 x Digital Optical (Assignable) • 2 x Component Video (Assignable) • 1 x IR • 1 x USB charge port for AS-WL300 Wireless Converter • 2 x 12V Trigger (RS-232C)
-
Output ConnectionsFront: • 1 x Phones out
Rear: • 2 x HDMI (selectable for MAIN ZONE/HDZONE) • 1 x AV Composite • 1 x Monitor Component • 1 x Monitor Composite • 1 x IR • 2 x Preout Subwoofer • 9 x Speaker out
-
File Playback• AM/FM Tuner (63 presets) • Internet Radio with vTuner • Spotify Ready • Apple AirPlay
Via LAN//USB: • MP3, WAV, AAC, WMA, FLAC, AIFF, DSD, and Apple Lossless • iPod Digital Transmission
192 kHz/24-bit audio playback: WAV, FLAC, and AIFF
Multi-channel audio playback (5.0/5.1, 24-bit)(*): WAV, FLAC
Gapless playback: • WAV, FLAC, AIFF, and Apple Lossless(**)
Via HDMI: • SACD
(*) Up to 96 kHz (**) Except multi-channel audio streaming
-
MHL Terminal for Android Smartphones
-
HD Audio Formats• Dolby TrueHD • DTS-HD Master Audio
-
Audio Return Channel
-
Stand-by Pass Through
-
Control with HDMI (+)
-
On-Screen Display (GUI)Dot Matrix with Album Artwork (HDMI only)
7 languages : • Dutch • English • French • German • Italian • Russian • Spanish
-
Sleep Timer
-
Firmware updates (via Internet or USB)
-
AVNavigator
-
Bluetooth (Built-in, with aptX support)
-
Internet Radio (vTuner)
-
Spotify Connect (+)
-
DLNA Certified (+) (v1.5)
-
HTC Connect (+)
-
Windows 8.1 Compatible
-
Remote ControlGlow-key, learning remote control
-
Eco Mode
Input & Output connections
-
Bi-Amplifier
-
Component Video Input/Output2/1 (assignable)
-
Composite Video Input/Output2/1
-
Digital Optical Input/Output2/- (assignable)
-
Digital Coaxial Input/Output2/- (assignable)
-
Ethernet (+)
-
HDMI Front Input
-
HDMI Input/Output7 (rear) / 2
-
Headphone
-
IR In/Out (+)1/1
-
Large speaker terminals
-
Pre-amp Output, All (7.1 ch)
-
Speaker System Settings• Normal (SB/FH/FW) • Speaker B • Front Bi-Amp • ZONE 2 • HDZONE
-
RS-232C
-
Speaker A/BVersatile speaker configuration
-
USB Host (Front) (+)
Apps
-
iControlAV5 (+)
-
AVNavigatorBuilt-in
Apple Compatibility
-
Works with iPod
-
Works with iPhone
-
AirPlay
-
Compatible GenerationsVia USB: • iPhone 5/5S/5C • iPhone 4/4S • iPhone 3G/3GS • iPhone • iPod touch 5G/4G/3G/2G/1G • iPod nano 7G/6G/5G/4G/3G
-
Supported Functions• Audio playback • On-screen album art • Battery charging
Network Features
Surround Sound Formats
-
Dolby Pro Logic IIz (+)
-
Dolby TrueHD (+)
-
DTS Neo X
-
DTS-HD Master Audio (+)
-
Surround Modes (+)11+1 (Action, Drama, Advanced Game, Sports, Classical, Rock/Pop, Extended Stereo, Front Stage Surround, Sound Retriever AIR, ECO MODE 1, ECO MODE 2 + Phones Surround)
Audio Features
-
AM/FM Tuner with RDS
-
Tuner Pre-set Stations63
-
Auto Level Control (+) (Multi-channel)
-
Auto Surround
-
Bass/Treble Tone Controls
-
Dialogue Enhancement (+)
-
Digital Noise Reduction (+)
-
DSD-to-PCM Convertor (2 channel / Multi-channel)
-
Dynamic Range Control
-
Wide Surround
|
Yamaha boasts over 60 years of history as an audio brand. And the technology of R-N803D comes directly from Yamahaʼs legendary Hi-Fi design concept ToP-ART (Total Purity Audio Reproduction Technology), which faithfully maintains the integrity of the audio by combining a meticulously symmetrical left / right circuit layout and signal directness (straightest, shortest signal paths) with a low-vibration chassis of high rigidity, equipped with the special resin frame "Art Base” that absorbs and blocks unnecessary vibration. It maintains sonic purity and accurate stereo image of the music to create unshakeable drivability.
Output Power: |
160 W + 160 W (4 ohms, 1kHz, 0.7% THD) |
Dynamic Power/Channel (8/6/4/2 Ohms): |
140 / 170 / 220 / 290 W |
USB Input: |
Yes |
Network Port: |
Yes |
AM/FM Tuner: |
Yes |
Dimensions (W x H x D): |
435 x 151 x 392 mm (with antenna up: 435 x 215 x 392 mm) |
Weight: |
11 kg |
|
Enjoy immersive multi-channel sound with the Denon AVR-X2600H 7.2-Channel Network A/V Receiver. It delivers up to 95W of power at 8 Ohms and features Dolby Atmos and DTS:X compatibility for object-based audio support. Built-in Bluetooth and AirPlay 2 support allows the receiver to wirelessly stream music from compatible sources, such as smartphones and tablets. Onboard Wi-Fi and Ethernet connectivity enables the AVR-X2600H to access a variety of internet-based music sources. The receiver can be controlled via, and integrated into, your Google Assistant, Amazon Alexa, or Apple Siri ecosystem.
With eight HDMI inputs and two HDMI outputs, this receiver can act as a video switcher for your HD source components. It will pass through 4K signals along with HDR10, HLG, and Dolby Vision HDR formats. The receiver also has a USB port for accessing media stored on compatible USB flash drives. The Denon Setup Assistant will appear on your HDMI-connected display to help you through the setup process.
Dolby Atmos
Dolby Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the sound designer the ability to precisely place sounds anywhere in the 3-dimensional space. The AVR-X2600H features the ability to connect a 5.2-channel surround sound speaker system with two additional overhead speakers, or two additional Dolby Atmos-certified up-firing speakers.
DTS:X
DTS:X brings the home theater experience to new heights with its immersive object-based audio technology, which removes the bounds of channels. The flexibility of objects allows for sound to be scaled large or small and moved around the room, leading to a richer, more immersive audio experience in a 5.2.2-channel configuration.
DTS Virtual:X and Dolby Atmos Height Virtualization
DTS Virtual:X and Dolby Atmos Height Virtualization enable you to enjoy an immersive sound experience from as little as a 2.1-channel system, creating virtual height effects.
4K Ultra HD, HDR10, HLG, Dolby Vision, and HDCP 2.2 Support
Featuring six HDMI ports, including one located on the front panel, plus an HDMI output, the AVR-X2600H is compatible with 4K Ultra HD 60 Hz content, 4:4:4 Pure Color sub-sampling, BT.2020, 21:9 video, 3D, eARC, and HDR pass-through. All HDMI ports are HDCP 2.3-compliant for 4K UHD copy-protected content. HDR10, HLG, and Dolby Vision pass-through are supported for enhanced contrast and color with compatible displays and content. 3D audio is passed through from your compatible display to the receiver via eARC over HDMI.
All-Zone TV Audio
Play the audio from your display to all zones over analog or digital connections.
Designed for Easy Setup
The receiver guides you through the setup process to help ensure proper configuration. Once you connect the receiver to your display via HDMI, the Denon Setup Assistant appears on your screen to walk you through the setup. The color-coded speaker connectors are laid out horizontally to help simplify organization and connection of your speaker wires.
Amazon Alexa Voice Control
Control the receiver hands-free with Amazon Alexa and your voice. The HEOS Home Entertainment Skill enables voice commands to control a range of functions on the receiver (and other compatible HEOS and Denon devices), including volume control, transport control, next track, and external input switching.
Google Assistant Voice Control
Start music in the HEOS app, then ask your Google Assistant to control volume, play, pause, skip tracks, and more.
Apple AirPlay 2 Built-In
Use AirPlay 2 to stream Apple music wirelessly to the receiver, or group it with other AirPlay-compatible speakers to fill your home with music.
Built-In Bluetooth and Wi-Fi Capability
Additional wireless connectivity is provided by Wi-Fi and Bluetooth. The dual-antenna transceiver system helps provide robust streaming, even in congested wireless environments.
HEOS Wireless Multi-Room Music Streaming
Share music stored on your home network, internet radio, or streaming services with your HEOS wireless speakers, or other optional HEOS-capable receivers, throughout the house. Control it all with the free HEOS app, Alexa, the Google Assistant, or Siri.
High-Resolution Audio Support
The receiver uses AKM 32-bit D/A converters for decoding audio from a variety of lossless file types, including ALAC, FLAC, and WAV at up to 24-bit / 196 kHz, along with compatibility for 2.8/5.6 MHz DSD files, which is the audio coding format of SACD. You can play them from memory devices or network sources. The AVR-X2600H also supports other file types such as MP3 and WMA.
Ready for Custom Installation
This receiver features external control and IP control capabilities for easy customization and compatibility with third-party and custom integration solutions. It features IP control capability for 3rd-party control devices and Control4 SDDP (Simple Device Detection Protocol) certification for simple integration with Control4 home automation equipment.
Remote Monitoring Capability
To support quick, reliable assistance from integrators, the AVR-X2600H features ihiji Invision, Domotz Pro, and OvrC remote monitoring and management interface and service compatibility. These programs allow custom integrators to monitor the status of connected products and troubleshoot remotely from the office or on the go, reducing the time it takes to address the issue.
Game Mode
This mode supports Auto Low Latency Mode (ALLM) for virtually lag-free gaming.
Amplifier
Channels |
7.2 Object-Based Configuration:: 5.2.2 |
Power Output per Channel |
2-Channel Driven: 95 W at 8 Ohms / 20 Hz to 20 kHz / 0.08% THD 125 W at 6 Ohms / 1 kHz / 0.7% THD 1-Channel Driven: 150 W at 6 Ohms / 1 kHz / 1% THD |
Frequency Response |
10 Hz to 100 kHz +1/-3 dB (Direct Mode) |
Speaker Impedance |
4 to 16 Ohms |
Audio Processing
DTS Compatibility |
DTS:X |
Dolby Compatibility |
Dolby Atmos |
Auro 3D Support |
No |
Upmixing Technology |
DTS Virtual:X |
Video
HDR Compatibility |
HDR10, Dolby Vision, Hybrid Log Gamma |
Pass-Through Support |
4K60p 4:4:4 (BT.2020) |
Connectivity
Rear A/V Inputs |
7 x HDMI 2 x Optical TOSLINK 1 x Digital Coaxial 2 x 3RCA Component 2 x RCA Composite 4 x Stereo RCA 1 x Stereo RCA (Phono) with Ground Screw |
Rear A/V Outputs |
2 x HDMI 1 x 3RCA Component 1 x RCA Composite 2 x RCA Subwoofer Pre-Out 1 x Stereo RCA Zone 2 Pre-Out |
Front I/O |
1 x 1/4" / 6.35 mm Headphone Output 1 x USB Type-A 1 x 1/8" / 3.5 mm Setup Mic Input 1 x HDMI |
Other Rear I/O |
1 x FM Antenna Terminal 1 x AM Antenna Terminal 1 x RJ45 (Ethernet) 1 x 1/8" / 3.5 mm (IR) Input 1 x 1/8" / 3.5 mm (IR) Output 1 x DE-9 (RS-232C) Input 2 x Bluetooth/Wi-Fi Antenna Terminal |
Speaker Connectors |
7 x Binding Post Pairs |
HDCP Support |
Version 2.2 |
Input Impedance |
47 kOhms |
Input Sensitivity |
200 mV |
Signal to Noise Ratio |
100 dB (Direct Mode) |
Wireless Connectivity
Wi-Fi |
Yes |
Bluetooth |
Yes |
Wireless Audio Protocols |
AirPlay 2 |
Tuner Section
Tuner Type |
AM, FM |
Radio Frequencies |
AM: 520 to 1611 kHz FM: 87.5 to 108 MHz |
Power
AC Input Power |
120 VAC, 60 Hz |
Power Consumption |
Active: 500 W No Sound (ECO On): 35 W No Sound: 75 W |
Physical
Dimensions (W x H x D) |
17.1 x 6.6 x 13.4" / 434.3 x 167.6 x 340.4 mm |
Weight |
20.7 lb / 9.39 kg |
|
Reviews
There are no reviews yet.