Content |
The Crush Bass 50 features an EQ circuit inspired by our prestigious 4 Stroke Series amplifiers. At its centre is a parametric mid band. This presents players with a much greater degree of control over the sound than a traditional EQ, allowing them to vary the frequencies they want hear. The mid band covers a wide range, sweeping from 300Hz (fully counter-clockwise) to 2.7kHz (fully clockwise), meaning this amp can be fine tuned to suit any musical style. The active circuitry allows for up to 15dB of boost or cut on the bass and middle frequencies, and up to 20dB on the treble side.
Lifted straight from our popular OB1 Series amps, the Blend and Gain controls are a nod to the many bass players who experiment with guitar and bass amps simultaneously. In this ʽbi-ampedʼ setup, layers of harmonics and distortion from the guitar amp are blended with the core bass tone to create the ultimate full-range live sound. The Crush Bass 50ʼs Gain and Blend controls create the same effect in a single package, adding extra bite and crispness to the tone at lower gain settings, right up to all-out filth with the dials cranked. These controls can also be engaged remotely with the optional FS-1 footswitch, ideal for fattening your tone on the fly.
|
Product Features:
Extremely versatile bass amplifier
Powerful 20-Watt, 8'' BUGERA speaker
VTC Virtual Tube Circuitry for tube-like sound
Dedicated 4-band EQ for ultimate sound shaping
CD input allows you to play along to your favorite music
Separate headphone output—perfect for quiet practicing
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Marshall VBC810 Bass Amplifier Cabinet for use with VBA400
The VBC810 is a specially designed, heavy duty 8x10" cabinet for use with the VBA400 head. Built as only Marshall knows how, it features four separate sealed chambers which help to prevent unwanted cabinet resonance while adding to the structural integrity of the unit. It is also lined with sound absorbent wadding to further help dampen internal resonance.
It comes loaded with custom designed loudspeakers which have been specially designed to handle the power of the VBA400's output while giving you superb, professional performance. Operating at 4 Ohms impedance it has been designed to perfectly complement the VBA400. As the amplifier will accept a load of 2 Ohms, combinations of two cabinets can be used to create an awesome bass rig.
Clad in Marshall's trademark, heavy duty, black vinyl, the 640 Watt VBC810 boasts roadworthy, high grade fittings, including a recessed handle on the bottom for easy lifting, castors and kick plate for easy tilt and roll capability.
Speaker Configuration 8x10" Power Handling (RMS) 640W Impedance 4 Ohms Weight - 73 kgs Dimensions (mm) 675x1265x410
|
The more aggressive tone of the 10” speakers means you can often get by just with this combo, but it does also stack with any 8 ohm Traveler or Standard cab, for more volume and headroom. The CMD 102P combo just might be our most versatile combo! It's perfect for any situation. The angled cabinet design allows the unit to be used either as a floor monitor or in standard vertical position. The built-in VLE and VPF filters help create a warm and natural sound.
|
The 120 watt RB5 : Portable (top handle plus sprung side handles), Versatile (dual position 'kickback' style cabinet, switchable compressor and limiter, parametric EQ and presence control), and above all, Laney!. What more could you want?
Power | 120 Watts | Driver | 1 x 12'' Celestion & Switchable horn | Effects | - | Modeling Technology | - | Channels | 1 | Equalizer | Bass, Parametric Mid, Treble | Output | Extension Loudspeaker, Tuner Out | Inputs | Normal Input, High Input | Tuner | - | Controls | Gain, Compressor, Enhance, 4 Band EQ, Presence, Master Volume | Footswitch | - | FX Loop | FX Send / FX Return | DI Socket | D.I Balanced XLR | Dimensions ( W x H x D ) | 42 εκ x 48,2 εκ x 44,5 εκ | Weight | 20 kg |
| The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. |
Reviews
There are no reviews yet.