Content |
The Crush Bass 50 features an EQ circuit inspired by our prestigious 4 Stroke Series amplifiers. At its centre is a parametric mid band. This presents players with a much greater degree of control over the sound than a traditional EQ, allowing them to vary the frequencies they want hear. The mid band covers a wide range, sweeping from 300Hz (fully counter-clockwise) to 2.7kHz (fully clockwise), meaning this amp can be fine tuned to suit any musical style. The active circuitry allows for up to 15dB of boost or cut on the bass and middle frequencies, and up to 20dB on the treble side.
Lifted straight from our popular OB1 Series amps, the Blend and Gain controls are a nod to the many bass players who experiment with guitar and bass amps simultaneously. In this ʽbi-ampedʼ setup, layers of harmonics and distortion from the guitar amp are blended with the core bass tone to create the ultimate full-range live sound. The Crush Bass 50ʼs Gain and Blend controls create the same effect in a single package, adding extra bite and crispness to the tone at lower gain settings, right up to all-out filth with the dials cranked. These controls can also be engaged remotely with the optional FS-1 footswitch, ideal for fattening your tone on the fly.
|
Eden WTX264 Bass Amplifier Head Features: >Eden's proprietary Enhance control >3-band EQ with Dynamic Bass Boost and Mid-shift functions >Studio-quality DI with level and ground lift >FX loop >Stereo Aux Inputs >Tuner and Headphone outputs >Two 1/4" and one NL-4 (Speakon) Speaker outputs >Optional Rack-mount hardware >Power 4 Ohms: 260-300W RMS @4 Ohms >Damping Factor: 4000 >Distortion: .006% >Frequency Response: 10Hz-20KHz ±2dB >Headroom: 3dB >Dimensions: 8“W X 2.5“H X 9“D >Weight: 4.3 LBS |
Ampegʼs Portaflex PF-500 bass head delivers a staggering 500W of power in an ultra-compact design providing pure Ampeg tone in an extremely portable package. Precise tone controls and gig-friendly input/output options provide ultimate flexibility. Pair it with our PF Series flip-top cabinets for the vintage styling and portability of Ampegʼs iconic Portaflex originals.
Power: | 500W RMS @ 4 ohms 5% THD | Channels: | 1 | Equalizer: | 3 band EQ | Inputs: | Bass Input, Audio Input, Power Amp In | Outputs: | Headphones Output, Speaker Output Speakon, Tuner Out, Preamp Out, XLR Line Out Jack | Controls: | Mute, -15db, Compression, Gain, Ultra Hi / Lo, 3 Band EQ, Frequency, FX mix, Volume | Dimensions ( W x H x D ): | 27.5 x 6.9 x 27.2 cm | Weight: | 3.5 kg |
| The world-renowned Classic Series Cabinets are synonymous with bass enclosures and the sound they are expected to produce. And because we know that players have different tastes, we make the configuration YOU are looking for. From the undeniable tone of the SVT-810E to the unexpected low end of the extended range SVT-410HLF, Ampeg enclosures have set the standard for decades. All enclosures feature dual Neutrik Speak-On(r) and 1/4' input/output jacks. Cabinets using high frequency horns contain a variable level attenuator. To prevent overpowering and damaging the horns, a resistive bulb is wired in series with the horn for protection. |
Eden E300 Bass Amplifier Head - Lightweight and Compact. Eden's Proprietary Enhance Control deliver classic Eden tone. The Eden E300 bass amplifier head is a 300 watt head featuring stereo aux tape or cd input, auto compression, Enhance, 3 band eq, balanced DI, and headphones jack output. Eden E300 Bass Amplifier Head Features: > 300 Watts RMS @ 4 Ohms +/-3dB. > 3 band tone with Enhance control > Front panel 1/8" MP3 input for practice & rehearsal > Front panel Aux in > Front panel XLR DI > Headphone out > Dimensions: 15.8 x 10.3 x 3.4 inches > Weight: 32 LBS
|
All of our BG250 combos share the same fundamental tone, yet they alsosound unique. Subtle details and the fact that you can customize the amps with TonePrint effects and settings makes sure that you will always be able to get the sound you are looking for no matter which BG250 you choose.
- Ultra-light, Ultra-powerful
- Two TonePrint Slots
- Intelligent Tone Shaping Tools
- Built-in Tuner for 4, 5 and 6 String Basses.
BG250-112 gives you the best from both worlds. Tight and powerful sound with a strong presence in the mids. Make it bassy and old school, or modern and crisp. The choice is yours! It's light yet super powerful,features intelligent tone shaping toolsand has an onboard tuner for 4, 5 and 6 string basses.Add to that, the ultimate effects solution: Dual TonePrint! You can swap effect types on the fly and you even get custom TonePrints created by some of the greatest bass players totally free of charge.
Power: | 200 Watts> | Speaker: | 1 x 12'' | Modeling Technology: | No | Effects: | Yes | Tuner: | Υes | Power: | 250 Watts | Driver: | 1 x 12'' Custom driver woofer,1 x 1'' Custom piezo tweeter | Effects: | 6 Effect Types | Modeling Technology: | - | Channels: | 1 | Equalizer: | Bass: Cut@80Hz / Boost@100Hz,Mid: Cut@500Hz / Boost@800Hz,Treble: Cut@1,800Hz / Boost@2,500Hz | Output: | 1x Balanced Di Out - Seamless Recording or PA output - Headphone out x 1 | Inputs: | 1 x Rehearsal Input | Tuner: | Yes | Controls: | Gain, Bass, Middle, Treble, Toneprint A/B, Master, Mute, Pre EQ/Post EQ | Footswitch: | Yes ( Optional ) | FX Loop: | - | DI Socket: | Yes | Dimensions ( W x H x D ): | 45,8 x 37.5 x 54 cm. | Weight: | 16 kg |
|
Reviews
There are no reviews yet.