Content |
Building on the platform of the CR60C, the larger CR120C combo takes the same preamp circuitry and couples it to a 120 Watt output section. The extra power yields even more clean headroom at high volumes, ideal for glassy arpeggiated chords. The bigger output stage and 2?12” speakers help to fill the room, making the CR120C a great partner for larger venues. Complete with professional details like a super transparent, fully buffered effects loop, footswitchable digital reverb (hall/spring/plate) and 18mm birch plywood construction, the CR120C will always perform, wherever your music takes you.
The Clean channel is a vintage-inspired design, with plenty of sparkle. As the volume control increases, the amp begins to break up into bluesy crunch at higher settings with musical, touch sensitive overdrive. The overall output volume can then be reduced to ʽbedroom levelsʼ with global master volume. The Dirty channel takes its roots from the Rockerverb, covering a wide dynamic range with four stages of gain. Even at the limit, the Dirty channel remains tight and focused with sustain for days!
|
* 30-watt, 2x12" combo guitar amplifier
* Two channels with independent volume controls — Normal and Top Boost
* Reverb and Tremolo effects onboard (controllable via optional footswitch)
* Master volume section with Tone Cut and Volume controls
* True bypass effects loop for bringing in your own pedals
* Switchable 8-/16-ohm output jack for external speakers (mutes internal speakers)
* 16-ohm output jack for running a cabinet along with the internal speakers
* Features two 12" 8-ohm Celestion G12M Greenback speakers
* Uses 3 x 12AX7 preamp tubes and 4 x EL84 power tubes
* Dimensions (W x D x H): 27.64" x 10.43" x 21.89“
* Weight: 70.99 lbs.
| The MS-4 is the ultimate in portable battery/mains adapter operated micro amps, packing a full 4 Watt of Marshall tone into a tiny case. This mighty micro Marshall half-stack has switchable Clean and Overdrive modes. A single Tone control provides full focus of bass to treble.
Technical Info
Dimensions (H x W x D): 26 x 11 x 6cm
Finished in traditional Marshall black
White logo
Gold panel
Power Supply: 9V Battery or AC adaptor (not included).
Headphone Out. |
The AD15VT-XL is part of the NEW VOX Valvetronix XL line, an exciting new range of tube-powered modelling amplifiers that delivers the power and punch that modern rock players require, with a selection of hi-gain sounds that span the entire range of heavy rock music.
Features of the Vox AD15VT XL:
Eleven amp sounds
Sophisticated modelling technology is used to provide eleven different amps, including classic vintage amps of the past, costly, modern high-end amps and high-gain hybrids, all accessible at the turn of a knob. These new models include Glass, modelled on the Clean channel of a collectable 100-Watt head named the Overdrive Special; Funked, modeled on a classic American black-faced 2x12 combo; Buzzsaw, inspired by the British-made 50-Watt head that created the sounds of ʽ70s hard rock and metal; Crunched, based on a very rare modded VOX AC30/6TBX Top Boost combo, adding new hot-rodded gain levels and EQ; Thrashed, modelled on a 1983, all tube, single channel, master volume 100-Watt head; Raged, based on the high gain channel of a modern, all-tube 100 Watter, with boosted bass and mid frequencies and even more gain; Modern, a still higher gain modification to the "Modern High Gain” channel, with scooped EQ; Fluid, the UK Modern setting with maximum gain and mid-range EQ, modified to emphasize a vocal-like tone for legato-style playing; Molten, based on VOXʼs US Hi-Gain model but capable of even more powerful, heavily saturated sounds, with an Octave effect mixed into the preset; Black, a version of the UK Modern mutated to Class A, rather than Class AB; and Damaged, rooted in VOXʼs US Hi-Gain model with more gain and a completely re-voiced and modified EQ to be thicker and darker.
Eleven high-quality effects
Are built in, including compressor, delay, reverb, compressor & chorus, compressor & phaser, chorus & delay, chorus & reverb, flanger & reverb, tremolo & reverb, and rotary & reverb, plus Noise Reduction. New for th XL series is an Octave effect for massive lead tones. Effect parameters are fully adjustable and a Tap button makes it easy to set your delay time or modulation speed.
Store amp and effect settings
Store your favourite amp and effect settings as a program, containing two different settings (CH1 and CH2). Switch between these settings from the top panel, or by using the optional VFS2 foot switch connected to the rear panel. In addition, there is a preset program for each amp type.
Manual mode
In Manual mode the sound you hear reflects the physical settings of the knobs. Youʼre in control. Connect an optional VFS2 dual foot switch (sold separately) to switch programs or bypass effects. A power level control (not available on AD15VT-XL) adjusts the output wattage of the power amp. This means that even when the master volume is turned up all the way to drive the Valve Reactor power amp, you can adjust the volume without losing any tone.
Specifications of the VOX AD15VT XL - Number of amp types: 11
- Number of effects: 11
- Noise reduction: 1
- Number of programs: 11 preset, 2 channel
- Input/output jacks:
- Top panel: 1 x INPUT
- Rear panel: 1 x FOOT SW jack, 1 x LINE/PHONE jack
- Power amp output: Maximum 15W RMS @ 8 ohms
- Speaker: 1 x VOX original (10 inch 8 ohm)
- Weight: 11kg/24.25lbs
- Options (sold separately): VFS2 dual foot switch
|
Product Description
MG101CFX is a Carbon Fiber outfitted, 100 Watt 1x12 inch guitar combo amplifier with FX!
Features
- Modern Brushed Silver Panel and Carbon Fiber Look Vinyl
- New Programmable FX Include Studio and Spring Reverb; Octave Plus Reverse Delay
- 3 Simultaneous Digital FX at once
- 4 Programmable Analog Channels- Clean, Crunch, OD1, OD2
- Stompware pedal friendly
- 3 Band EQ
- Programmable Speaker Damping
- MP3 Input
- Headphone Jack
- 1x12 in. Speaker combo
- 100 watts
|
The 2266C 50-watt 2X12 combo is an all-valve single channel amplifier with a choice of 2 "dynamic ranges" selectable by a footswitch. The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the '70s.
Specification
Output (RMS): 50 watts
Speakers: 2 x G12C
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 2 x KT66
Footswitch (Supplied): PEDL-00041
Dimensions (mm): 690 x 5700 x 270
Weight (kg): 30
|
Reviews
There are no reviews yet.