Content | Despite its sleek white styling, the Elektro isn't just another pretty face. Also featuring a reinforced rubber suspension, the Elektro is the perfect hybrid needle for the artist who both mixes and scratches. Enhanced tracking ability and excellent sound quality combine to form a unique balance of form and functionality. With bold, round sound, the Elektro brings your music to life, whether you're in the club or the studio.
Output voltage at 1000Hz, 5cm/sec. |
7.5 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
25 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at -3dB |
20-22.000 Hz |
Frequency response |
20-15.000 Hz 3dB/-2dB |
Tracking ability at 315 Hz at recommmende tracking force |
80 μm |
Compliance, dynamic lateral |
6 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
3,0-5,0 g (30-50 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge weight |
18,5 g |
Replacement stylus unit |
Elektro |
|
NUMARK'S ALL–AROUND CHAMP, FOR DURABILITY AND RELIABILITY
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.
Output voltage at 1000Hz, 5cm/sec.
|
7 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
25 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range at -3dB
|
20-20.000 Hz
|
Frequency response
|
20-15.000 Hz 3dB/-2dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
|
Compliance, dynamic lateral
|
6 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0-5,0 g (30-50 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
750 Ohm
|
Internal inductance
|
450 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-600 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
|
scratch
|
|
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
|
2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
TECHNICAL DATA |
| Output voltage at 1000 Hz, 5cm/sec. | 5 mV | Channel balance at 1 kHz | 1 dB | Channel separation at 1 kHz | 26 dB | Channel separation at 15 kHz | 15 dB | Frequency range at - 3dB | 20-29.000 Hz | Frequency response | 20-20.000 + 2 / - 0 dB | Tracking ability at 315Hz at recommended tracking force | 80 µm | Compliance, dynamic, lateral | 22 µm/mN | Stylus type | Nude Fine Line | Stylus tip radius | r/R 8/40 µm | Tracking force range | 1,4-1,7g (14-17 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 1,2 kOhm | Internal inductance | 630 mH | Recommended load resistance | 47 kOhm | Recommended load capacitance | 150-300 pF | Cartridge colour, body/stylus | Black/Bronze | Cartridge weight | 7,2 g | Replacement stylus unit | 2M Bronze | |
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz, 5cm/sec. 8 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 22 dB Channel separation at 15 kHz 15 dB Frequency range 20-20.000 Hz Frequency response 20-18.000 Hz -3 /- 2dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 m Compliance, dynamic, lateral 12 m/mN Stylus type Spherical Stylus tip radius R18 Equivalent stylus tip mass 0,6 mg Tracking force range 2-4 g (20-40 mN) Tracking force, recommended 3,0 g (30 mN) Tracking angle 20 Internal impedance, DC resistance 1325 Ohm Internal inductance 765 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus Red/Red Cartridge weight 18,5 g Replacement stylus unit Digitrack |
Reviews
There are no reviews yet.