ORTOFON Concorde MkII DIGITAL TWIN Cartridge DJ

235.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: MkII DIGITAL TWIN Category:
Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding • At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation […]

 

Read more

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding

• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. 
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Concorde DIGITAL technical data

  • Stylus Type Spherical
  • Tracking Force 4.0 g
  • Output Voltage 10 mV
  • Frequency Range 20–18.000 Hz

Output voltage at 1000Hz, 5cm/sec. – 10 mV
Channel balance at 1kHz – 1 dB
Channel separation at 1kHz – 22 dB
Channel separation at 15 kHz – 15 dB
Frequency range at -3dB – 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force – 100 μm
Compliance, dynamic lateral – 14 μm/m N
Stylus type – Spherical R 18 μm
Tracking force range – 3 – 5 g
Tracking force recommended – 4 g

Cartridge weight – 18,5 g
Replacement stylus unit – DIGITAL

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON Concorde MkII DIGITAL TWIN Cartridge DJ”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON Concorde MkII DIGITAL TWIN Cartridge DJ removeORTOFON 2M Black CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON Concorde Elektro Set removeORTOFON OM Digitrack CARTRIDGE remove
NameORTOFON Concorde MkII DIGITAL TWIN Cartridge DJ removeORTOFON 2M Black CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON Concorde Elektro Set removeORTOFON OM Digitrack CARTRIDGE remove
Image
SKUMkII DIGITAL TWIN2MBlackCONCORDEDIGITRACKConcordeScratchTWINConcordeElektroSetOMDigitrack
Rating
Price235.00 incl. GR VAT599.00 incl. GR VAT116.98 incl. GR VAT204.00 incl. GR VAT129.00 incl. GR VAT67.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Concorde DIGITAL is designed to extend the life of timecode vinyl and minimize errors in decoding

• At the same time DIGITAL provides optimal output voltage and sound quality for use with conventional vinyl.
• This optimized 10 mV output voltage maximizes the signal-to-noise ratio of the audio being fed to the software, which results in better interpretation of the timecode signal. 
• Furthermore, a decrease in the reproduction of frequencies where vinyl wear & crackle occur helps to minimize errors in the interpretation of the timecode signal and helps timecoded vinyl records last longer.

Concorde DIGITAL technical data
  • Stylus Type Spherical
  • Tracking Force 4.0 g
  • Output Voltage 10 mV
  • Frequency Range 20–18.000 Hz

Output voltage at 1000Hz, 5cm/sec. - 10 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 22 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Tracking ability at 315 Hz at recommmended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Spherical R 18 μm
Tracking force range - 3 - 5 g
Tracking force recommended - 4 g

Cartridge weight - 18,5 g
Replacement stylus unit - DIGITAL

2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry. The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec.5 mV Channel balance at 1 kHz1 dB Channel separation at 1 kHz26 dB Channel separation at 15 kHz15 dB Frequency range at - 3dB20-31.000 Hz Frequency response20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force80 µm Compliance, dynamic, lateral22 µm/mN Stylus typeNude Shibata Stylus tip radiusr/R 6/50 µm Tracking force range1,4-1,7g (14-17 mN) Tracking force, recommended1,5 g (15 mN) Tracking angle20° Internal impedance, DC resistance1,2 kOhm Internal inductance630 mH Recommended load resistance47 kOhm Recommended load capacitance150-300 pF Cartridge colour, body/stylusBlack/Black Cartridge weight7,2 g Replacement stylus unit2M Black

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz -3dB/-2 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

--

Tracking force range

2,0-4,0 g (20-40 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

-

Internal impedance, DC resistance

-

Internal inductance

-

Recommended load resistance

-

Recommended load capacitance

-

Cartridge weight

18,5 g

Replacement stylus unit

Digitrak

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch

  • Features

    • 1 System
    • 1 Replacement Stylus
    • Small brush
    • Inside a velvet-case


    Technical Data

    Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
    Frequency response: 20-15.000 Hz +3 / -2 dB
    Stylus type: Spherical
    Tracking force range: 3,0-5,0 g (30-50 mN)
    Tracking force, recommended: 4,0 g (40 mN)
    Cartridge weight: 5 g

    The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

    Output voltage at 1000Hz, 5cm/sec.

    8 mV

    Channel balance at 1kHz

    1,5 dB

    Channel separation at 1kHz

    22 dB

    Channel separation at 15 kHz

    15 dB

    Frequency range at -3dB

    20-20.000 Hz

    Frequency response

    20-20.000 Hz +/- 1,5 dB

    Tracking ability at 315 Hz at recommmende tracking force

    90 μm

    Compliance, dynamic lateral

    12 μm/m N

    Stylus type

    Spherical

    Stylus tip radius

    -

    Tracking force range

    2,0-4,0 g (20-40 mN)

    Tracking force recommended

    3,0 g (30 mN)

    Tracking angle

    -

    Internal impedance, DC resistance

    -

    Internal inductance

    -

    Recommended load resistance

    -

    Recommended load capacitance

    -

    Cartridge weight

    5 g

    Replacement stylus unit

    Digitrak

     

    Weight0.30 kg0.70 kg0.18 kg0.50 kg0.30 kg0.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.30 kg
    Weight 0.70 kg
    Weight 0.18 kg
    Weight 0.50 kg
    Weight 0.30 kg
    Weight 0.50 kg