Ortofon Concorde Nightclub MKII

Discontinued

133.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  Following in the footsteps of the legendary Night Club series, the re-engineered Night Club MKII boasts numerous sonic improvements in both club and studio settings.  With a new cartridge body, the Night Club MKII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found […]

 

Read more

 

Following in the footsteps of the legendary Night Club series, the re-engineered Night Club MKII boasts numerous sonic improvements in both club and studio settings.  With a new cartridge body, the Night Club MKII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers).  The redesigned elliptical stylus provides well-balanced high frequency response and ample low end reproduction.  The Night Club MKII marks a new generation of club cartridges, designed to surpass the gold standard set by the original Night Club cartridge.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

23 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-22.000 Hz

Frequency response

20-20.000 Hz +/- 1,5 dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

7 μm/m N

Stylus type

Special Elliptical

Stylus tip radius

r/R 13/25 μm

Tracking force range

2,0-5,0 g (20-50 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.000 Ohm

Internal inductance

580 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Nightclub E MKII

 

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “Ortofon Concorde Nightclub MKII”

Your email address will not be published. Required fields are marked *

Quick Comparison

Ortofon Concorde Nightclub MKII removeOrtofon 2M RED CARTRIDGE removeORTOFON OM 5E CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON 2M Black CARTRIDGE remove
NameOrtofon Concorde Nightclub MKII removeOrtofon 2M RED CARTRIDGE removeORTOFON OM 5E CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON 2M Black CARTRIDGE remove
Image
SKUconcnight2MREDOM5EOMQ.Bert2MBRONZE2MBlack
Rating
Price133.00 incl. GR VAT 105.40 incl. GR VAT 74.34 incl. GR VAT69.01 incl. GR VAT345.00 incl. GR VAT599.00 incl. GR VAT
Stock

Out of stock

Only 2 left in stock (can be backordered)

Only 2 left in stock (can be backordered)

In stock

In stock

Available on backorder

AvailabilityOut of stockOnly 2 left in stock (can be backordered)Only 2 left in stock (can be backordered)In stockIn stockAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 

Following in the footsteps of the legendary Night Club series, the re-engineered Night Club MKII boasts numerous sonic improvements in both club and studio settings.  With a new cartridge body, the Night Club MKII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers).  The redesigned elliptical stylus provides well-balanced high frequency response and ample low end reproduction.  The Night Club MKII marks a new generation of club cartridges, designed to surpass the gold standard set by the original Night Club cartridge.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

23 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-22.000 Hz

Frequency response

20-20.000 Hz +/- 1,5 dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

7 μm/m N

Stylus type

Special Elliptical

Stylus tip radius

r/R 13/25 μm

Tracking force range

2,0-5,0 g (20-50 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.000 Ohm

Internal inductance

580 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Nightclub E MKII

 

The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. Of course the 2M isnʼt just another pretty face. It has been engineered to the highest standards and is congruent with Ortofonʼs unrelenting commitment to providing the most precise and accurate reproduction possible without coloration. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series.  The 2M Red uses an improved engine, which provides an increased output of 5.5mV. 2M red features a tipped elliptical diamond.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
Channel balance at 1 kHz  1,5 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-22.000 Hz
Frequency response 20-20.000 Hz + 3 / - 1 dB
Tracking ability at 315Hz at recommended tracking force 70 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,6-2,0g (16-20 mN)
Tracking force, recommended 1,8 g (18 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,3 kOhm
Internal inductance 700 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Red
Cartridge weight 7,2 g
Replacement stylus unit 2M Red
The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 4 mV
Channel balance at 1 kHz 2 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 5 g
Replacement stylus unit Stylus 5 E
*) Typical value

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

 

 

Output voltage at 1000Hz, 5cm/sec.

11 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

-

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz - 3 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0 g (30 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-400 pF

Cartridge weight

5 g

Replacement stylus unit

Q.Bert

 

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze
2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry. The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec.5 mV Channel balance at 1 kHz1 dB Channel separation at 1 kHz26 dB Channel separation at 15 kHz15 dB Frequency range at - 3dB20-31.000 Hz Frequency response20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force80 µm Compliance, dynamic, lateral22 µm/mN Stylus typeNude Shibata Stylus tip radiusr/R 6/50 µm Tracking force range1,4-1,7g (14-17 mN) Tracking force, recommended1,5 g (15 mN) Tracking angle20° Internal impedance, DC resistance1,2 kOhm Internal inductance630 mH Recommended load resistance47 kOhm Recommended load capacitance150-300 pF Cartridge colour, body/stylusBlack/Black Cartridge weight7,2 g Replacement stylus unit2M Black
Weight0.30 kg0.70 kg0.05 kg0.50 kg0.70 kg0.70 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.70 kg
Weight 0.05 kg
Weight 0.50 kg
Weight 0.70 kg
Weight 0.70 kg