| Content |
Following in the footsteps of the legendary Night Club series, the re-engineered Night Club MKII boasts numerous sonic improvements in both club and studio settings. With a new cartridge body, the Night Club MKII offers increased output voltage for powerful, energetic sound and enhanced performance from integrated phono preamps such as the ones found in DJ mixers). The redesigned elliptical stylus provides well-balanced high frequency response and ample low end reproduction. The Night Club MKII marks a new generation of club cartridges, designed to surpass the gold standard set by the original Night Club cartridge.
|
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
23 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-22.000 Hz
| |
Frequency response
|
20-20.000 Hz +/- 1,5 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
80 μm
| |
Compliance, dynamic lateral
|
7 μm/m N
| |
Stylus type
|
Special Elliptical
| |
Stylus tip radius
|
r/R 13/25 μm
| |
Tracking force range
|
2,0-5,0 g (20-50 mN)
| |
Tracking force recommended
|
3,0 g (30 mN)
| |
Tracking angle
|
20°
| |
Internal impedance, DC resistance
|
1.000 Ohm
| |
Internal inductance
|
580 mH
| |
Recommended load resistance
|
47 kOhm
| |
Recommended load capacitance
|
200-600 pF
| |
Cartridge weight
|
18,5 g
| |
Replacement stylus unit
|
Nightclub E MKII
|
|
The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM). With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well. DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.
|
Output voltage at 1000Hz, 5cm/sec.
|
8 mV
| |
Channel balance at 1kHz
|
1,5 dB
| |
Channel separation at 1kHz
|
22 dB
| |
Channel separation at 15 kHz
|
15 dB
| |
Frequency range at -3dB
|
20-20.000 Hz
| |
Frequency response
|
20-18.000 Hz -3dB/-2 dB
| |
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
| |
Compliance, dynamic lateral
|
12 μm/m N
| |
Stylus type
|
Spherical
| |
Stylus tip radius
|
--
| |
Tracking force range
|
2,0-4,0 g (20-40 mN)
| |
Tracking force recommended
|
3,0 g (30 mN)
| |
Tracking angle
|
-
| |
Internal impedance, DC resistance
|
-
| |
Internal inductance
|
-
| |
Recommended load resistance
|
-
| |
Recommended load capacitance
| - | |
Cartridge weight
| 18,5 g
| |
Replacement stylus unit
| Digitrak |
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip | The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 22 dB |
| Channel separation at 15 kHz |
> 15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 65 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
|
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
| The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge. Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.
| TECHNICAL DATA |
|
| Output voltage at 1000 Hz, 5cm/sec. |
5,5 mV |
| Channel balance at 1 kHz |
1,5 dB |
| Channel separation at 1 kHz |
25 dB |
| Channel separation at 15 kHz |
15 dB |
| Frequency range at - 3dB |
20-25.000 Hz |
| Frequency response |
20-20.000 + 2 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force |
80 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Nude Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Tracking force range |
1,6-2,0g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
1,3 kOhm |
| Internal inductance |
700 mH |
| Recommended load resistance |
47 kOhm |
| Recommended load capacitance |
150-300 pF |
| Cartridge colour, body/stylus |
Black/Blue |
| Cartridge weight |
7,2 g |
| Replacement stylus unit |
2M Blue |
|
Reviews
There are no reviews yet.