Ortofon Concorde Pro S CARTRIDGE

Discontinued

77.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  The Pro-S retains the overall sonic properties of the Pro Silver, but provides a wider stylus for low wear as well as durability under demanding conditions.  No matter what the application, the Pro-S provides remarkable versatility for virtually any setting. Output voltage at 1000Hz, 5cm/sec. 5 mV Channel balance at 1kHz 2 dB Channel […]

 

Read more

 

The Pro-S retains the overall sonic properties of the Pro Silver, but provides a wider stylus for low wear as well as durability under demanding conditions.  No matter what the application, the Pro-S provides remarkable versatility for virtually any setting.

Output voltage at 1000Hz, 5cm/sec.

5 mV

Channel balance at 1kHz

2 dB

Channel separation at 1kHz

20 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz +/- 2 dB

Tracking ability at 315 Hz at recommmende tracking force

70 μm

Compliance, dynamic lateral

7 μm/m N

Stylus type

Spherical

Stylus tip radius

R 26 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Pro S

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “Ortofon Concorde Pro S CARTRIDGE”

Your email address will not be published. Required fields are marked *

Quick Comparison

Ortofon Concorde Pro S CARTRIDGE removeNUMARK Groove Tool PROFESSIONAL DJ CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON 2M Black CARTRIDGE removeORTOFON OM S-120 Set Head with needle remove
NameOrtofon Concorde Pro S CARTRIDGE removeNUMARK Groove Tool PROFESSIONAL DJ CARTRIDGE removeORTOFON CONCORDE DIGITRACK CARTRIDGE removeORTOFON 2M Bronze Cartridge removeORTOFON 2M Black CARTRIDGE removeORTOFON OM S-120 Set Head with needle remove
Image
SKUconcprosH99NU00004CONCORDEDIGITRACK2MBRONZE2MBlackOM S-120 Set
Rating
Price77.00 incl. GR VAT 24.80 incl. GR VAT116.98 incl. GR VAT345.00 incl. GR VAT599.00 incl. GR VAT102.98 incl. GR VAT
Stock

Out of stock

Only 1 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock

AvailabilityOut of stockOnly 1 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 

The Pro-S retains the overall sonic properties of the Pro Silver, but provides a wider stylus for low wear as well as durability under demanding conditions.  No matter what the application, the Pro-S provides remarkable versatility for virtually any setting.

Output voltage at 1000Hz, 5cm/sec.

5 mV

Channel balance at 1kHz

2 dB

Channel separation at 1kHz

20 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz +/- 2 dB

Tracking ability at 315 Hz at recommmende tracking force

70 μm

Compliance, dynamic lateral

7 μm/m N

Stylus type

Spherical

Stylus tip radius

R 26 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Pro S




 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT * Adjustable cartridge which will fit in a traditional headshell mount * Replaceable diamond tip

The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

 

Output voltage at 1000Hz, 5cm/sec.

8 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-18.000 Hz -3dB/-2 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

--

Tracking force range

2,0-4,0 g (20-40 mN)

Tracking force recommended

3,0 g (30 mN)

Tracking angle

-

Internal impedance, DC resistance

-

Internal inductance

-

Recommended load resistance

-

Recommended load capacitance

-

Cartridge weight

18,5 g

Replacement stylus unit

Digitrak

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze
2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry. The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec.5 mV Channel balance at 1 kHz1 dB Channel separation at 1 kHz26 dB Channel separation at 15 kHz15 dB Frequency range at - 3dB20-31.000 Hz Frequency response20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force80 µm Compliance, dynamic, lateral22 µm/mN Stylus typeNude Shibata Stylus tip radiusr/R 6/50 µm Tracking force range1,4-1,7g (14-17 mN) Tracking force, recommended1,5 g (15 mN) Tracking angle20° Internal impedance, DC resistance1,2 kOhm Internal inductance630 mH Recommended load resistance47 kOhm Recommended load capacitance150-300 pF Cartridge colour, body/stylusBlack/Black Cartridge weight7,2 g Replacement stylus unit2M Black

A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!

The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.

An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. 

Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. 

In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.

Output voltage at 1000Hz, 5cm/sec. 

10 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

20 dB

Channel separation at 15 kHz 

15 dB

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz +3/- 2dB

FIM distortion at recommended tracking force DIN 45.542

Tracking ability at 315 Hz at recommended tracking force  

120 μm

Compliance, dynamic lateral 

11 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

1,5-10,0 g (15-100 mN)

Tracking force recommended

4,0 g (40 mN)

Internal impedance, DC resistance

1680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

5 g

Replacement stylus unit

Ortofon-Serato S-120

 

Weight0.30 kg0.18 kg0.18 kg0.70 kg0.70 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.30 kg
Weight 0.18 kg
Weight 0.18 kg
Weight 0.70 kg
Weight 0.70 kg
Weight 0.10 kg