| Content |
Concorde DJ S - basic model for scratch and back-cueing
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favoured choice of DJs around the world!
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommended tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Replacement stylus unit - DJ S, DJ E
| 2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry.
The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec.5 mV
Channel balance at 1 kHz1 dB
Channel separation at 1 kHz26 dB
Channel separation at 15 kHz15 dB
Frequency range at - 3dB20-31.000 Hz
Frequency response20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force80 µm
Compliance, dynamic, lateral22 µm/mN
Stylus typeNude Shibata
Stylus tip radiusr/R 6/50 µm
Tracking force range1,4-1,7g (14-17 mN)
Tracking force, recommended1,5 g (15 mN)
Tracking angle20°
Internal impedance, DC resistance1,2 kOhm
Internal inductance630 mH
Recommended load resistance47 kOhm
Recommended load capacitance150-300 pF
Cartridge colour, body/stylusBlack/Black
Cartridge weight7,2 g
Replacement stylus unit2M Black |
Ortofon D 25 M Mono Cartridge Spherical Diamond
OM D 25 M Technical Data:
Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
Channel balance at 1 kHz
Channel separation at 1 kHz
Channel separation at 15 kHz
Frequency range: 20-20.000 Hz
Frequency response: 20-18.000 Hz +3 / - 2 dB
FIM distortion at recommended tracking force, DIN 45.542:
Tracking ability at 315Hz at recommended tracking force: > 70 µm
Compliance, dynamic, lateral: 7 µm / mN
Stylus type: Spherical
Stylus tip radius: R 25 µm
Equivalent stylus tip mass: 0,5 mg
Tracking force range: 2,0-3,0 g (20-30 mN)
Tracking force, recommended: 2,5 g (25 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge colour, body/stylus: Black/Black
Cartridge weight: 5 g
Replacement stylus unit: Stylus D 25 M
|
|
Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.
ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI
Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.
With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.
Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.
TECHNICAL DATA CONCORDE DIGITRACK
Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack | The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.
| Technical data |
|
| Output voltage at 1000 Hz, 5cm/sec. |
3,3 mV |
| Channel balance at 1 kHz |
|
| Channel separation at 1 kHz |
> 24 dB |
| Channel separation at 15 kHz |
>15 dB |
| Frequency range at - 3dB |
20-30.000 Hz |
| Frequency response FIM distortion at recommended |
20-20.000 Hz + 4 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
> 70 µm |
| Compliance, dynamic, lateral |
13 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,8-2,2 g (18-22 mN) |
| Tracking force, recommended |
2 g (20 mN) |
| Tracking angle |
20° |
| Internal impedance, DC resistance |
100 Ohm |
| Recommended load impedance |
47 kOhm / |
| Cartridge body material |
Noryl |
| Cartridge colour |
Black |
| Cartridge weight |
4,1 g |
| EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT
* Adjustable cartridge which will fit in a traditional headshell mount
* Replaceable diamond tip |
Reviews
There are no reviews yet.