ORTOFON CONCORDE DJ S TWIN

Discontinued

186.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
DJ`s all over the world claim very high demands to their professional equipment, among which the cartridges “plays` their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in […]

 

Read more

DJ`s all over the world claim very high demands to their professional equipment, among which the cartridges “plays` their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration.

Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.

The OrtofonPro cartridges were the first to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use.

Features

  • Output voltage at 1000 Hz, 5cm/sec. – 6 mV
  • Channel balance at 1 kHz – 2 dB
  • Channel separation at 1 kHz – 23 dB
  • Channel separation at 15 kHz – 15 dB
  • Frequency range – 20-20.000 Hz
  • Frequency response – 20-18.000 Hz + 3 / – 2 dB
  • FIM distortion at recommended – tracking force, DIN 45.542 –
  • Stylus type – Spherical
  • Equivalent stylus tip mass – 0,6 mg
  • Tracking force range – 2,0-4,0 g (20-40 mN)
  • Tracking force, recommended – 3,0 g (30 mN)
  • Internal impedance, DC resistance – 750 Ohm
  • Internal inductance – 450 mH
  • Recommended load resistance – 47 kOhm
  • Recommended load capacitance – 200-600 pF
  • Cartridge colour, body/stylus – Blue/Blue
  • Cartridge weight – 5 g
  • Weight 0.30 kg

    Reviews

    There are no reviews yet.

    Be the first to review “ORTOFON CONCORDE DJ S TWIN”

    Your email address will not be published. Required fields are marked *

    Quick Comparison

    ORTOFON CONCORDE DJ S TWIN removeORTOFON 2M Bronze Cartridge removeSHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON OM Digitrack CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE remove
    NameORTOFON CONCORDE DJ S TWIN removeORTOFON 2M Bronze Cartridge removeSHURE M44-7DJ Scratch Spherical turntable head/needle system removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON OM Digitrack CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE remove
    Image
    SKUDJSTWIN2MBRONZEM447MC1TurboOMDigitrackConcordeScratchTWIN
    Rating
    Price186.00 incl. GR VAT345.00 incl. GR VAT372.00 incl. GR VAT199.00 incl. GR VAT67.00 incl. GR VAT204.00 incl. GR VAT
    Stock

    Out of stock

    In stock

    Only 2 left in stock

    In stock

    In stock

    In stock

    AvailabilityOut of stockIn stockOnly 2 left in stockIn stockIn stockIn stock
    Add to cart

    Read more

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Add to cart

    Description
    Content

    DJ`s all over the world claim very high demands to their professional equipment, among which the cartridges ``plays` their decisive part by realising the scratching, back-cueing, and live artistic performance, as a big part of the show. Reliability and robustness is vital, when the cartridges night after night will have to withstand these demands in environments with extreme soundpressure and vibration.

    Scratching and back-cueing impose heavy mechanical stress on the cantilever and its rubber bearing. Therefore, the Ortofon disco cartridges are equipped with cantilevers made from aluminium tube with increased wall thickness. Special attention has also been paid to the attachment of the bearing and the design of the bearing itself. This means that rough treatment will neither damage the cartridge nor degrade its stability.

    The OrtofonPro cartridges were the first to combine the unrivalled Ortofon sound quality with the ruggedness that is a must for professional use.

    Features

  • Output voltage at 1000 Hz, 5cm/sec. - 6 mV
  • Channel balance at 1 kHz - 2 dB
  • Channel separation at 1 kHz - 23 dB
  • Channel separation at 15 kHz - 15 dB
  • Frequency range - 20-20.000 Hz
  • Frequency response - 20-18.000 Hz + 3 / - 2 dB
  • FIM distortion at recommended - tracking force, DIN 45.542 -
  • Stylus type - Spherical
  • Equivalent stylus tip mass - 0,6 mg
  • Tracking force range - 2,0-4,0 g (20-40 mN)
  • Tracking force, recommended - 3,0 g (30 mN)
  • Internal impedance, DC resistance - 750 Ohm
  • Internal inductance - 450 mH
  • Recommended load resistance - 47 kOhm
  • Recommended load capacitance - 200-600 pF
  • Cartridge colour, body/stylus - Blue/Blue
  • Cartridge weight - 5 g
  • 2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

    2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

    The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

    The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

    The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


    TECHNICAL DATA
    Output voltage at 1000 Hz, 5cm/sec. 5 mV
    Channel balance at 1 kHz 1 dB
    Channel separation at 1 kHz 26 dB
    Channel separation at 15 kHz 15 dB
    Frequency range at - 3dB 20-29.000 Hz
    Frequency response 20-20.000 + 2 / - 0 dB
    Tracking ability at 315Hz at recommended tracking force 80 µm
    Compliance, dynamic, lateral 22 µm/mN
    Stylus type Nude Fine Line
    Stylus tip radius r/R 8/40 µm
    Tracking force range 1,4-1,7g (14-17 mN)
    Tracking force, recommended 1,5 g (15 mN)
    Tracking angle 20°
    Internal impedance, DC resistance 1,2 kOhm
    Internal inductance 630 mH
    Recommended load resistance 47 kOhm
    Recommended load capacitance 150-300 pF
    Cartridge colour, body/stylus Black/Bronze
    Cartridge weight  7,2 g
    Replacement stylus unit 2M Bronze
    M44-7 Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide.  Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
    • Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
    • With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
    • Skip Resistance: ultra high
    • Output: ultra high
    • Record Wear: ultra low
    • Sound Emphasis: big bass
      Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z Made In Mexico

    The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.

    Technical data  
    Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
    Channel balance at 1 kHz
    Channel separation at 1 kHz > 22 dB
    Channel separation at 15 kHz > 15 dB
    Frequency range at - 3dB 20-25.000 Hz
    Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
    Tracking ability at 315Hz at recommended tracking force *) > 65 µm
    Compliance, dynamic, lateral 13 µm/mN
    Stylus type Elliptical
    Stylus tip radius r/R 8/18 µm
    Tracking force range 1,8-2,2 g (18-22 mN)
    Tracking force, recommended 2 g (20 mN)
    Tracking angle 20°
    Internal impedance, DC resistance 100 Ohm
    Recommended load impedance 47 kOhm /
    Cartridge body material Noryl
    Cartridge colour Black
    Cartridge weight 4,1 g

    The newest cartridge from Ortofon, the DigiTrack responds to the next generation of turntable DJs who make extensive use of timecoded vinyl applications, such as Serato (TM) and FinalScratch (TM).  With DigiTrack's low wear design and tailored frequency response increase the lifespan of timecoded vinyl records, and provides high quality sound reproduction for playing conventional vinyl records as well.   DigiTrack also features excellent groove-handling capabilities for scratch and mix performance, as well as increased output voltage for improved TCV performance and better sound quality from your mixer's phono preamps.

    Output voltage at 1000Hz, 5cm/sec.

    8 mV

    Channel balance at 1kHz

    1,5 dB

    Channel separation at 1kHz

    22 dB

    Channel separation at 15 kHz

    15 dB

    Frequency range at -3dB

    20-20.000 Hz

    Frequency response

    20-20.000 Hz +/- 1,5 dB

    Tracking ability at 315 Hz at recommmende tracking force

    90 μm

    Compliance, dynamic lateral

    12 μm/m N

    Stylus type

    Spherical

    Stylus tip radius

    -

    Tracking force range

    2,0-4,0 g (20-40 mN)

    Tracking force recommended

    3,0 g (30 mN)

    Tracking angle

    -

    Internal impedance, DC resistance

    -

    Internal inductance

    -

    Recommended load resistance

    -

    Recommended load capacitance

    -

    Cartridge weight

    5 g

    Replacement stylus unit

    Digitrak

     

    For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


    This Ortofon Concorde Set contains;
    - 2x Ortofon Concorde Scratch Element
    - Ortofon Needle Brush
    - All parts come in a special Ortofon box casing

    Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch

  • Weight0.30 kg0.70 kg0.5 kg0.40 kg0.50 kg0.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.30 kg
    Weight 0.70 kg
    Weight 0.5 kg
    Weight 0.40 kg
    Weight 0.50 kg
    Weight 0.50 kg