Content |
2M Mono features:
- an improved engine, which provides a high level of sonic accuracy
- R 18µm Nude Spherical stylus that is an optimal solution for playing mono microgroove LP vinyl records
- 2M Mono uses a strapped output to deliver the same output signal from both sets of pole pins. This effectively eliminates the need for mono-specific equipment, making it possible to enjoy true mono reproduction on any stereo playback system.
2M Mono Technical data
Output voltage at 1000 Hz, 5cm/sec. - 4 mV Channel balance at 1 kHz - Channel separation at 1 kHz - Channel separation at 15 kHz - Frequency range at - 3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force - 70 µm Compliance, dynamic, lateral - 18 µm/mN Stylus type - Nude Spherical Stylus tip radius - R18 µm Tracking force range - 1,6-2,0g (16-20 mN) Tracking force, recommended - 1,8 g (18 mN) Tracking angle - 20°
Internal impedance, DC resistance - 700 Ohm Internal inductance - 350 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 150-300 pF Cartridge colour, body/stylus - Black/White Cartridge weight without screws - 7,2 g 2M PnP MkII cartridge with integrated headshell weight - 20 g 2M PnP MkII cartridge with integrated headshell length - 52 mm Replacement stylus unit - 2M Mono (interchangeable with 2M 78) | The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA |
|
Output voltage at 1000 Hz, 5cm/sec. |
4 mV |
Channel balance at 1 kHz |
2 dB |
Channel separation at 1 kHz |
22 dB |
Channel separation at 15 kHz |
15 dB |
Frequency range at - 3dB |
20-25.000 Hz |
Frequency response |
20-20.000 Hz ± 2 dB |
Tracking ability at 315Hz at recommended tracking force *) |
65 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
750 Ohm |
Internal inductance |
450 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-600 pF |
Cartridge colour, body/stylus |
Black/Black |
Cartridge weight |
5 g |
Replacement stylus unit |
Stylus 5 E |
|
2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.
2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.
The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications. The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners. Additionally, its larger footprint ensures reduced distortion and record wear.
The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.
TECHNICAL DATA |
| Output voltage at 1000 Hz, 5cm/sec. | 5 mV | Channel balance at 1 kHz | 1 dB | Channel separation at 1 kHz | 26 dB | Channel separation at 15 kHz | 15 dB | Frequency range at - 3dB | 20-29.000 Hz | Frequency response | 20-20.000 + 2 / - 0 dB | Tracking ability at 315Hz at recommended tracking force | 80 µm | Compliance, dynamic, lateral | 22 µm/mN | Stylus type | Nude Fine Line | Stylus tip radius | r/R 8/40 µm | Tracking force range | 1,4-1,7g (14-17 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Internal impedance, DC resistance | 1,2 kOhm | Internal inductance | 630 mH | Recommended load resistance | 47 kOhm | Recommended load capacitance | 150-300 pF | Cartridge colour, body/stylus | Black/Bronze | Cartridge weight | 7,2 g | Replacement stylus unit | 2M Bronze | | A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
|
Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec.
|
11 mV
|
Channel balance at 1kHz
|
1,5 dB
|
Channel separation at 1kHz
|
22 dB
|
Channel separation at 15 kHz
| -
|
Frequency range at -3dB
|
20-18.000 Hz
|
Frequency response
|
20-18.000 Hz - 3 dB
|
Tracking ability at 315 Hz at recommmende tracking force
|
90 μm
|
Compliance, dynamic lateral
|
12 μm/m N
|
Stylus type
|
Spherical
|
Stylus tip radius
|
R 18 μm
|
Tracking force range
|
3,0 g (30 mN)
|
Tracking force recommended
|
4,0 g (40 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1.680 Ohm
|
Internal inductance
|
920 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge weight
|
5 g
|
Replacement stylus unit
| Q.Bert |
| M44-7
Revived exactly the same as the original, this legendary battle needle offers ultra-high skip resistance and ultra-high output. The needle of choice for many champion DJ's worldwide. Engineered for scratch DJ's and turntablists, the M44-7 is designed not to skip under even the most demanding circumstances.
- Combining the Shure unique wide-diameter Type S cantilever with a tracking force of 1.5 to 3.0 grams, the M44-7's rugged construction is highly durable, but will not unduly wear your vinyl.
- With a 9.5 mV output, the M44-7 produces powerful, resonant sound.
- Skip Resistance: ultra high
- Output: ultra high
- Record Wear: ultra low
- Sound Emphasis: big bass
Tone Arm MountStandard 1/2 inch Cartridge TypeMoving Magnet Output VoltageTypical at 1 kHz9.5 mV RMS at 5 cm/sec peak velocity Recommended Load47 kilohms in parallel with 450pf Tracking ForceEffective at stylus tipRange: 1.5 to 3 grams Stylus CantileverShure Type SHeat-treated aluminum alloy / tubular1.6 mil wall thickness / 34.5 mil diameter Diamond Stylus TipPolished natural gemstone: SphericalRadius: 0.7 mil Frequency ResponseEssentially flat from 20 to 20,000 Hz
Stereo Channel BalanceWithin 2 dB Channel SeparationTypical at 1 kHz: 20 dB Net Weight6.7 grams Height15.9 mm Accessories IncludedAttached flip-down Stylus GuardHeadshell Screwdriver (Phillips)Extra Set of 4 Headshell Wires (4-99)Stylus Cleaning BrushHeadshell Weight (3 grams)User GuideMounting hardwareStylus guard Replacement NeedlesSingle with box & User Guide N44-74 Pack mounted on a card N44-7Q12 Pack mounted on a card N44-7Z
Made In Mexico |
Reviews
There are no reviews yet.