ORTOFON OM PRO S CARTRIDGE

49.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
A budget cartridge that out performs a lot of other top-of-the-line models. No need to go broke to get an affordable, tough-as-nails scratching tool. Technical Data: Output voltage at 1000 Hz, 5cm/sec: 5 mV Channel balance at 1 kHz: 2 dB Channel separation at 1 kHz: 20 dB Channel separation at 15 kHz: 15 dB […]

 

Read more

A budget cartridge that out performs a lot of other top-of-the-line models.

No need to go broke to get an affordable, tough-as-nails scratching tool.

Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at – 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / – 2 dB
  • FIM distortion at recommended
    tracking force, DIN 45.542:
  • Tracking ability at 315Hz at
    recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON OM PRO S CARTRIDGE”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON OM PRO S CARTRIDGE removeORTOFON Concorde Scratch CARTRIDGE removeORTOFON 2M Black CARTRIDGE removeORTOFON MC 3 Turbo CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeORTOFON OM 5E CARTRIDGE remove
NameORTOFON OM PRO S CARTRIDGE removeORTOFON Concorde Scratch CARTRIDGE removeORTOFON 2M Black CARTRIDGE removeORTOFON MC 3 Turbo CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin removeORTOFON OM 5E CARTRIDGE remove
Image
SKUOMPROSConcordeScratch2MBlackMC3TurboCONCORDE DIGITRACKTwinOM5E
Rating
Price49.00 incl. GR VAT102.00 incl. GR VAT599.00 incl. GR VAT349.00 incl. GR VAT223.00 incl. GR VAT 74.34 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

Available on backorder

In stock

In stock

Only 2 left in stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)In stockAvailable on backorderIn stockIn stockOnly 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentA budget cartridge that out performs a lot of other top-of-the-line models. No need to go broke to get an affordable, tough-as-nails scratching tool. Technical Data:
  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at - 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / - 2 dB
  • FIM distortion at recommended tracking force, DIN 45.542:
  • Tracking ability at 315Hz at recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Output voltage at 1000Hz, 5cm/sec.

7 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

25 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-15.000 Hz 3dB/-2dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

6 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Scratch

 

2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry. The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. TECHNICAL DATA Output voltage at 1000 Hz, 5cm/sec.5 mV Channel balance at 1 kHz1 dB Channel separation at 1 kHz26 dB Channel separation at 15 kHz15 dB Frequency range at - 3dB20-31.000 Hz Frequency response20-20.000 + 2 / - 0 dB Tracking ability at 315Hz at recommended tracking force80 µm Compliance, dynamic, lateral22 µm/mN Stylus typeNude Shibata Stylus tip radiusr/R 6/50 µm Tracking force range1,4-1,7g (14-17 mN) Tracking force, recommended1,5 g (15 mN) Tracking angle20° Internal impedance, DC resistance1,2 kOhm Internal inductance630 mH Recommended load resistance47 kOhm Recommended load capacitance150-300 pF Cartridge colour, body/stylusBlack/Black Cartridge weight7,2 g Replacement stylus unit2M Black

The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond.  The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models.  The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.


Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 24 dB
Channel separation at 15 kHz >15 dB
Frequency range at - 3dB 20-30.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 70 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

TECHNICAL DATA CONCORDE DIGITRACK

Output voltage at 1000 Hz,
5cm/sec.
8 mV
Channel balance at 1 kHz
1,5 dB
Channel separation at 1 kHz
22 dB
Channel separation at 15 kHz
15 dB
Frequency range
20-20.000 Hz
Frequency response
20-18.000 Hz -3 /- 2dB
FIM distortion at recommended tracking force,
DIN 45.542
< 1%
Tracking ability at 315Hz at
recommended tracking force
80 m
Compliance, dynamic, lateral
12 m/mN
Stylus type
Spherical
Stylus tip radius
R18
Equivalent stylus tip mass
0,6 mg
Tracking force range
2-4 g (20-40 mN)
Tracking force, recommended
3,0 g (30 mN)
Tracking angle
20
Internal impedance, DC resistance
1325 Ohm
Internal inductance
765 mH
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Cartridge colour, body/stylus
Red/Red
Cartridge weight
18,5 g
Replacement stylus unit
Digitrack

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.
TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 4 mV
Channel balance at 1 kHz 2 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 5 g
Replacement stylus unit Stylus 5 E
*) Typical value
Weight0.50 kg0.18 kg0.70 kg0.40 kg0.50 kg0.05 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.18 kg
Weight 0.70 kg
Weight 0.40 kg
Weight 0.50 kg
Weight 0.05 kg