ORTOFON OM PRO S CARTRIDGE

49.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
A budget cartridge that out performs a lot of other top-of-the-line models. No need to go broke to get an affordable, tough-as-nails scratching tool. Technical Data: Output voltage at 1000 Hz, 5cm/sec: 5 mV Channel balance at 1 kHz: 2 dB Channel separation at 1 kHz: 20 dB Channel separation at 15 kHz: 15 dB […]

 

Read more

A budget cartridge that out performs a lot of other top-of-the-line models.

No need to go broke to get an affordable, tough-as-nails scratching tool.

Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at – 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / – 2 dB
  • FIM distortion at recommended
    tracking force, DIN 45.542:
  • Tracking ability at 315Hz at
    recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S
Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON OM PRO S CARTRIDGE”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON OM PRO S CARTRIDGE removeNUMARK Groove Tool PROFESSIONAL DJ CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin remove
NameORTOFON OM PRO S CARTRIDGE removeNUMARK Groove Tool PROFESSIONAL DJ CARTRIDGE removeORTOFON OM Q.Bert CARTRIDGE removeORTOFON MC 1 Turbo CARTRIDGE removeORTOFON Concorde Scratch TWIN CARTRIDGE removeORTOFON CONCORDE DIGITRACK Twin remove
Image
SKUOMPROSH99NU00004OMQ.BertMC1TurboConcordeScratchTWINCONCORDE DIGITRACKTwin
Rating
Price49.00 incl. GR VAT 24.80 incl. GR VAT69.00 incl. GR VAT199.00 incl. GR VAT204.00 incl. GR VAT223.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

In stock

AvailabilityOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentA budget cartridge that out performs a lot of other top-of-the-line models. No need to go broke to get an affordable, tough-as-nails scratching tool. Technical Data:
  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at - 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / - 2 dB
  • FIM distortion at recommended tracking force, DIN 45.542:
  • Tracking ability at 315Hz at recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S
EVERYTHING YOU NEED IN A CARTRIDGE, NOTHING YOU DONʼT * Adjustable cartridge which will fit in a traditional headshell mount * Replaceable diamond tip

Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics.  The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.

 

 

Output voltage at 1000Hz, 5cm/sec.

11 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

22 dB

Channel separation at 15 kHz

-

Frequency range at -3dB

20-18.000 Hz

Frequency response

20-18.000 Hz - 3 dB

Tracking ability at 315 Hz at recommmende tracking force

90 μm

Compliance, dynamic lateral

12 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0 g (30 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

1.680 Ohm

Internal inductance

920 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-400 pF

Cartridge weight

5 g

Replacement stylus unit

Q.Bert

 

The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.

Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 22 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 65 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.


This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch

  • Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

    ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

    Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

    With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

    Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

    TECHNICAL DATA CONCORDE DIGITRACK

    Output voltage at 1000 Hz,
    5cm/sec.
    8 mV
    Channel balance at 1 kHz
    1,5 dB
    Channel separation at 1 kHz
    22 dB
    Channel separation at 15 kHz
    15 dB
    Frequency range
    20-20.000 Hz
    Frequency response
    20-18.000 Hz -3 /- 2dB
    FIM distortion at recommended tracking force,
    DIN 45.542
    < 1%
    Tracking ability at 315Hz at
    recommended tracking force
    80 m
    Compliance, dynamic, lateral
    12 m/mN
    Stylus type
    Spherical
    Stylus tip radius
    R18
    Equivalent stylus tip mass
    0,6 mg
    Tracking force range
    2-4 g (20-40 mN)
    Tracking force, recommended
    3,0 g (30 mN)
    Tracking angle
    20
    Internal impedance, DC resistance
    1325 Ohm
    Internal inductance
    765 mH
    Recommended load resistance
    47 kOhm
    Recommended load capacitance
    200-600 pF
    Cartridge colour, body/stylus
    Red/Red
    Cartridge weight
    18,5 g
    Replacement stylus unit
    Digitrack

    Weight0.50 kg0.18 kg0.50 kg0.40 kg0.50 kg0.50 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.50 kg
    Weight 0.18 kg
    Weight 0.50 kg
    Weight 0.40 kg
    Weight 0.50 kg
    Weight 0.50 kg