| Content | ORTOFON TA-110 TONEARM
The TA-110 is a product with great benefits for the discerning analogue user.
FEATURES
• TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-110 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/Outer scale
- Inner scale to be applied with main counterweight
- Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring for heavier cartridge and headshell combinations included. The extra mass ring may need to be attached to achieve proper tracking force
TECHNICAL DATA:
• Effective mass without headshell 3.5 g
• Mass of supplied headshell 15.5 g
• Effective armlength (distance between the stylus and pivot point): 231.0 mm
• Mounting distance (distance between the pivot point and turntable center): 213.0 mm
• Offset angle: 23.9 degrees
• Overhang: 18.0 mm
• Tracking force adjusting range (direct reading): 0-3 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28 g included
• Headshell LH-2000E, weight: 15.5 g, included
• TA-110 total weight including headshell: 470 g
• Set of tonearm cables 6NX-TSW-1010 included
• Extra mass ring, weight 45 g, for heavier cartridges included | Cardan bearing with zero-mass tracking force setting by a
high-precision torsion spring.
Removable headshell with 1/2 inch fixing holes. Adjustable
tracking force and anti-skating.
Headshell made of carbon fiber for special rigid torsion.
Chassis technology
Solid wooden console. Floating sub-chassis.Vibration
-damped aluminum turntables with anti-static felt mat.
Drive technology
Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone
arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back
archived discs with a rotational speed of 78 Upm.
Delivered with magnetic pick-up OMB 10. |
Features
- NEW features of the MK2 version:
- Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
- More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
- Fine-tuned motor control for further optimization of wow and flutter and rotation
- Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
- Particularly light weight and rigid, satin aluminium material used for tone arm
- Adjustable Pitch scale for precise adjustments
- Optional ground terminal offers additional protection in complex club & studio environments
- Easily replaceable, freely rotatable LED needle light in new aluminium design
- High-quality and hard-wearing deep black, metallic finish
- Quartz driven DJ turntable with upper-torque direct drive
- Adjustable stop speed (0.2 - 6 sec.)
- Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
- Precision manufactured, die cast aluminium turntable
- Rubber inlays for reduction of vibrations and background noise
- Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
- Universal connection for pickup systems (SME)
- Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
- Quartz lock
- Additional start/stop button for vertical positioning
- Reverse function: switch for forwards and reverse operation
- Recessed connection cavity for easy installation in cases & seamless adjustment
- Phono and line out (no grounding required)
- Removable mains and RCA cable
- Safety mains switch
- Shock-absorbing feet against vibrations
Technical Data
Turntable:
-
- Type: direct-drive turntable
- Drive: quartz driven upper-torque direct drive
- Motor: 16-pole, 3-phase, brushless motor
- Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
- Starting torque: 2.8 – 4.5 kg/cm (adjustable)
- Adjustable stop time (0.2 - 6 sec.)
- Start-up time / change to RPM: 55dB (DIN-B)
- Brake system: electronic brake
Platter:
-
- Material: die cast aluminium
- Diameter: 332 mm
- Weight: approx. 1.5 kg
Tone arm:
-
- Type: universal, static balanced, S-shaped
- Effective length: 230 mm
- Overhang: 15 mm
- Tracking error range: < 3°
- VTA setting range: 0-6 mm
- Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
- Anti-skating range: 0 – 3 g
- Effective tone arm mass: 30 g
Connections:
-
- 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
General:
-
- Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
- Power consumption: 13 W
- Dimensions: 458 x 354 x 144,6 mm
- Weight: approx. 11.7 kg
Accessories included:
- turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, power cord, operating instructions
|
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO out (gold-plated), 1x GND
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
| | Cardan bearing with zero-mass tracking force setting by a
high-precision torsion spring.
Removable headshell with 1/2 inch fixing holes. Adjustable
tracking force and anti-skating.
Headshell made of carbon fiber for special rigid torsion.
Chassis technology
Solid wooden console. Floating sub-chassis.Vibration
-damped aluminum turntables with anti-static felt mat.
Drive technology
Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone
arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back
archived discs with a rotational speed of 78 Upm.
Delivered with magnetic pick-up OMB 10.
High quality, fully automatic turntable with three speeds (33, 45, 78 rpm). This turntable meets all the criteria. Sophisticated technology, greatest convenience combined with great sound leaves the listener with no unfulfilled wishes.
Tone arm technology:
Cardan bearing with zero-mass tracking force setting, thanks to precision torsion spring. Detachable headshell with 13mm (1/2-inch) fixing-holes. Adjustable tracking force and anti-skating. Extremely rigid headshell made of carbon fiber.
Chassis technology:
Solid wooden chassis. Floating sub chassis. Vibration damping aluminium platter with antistatic felt mat.
Drive technology:
Belt drive with polished flat belt. DC motor with electronic speed control. Viscosity-damped arm lift. Automatic tone arm cue. Auto Stop with tone arm return. Playback option for archive disks with 78 rpm speed. Delivered with OMB 10 cartridge.
Specifications:
- Speed r/min.: 33/45/78
- Speed a ccuracy in% DIN / WRMS: < -/+ 0,07 / 0,04 % DIN
- Rumble-to-noise ratio: 48 dB
- Rumble-noise ratio: 72 dB
- Cartridge system: OMB 10
- Frequency Response: 20 Hz - 22 kHz
- Depth sensing capability (300 Hz): 70 µm at 315 Hz
- Dimensions (WxHxD): 440 x 119 x 360 mm
- Weight: 5,43 kg
- Colour: black / silver
- Power supply: 12V DC, 150 mA
|
Reviews
There are no reviews yet.