| Content |
Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the 'perfect needle', it ensures perfect reproduction of sound without wear on your vinyl.
Replacement stylus to be used in Ortofon Qbert OM and Concorde cartridges. Provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. The Ortofon Qbert Stylus is considered by some to be the 'perfect needle', it ensures perfect reproduction of sound without wear on your vinyl.
Ortofon Qbert Concorde Cartridge Specifications:Frequency response: 20 to 20.000 Hz
Output: 11mV
Channel separation nominal: 22dB
Inductance: 920mH/ch
Weight: 18.5g
Tracking force: 3 grams
Recommended load: 47K ohms 200pf
Stylus tip: Spherical
|
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| Stylus 305
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz + 2 / - 3 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
spherical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,5-2,0 g (12,5-20 mN) |
| Tracking force, recommended |
1,5 g (15 mN) |
| Tracking angle |
20° |
| Stylus colour |
Grey |
|
|
| Recommended for following cartridges |
Series 305 Universal |
*) Typical value |
Stylus 3E
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-18.000 Hz + 2 / - 3 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,5-2,0 g (15-20 mN) |
| Tracking force, recommended |
1,75 g (17,5 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value
| DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S | Ortofon 510MKII Stylus Technical Data
- Frequency range20-23.000 Hz
- Frequency response20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force70 µm
- Compliance, dynamic, lateral25 µm/mN
- Stylus typeElliptical
- Stylus tip radiusr/R 8/18 µm
- Equivalent stylus tip mass0,3 mg
- Tracking force range1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended1,5 g (15 mN)
- Tracking angle20°
- Stylus colourBlack
- Recommended for following cartridgesSeries 510 Mkll, 510, 510 P
|
|
Reviews
There are no reviews yet.