ORTOFON STYLUS DJ E Needle

50.84 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DJ E Replacement stylus Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever Features Special Elliptical stylus and a special developed and extremely balanced cantilever. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very […]

 

Read more

DJ E Replacement stylus

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

The DJ series has been known to many as the “jack of all trades,” with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

DJ E Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. –   6 mV
Channel balance at 1kHz  –  2 dB
Channel separation at 1kHz  –  23 dB
Channel separation at 15 kHz  –  15 dB
Frequency range at -3dB  –  20-22.000 Hz
Frequency response –   20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force  –  80 μm
Compliance, dynamic lateral  –  9 μm/m N
Stylus type  –  Special Elliptical
Stylus tip radius  –  r/R 13/25 μm

Tracking force range  –  2,0-4,0 g (20-40 mN)
Tracking force recommended  –  3,0 g (30 mN)
Tracking angle –   20°
Internal impedance, DC resistance  –  750 Ohm
Internal inductance  –  450 mH
Recommended load resistance   – 47 kOhm
Recommended load capacitance –  200-600 pF
Cartridge weight  –  18,5 g

Compatible with cartridges –  DJ S

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON STYLUS DJ E Needle”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON STYLUS DJ E Needle removeORTOFON STYLUS 14 removeORTOFON STYLUS 540MKII removeORTOFON 2M BLUE REPLACEMENT STYLUS Nude Elliptical Type removeORTOFON 40 REPLACEMENT STYLUS removeORTOFON 305 REPLACEMENT STYLUS remove
NameORTOFON STYLUS DJ E Needle removeORTOFON STYLUS 14 removeORTOFON STYLUS 540MKII removeORTOFON 2M BLUE REPLACEMENT STYLUS Nude Elliptical Type removeORTOFON 40 REPLACEMENT STYLUS removeORTOFON 305 REPLACEMENT STYLUS remove
Image
SKUSTYLUS DJ ESTYLUS14540MKIIST2MBLUESTYLUS40ORT305ST
Rating
Price 50.84 incl. GR VAT57.00 incl. GR VAT319.00 incl. GR VAT 151.28 incl. GR VAT329.00 incl. GR VAT49.00 incl. GR VAT
Stock

In stock (can be backordered)

In stock

In stock

Available on backorder

In stock

In stock

AvailabilityIn stock (can be backordered)In stockIn stockAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

DJ E Replacement stylus

Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

DJ E Stylus Technical data

Output voltage at 1000Hz, 5cm/sec. -   6 mV
Channel balance at 1kHz  -  2 dB
Channel separation at 1kHz  -  23 dB
Channel separation at 15 kHz  -  15 dB
Frequency range at -3dB  -  20-22.000 Hz
Frequency response -   20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force  -  80 μm
Compliance, dynamic lateral  -  9 μm/m N
Stylus type  -  Special Elliptical
Stylus tip radius  -  r/R 13/25 μm

Tracking force range  -  2,0-4,0 g (20-40 mN)
Tracking force recommended  -  3,0 g (30 mN)
Tracking angle -   20°
Internal impedance, DC resistance  -  750 Ohm
Internal inductance  -  450 mH
Recommended load resistance   - 47 kOhm
Recommended load capacitance -  200-600 pF
Cartridge weight  -  18,5 g

Compatible with cartridges -  DJ S

Ortofon 14 Stylus Technical Data

  • Frequency range 20-22.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 2 dB
  • Tracking ability at 315Hz at recommended tracking force *) 70 µm
  • Compliance, dynamic, lateral 25 µm/mN
  • Stylus type Elliptical
  • Stylus tip radius r/R 8/18 µm
  • Equivalent stylus tip mass 0,5 mg
  • Tracking force range 1,0-1,5 g (10-15 mN)
  • Tracking force, recommended 1,25 g (12,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges TM 14U
  • Ortofon 540MKII Stylus Technical Data

  • Frequency range 20-27.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force 90 µm
  • Compliance, dynamic, lateral 30 µm/mN
  • Stylus type Nude FG 70
  • Stylus tip radius r/R 5/70 µm
  • Equivalent stylus tip mass 0,3 mg
  • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended 1,5 g (15 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges Series 540 Mkll, 540, 540 P
  • Stylus 2M Blue
    Technical data
    Frequency range 20-25.000 Hz
    Frequency response 20-20.000 Hz + 2 / - 1 dB
    Tracking ability at 315Hz at recommended tracking force *) 80 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type Nude Elliptical
    Stylus tip radius r/R 8/18 µm
    Equivalent stylus tip mass 0,5 mg
    Tracking force range 1,6-2,0 g (16-20 mN)
    Tracking force, recommended 1,8 g (18 mN)
    Tracking angle 20°
    Stylus colour Blue
    Recommended for following cartridges 2M Blue
    *) Typical value

    Stylus 40

    Technical data
    Frequency range 20-30.000 Hz
    Frequency response 20-30.000 Hz + 2 / - 3 dB
    Tracking ability at 315Hz at recommended tracking force *) 90 µm
    Compliance, dynamic, lateral 25 µm/mN
    Stylus type Nude FG 70
    Stylus tip radius r/R 5/70 µm
    Equivalent stylus tip mass 0,3 mg
    Tracking force range 1,25-1,75 g (12,5-17,5 mN)
    Tracking force, recommended 1,5 g (15 mN)
    Tracking angle 20°
    Stylus colour Black

     
    Recommended for following cartridges OM 40, OM 40 GOLD 
    *) Typical value
    Stylus 305
    Technical data
    Frequency range 20-20.000 Hz
    Frequency response 20-18.000 Hz + 2 / - 3 dB
    Tracking ability at 315Hz at recommended tracking force *) 60 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type spherical
    Stylus tip radius r/R 8/18 µm
    Equivalent stylus tip mass 0,5 mg
    Tracking force range 1,5-2,0 g (12,5-20 mN)
    Tracking force, recommended 1,5 g (15 mN)
    Tracking angle 20°
    Stylus colour Grey
    Recommended for following cartridges Series 305 Universal
    *) Typical value
    Weight0.30 kg0.20 kg0.20 kg0.20 kg0.20 kg0.05 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.05 kg