PALMER AUDIO PCABM CAB M – Passive Cabinet Merger

28.51 incl. GR VAT

Available on backorder

EAN: 4049521147449
Installments calculation
CompareAdd to wishlist Submit Better Price
The concept behind the cab merger may be very simple, but it fills an important gap! Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible. In addition, you can select whether the cabinets should be wired in parallel or series  with one another. For example, if […]

 

Read more

The concept behind the cab merger may be very simple, but it fills an important gap!

Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible.

In addition, you can select whether the cabinets should be wired in parallel or series  with one another. For example, if you interconnect two 8 ohm cabinets.  The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.

  • Type: passive
  • Number of inputs: 2
  • Input connections: 6.3mm jack
  • Number of outputs: 2
  • Output connections: 6.3mm jack
  • Cabinet material: die-cast aluminium
  • Case surface: powder-coated
  • Width: 105 mm
  • Depth: 35 mm
  • Height: 35 mm
Weight 0.13 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PCABM CAB M – Passive Cabinet Merger”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PCABM CAB M - Passive Cabinet Merger removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeKONIG & MEYER 14330 "Jazz" Saxophone stand removePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removePALMER GA 03 Splitter for Guitars Y-Box Active remove
NamePALMER AUDIO PCABM CAB M - Passive Cabinet Merger removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeKONIG & MEYER 14330 "Jazz" Saxophone stand removePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removePALMER GA 03 Splitter for Guitars Y-Box Active remove
Imagepalmer audio GA03_splitter box guitars active
SKUPCABMG30QL00000PMBLAM19KM00023PGA04PGA03
Rating
Price 28.51 incl. GR VAT 73.00 incl. GR VAT 428.88 incl. GR VAT 49.00 incl. GR VAT 386.42 incl. GR VAT 117.79 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Clinking input with 1 Mohm input impedance
  • Output AMP1 as parallel circuit
  • Output AMP2 is electronically converted with a subsequent transformer stage
  • Operation with 9V battery recommended
  • 5 years manufacturing guarantee
Content

The concept behind the cab merger may be very simple, but it fills an important gap!

Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible.

In addition, you can select whether the cabinets should be wired in parallel or series  with one another. For example, if you interconnect two 8 ohm cabinets.  The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.

  • Type: passive
  • Number of inputs: 2
  • Input connections: 6.3mm jack
  • Number of outputs: 2
  • Output connections: 6.3mm jack
  • Cabinet material: die-cast aluminium
  • Case surface: powder-coated
  • Width: 105 mm
  • Depth: 35 mm
  • Height: 35 mm
  • Large amp "X” stand with adjustable back tier
  • Adjusts so that the back tier rests on the back panel of open back guitar amps/combos and does not enter the empty space
  • This unique design assures no damage to tubes or electronics
  •  
  • Αpplication: Amplifier
    Type: Adjustable
    Type: Single
     
  • The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power supply.

     


    Practical, easy to use and stable stand for Eb alto saxophones. Solid square-type aluminum tubes with a large central locking screw, protective rubber bumps where the stand connects with the saxophone body and the bell. Embedded foot end caps. Folds compactly, can be transported in the supplied velour bag in the saxophone bell.

    • Weight: 0.3 kg
    • Height: 310 mm

    Also available as 2, 4 and 16 Ohm Versions

    Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

    Technical specifications:

    • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
    • Input impedance: 8 ohms, max.
    • Input load: 120 w RMS
    • Input level display: 6 LED's
    • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
    • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
    • Level: unbalanced 0 dB, balanced -10 dB at 25 w
    • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
    • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
    • Both signals attenuable
    "When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.  
    Technical specifications:
    Product type
    Splitters
    Split type
    1 in 2
    Inputs
    1
    Input connectors
    6.3 mm jack
    Adjustable input
    no
    Number of split-outputs per canal
    1
    Output connectors
    6.3 mm jack
    THRU outputs/channel
    1
    Transformer isolated outputs
    Yes
    Adjustable output
    no
    Controls
    ground lift, phase
    Indicators
    Power
    Operating voltage
    9 V block, 9 V DC power supply
    Width
    125 mm
    Depth
    80 mm
    Height
    45 mm
    Cabinet material
    sheet steel
    Cabinet surface
    Powder coated
    Weight
    0,528 kg
    Optional Power Supply PW9V
    Weight0.13 kg1.00 kg1.51 kg0.30 kg2.70 kg0.25 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.13 kg
    Weight 1.00 kg
    Weight 1.51 kg
    Weight 0.30 kg
    Weight 2.70 kg
    Weight 0.25 kg