PALMER AUDIO PGA01 TOOLS Triline Guitar Router

A/B-Y box for connecting one or more guitars to different amplifiers. Includes additional features such as level balancing for each channel, and a tuner output. The Triline basically routes guitar signals to different amplifiers and functions as an active A/B/Y box. Its universal design makes it possible to utilize various options:

1. Asingle guitar can be routed to either amplifierAor B or to both.
2. Two guitars can be routed to different systems, e.g. an electric guitar to a guitar amplifier, and an electro-acoustic guitar to a PAsystem via an integral DI box.
3. Using an additional device (E-Frog), one guitar can switch between two amplifier heads. However, both amplifiers use only one speaker cabinet, i.e. the output of the amplifier in use is routed to the speaker cabinet. A load box prevents damage to the amplifier which is not in use. The routing is done without any audible delay or clicking noise. The outputs to the amplifiers are transformer isolated to prevent ground loops and humming. You can match the channel gain using the trim potentiometers. There is a special output for connecting up a tuning device. During tuning, the amplifier outputs can be muted. 

Specifications:

• Inputs: 2 x¼" Jack A/B (guitar or other instrument)
• Outputs: (floating ground), Channel B with additional balanced XLR/m for connection to mixing console mic input, can be muted
• Output tuner: 1 , "Control" output for "E-Frog" (¼" Jack)
• External power adaptor with 4 pin screw connector
• 3 foot switches: ChannelA, Channel A+B, Channel B
• 3 Dip switches for ground lift 2 x ¼" Jack x¼" Jack

The V860 represents a new standard in guitar volume pedals. It\'s a reimaging of the classic VOX pedal design exemplified by its well-known wah pedals. The stylish aluminum body features a blasted and anodized finish that is both tough and classy. The pedal mechanism uses gears with a high tooth count, ensuring durability and smooth operation. The components are completely hand-wired, minimizing any change in the tonal character.

The FS-10 is a multi-function footcontroller that allows access to all 128 patches plus the tuner function. It operates in three modes: 
Patch Mode – This mode allows you to switch between the three banks of four patches accessible on the front panel of the amp (patches 1-12) in addition to patches 13-128, plus access to the tuner function and the ability to change to the other modes.

Effects mode – This offers individual switching of the effects within a patch, operating more like traditional effects pedals. In this mode the fourth switch is used to control the tap time function. 8.

Navigation mode – Enables access to the complete set of 128 patches stored on the amp. These can be stepped through one at a time, or in banks. Whilst in this mode you can also store patches.

• Function on/off
• Without LED
• 5m cable
• Screwed steel housing
• Kink protection and cable feed-through
• Mono jack
• “Channel" label
• Suitable for all amplifiers with simple on/off switch
• Dimensions: 84 x 45 x 112 mm
• Compatible with: Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004

Don't feel like carrying around a full-sized foot controller? Now you don't have to! The FBV2™ lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.

• Scrolls through Channels A,B,C, & D
• Self-powered though the locking cable

• Spider Valve
• Spider II
• Spider III
• Flextone III
• Vetta
• Vetta II
• HD 147
• Pod 2.0
• Pod XT
• Pod XT Pro
• Bass Pod XT
• Bass Pod XT Pro

Designed to work with: ID:Core Stereo 20, ID:Core Stereo 40, ID:Core Stereo 40H and ID:Core BEAM, Connect a Blackstar FS-11 footcontroller (not supplied) to control your ID:Core in one of the following modes: In Alternative Mode (selected via INSIDER) patches will cycle on a ʻloopʼ. e.g. switching up from Bass 2 will move to Clean Warm. When in Manual Mode, the effect of any footcontroller switch will depend on its last state. Pressing Switch 1 will return the amplifier to Patch Mode. Pressing Switch 2 will toggle the effects off and on without returning to Patch Mode.