PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox

386.42 incl. GR VAT

Available on backorder

EAN: 4049521049262
Installments calculation
CompareAdd to wishlist Submit Better Price
Also available as 2, 4 and 16 Ohm Versions Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive […]

 

Read more

Also available as 2, 4 and 16 Ohm Versions

Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 8 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED’s
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable
Weight 2.70 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeKONIG & MEYER 14330 "Jazz" Saxophone stand removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removeQUIKLOK BS-317 Low Profile Amp Stand removeGRAVITY GS 08 WMB Wall-Mount Guitar Hanger removeMOTU ZBox Amplify guitar tone remove
NamePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeKONIG & MEYER 14330 "Jazz" Saxophone stand removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removeQUIKLOK BS-317 Low Profile Amp Stand removeGRAVITY GS 08 WMB Wall-Mount Guitar Hanger removeMOTU ZBox Amplify guitar tone remove
Image
SKUPGA04M19KM00023G30QL00000G30QL00002GGS08WMBzbox
Rating
Price 386.42 incl. GR VAT 49.00 incl. GR VAT 73.00 incl. GR VAT 49.00 incl. GR VAT 5.12 incl. GR VAT48.39 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

In stock (can be backordered)

In stock

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockIn stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Universal wall mount guitar hanger
  • Self adjusting yoke
  • Specially formulated rubber coating
  • Interchangeable colour coding ring
Content

Also available as 2, 4 and 16 Ohm Versions

Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 8 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED's
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable

Practical, easy to use and stable stand for Eb alto saxophones. Solid square-type aluminum tubes with a large central locking screw, protective rubber bumps where the stand connects with the saxophone body and the bell. Embedded foot end caps. Folds compactly, can be transported in the supplied velour bag in the saxophone bell.

  • Weight: 0.3 kg
  • Height: 310 mm
  • Large amp "X” stand with adjustable back tier
  • Adjusts so that the back tier rests on the back panel of open back guitar amps/combos and does not enter the empty space
  • This unique design assures no damage to tubes or electronics
  •  
  • Αpplication: Amplifier
    Type: Adjustable
    Type: Single
     
  • Double-Brace, Low Profile Stand for Large Amps  and Combos Height adjustment range Front tier: 8.25" to 11" - 21 to 28 cm Back tier: 11.4" to 18.6" - 29 to 47.2 cm Width: 19.3" - 49 cm Folded height: 22" - 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: 100lb - 45.2 kg Weight: 6.6 lb - 3 kg

    Description
    The GS 08 WMB is a universal wall mount hanger for acoustic, electric and bass guitars. The yoke is self adjusting to accommodate any headstock. It is coated with specially formulated rubber that provides a secure grip and does not mar the finish. Not recommended for guitars with nitro laquer.

    Specifications

    • Universal wall mount guitar hanger
    • Self adjusting yoke
    • Specially formulated rubber coating
    • Interchangeable colour coding ring
    • Material: steel/plastic
    • Colour: Black
    • Surface: rubber coated
    • Suitable for: acoustic guitars , bass guitar , electric guitar
    • Number of guitars: 1
    • Weight: 0,168 kg
    ZBox Overview Take back your guitar tone! Today's guitar amp modeling plug-ins are simply amazing in their ability to faithfully model real guitar amplifiers. From IK Multimedia's Amplitube, to Waves, to Native Instruments, to Line 6, to Digital Performer's included Custom '59, you can plug your guitar directly into your audio interface, dial up a guitar tone in your plug-in software, and play. The sound is simply stunning. But wait. They're ALL MISSING SOMETHING. In fact, they're missing a crucial element of the signal path that simply cannot be modeled in software: the proper input impedance of a real guitar amplifier. When you plug your guitar into your audio interface, the interface's impedance does not match the typical levels found on a real guitar amplifier. The result? No matter how hard you try, you'll never quite be able to replicate the true sound and "feel" of playing into a real guitar amp. The sound will be just a little more thin and unresponsive than the real thing. The solution? ZBox! ZBox matches the output impedance (”Z”) of your guitar to the impedance of a non-amp input, such as the mic/instrument preamp inputs on your audio interface. Without proper impedance matching, your guitar wonʼt sound natural or "feel right”. ZBoxʼs unique advantage? Authentic matching circuits that emulate the two-jack switching network found on many classic amplifiers, complete with analog simulation of the input tube grid. Only ZBox delivers the most authentic amplifier impedance matching available for the absolute truest sound and "feel” from your guitar. ZBox is the "missing link” for digital guitar processing, providing the hardware-driven input characteristics required to truly emulate a real guitar amp. If you use Digital Performer's Custom 59 amp model plug-in, or a third-party guitar plug-in product like IK Multimedia Amplitube, Waves GTR, Native Instruments Guitar Rig, or similar guitar modeling software, use ZBox to further enhance the authenticity of the tones you play from these products! Just plug your guitar into ZBoxʼs Lo-Z or Hi-Z input (whichever sounds better), and plug the ZBox into the guitar input on the destination device (audio interface, wireless box, mixer, recorder, PA, etc.) as shown. Guitar inputs on audio interfaces, mixers, PAs, wireless transmitters and other similar devices (often labeled "instrument”) usually have impedances that differ significantly from most guitar amps. This mismatch can make your guitar sound too bright, thin and brittle. ZBox provides the proper input impedance levels to match your guitarʼs output signal. The result? Your guitar sounds like it is connected to a real guitar amp and has a much warmer tone and authentic "response.” This is especially true when using digitally modeled guitar processing software (plug-ins) on your computer, audio interface, digital mixer, etc. To support a wide range of guitars, ZBOX provides authentic "Hi-Z” and "Lo-Z” inputs, just like the ones found on many classic guitar amps, complete with analog simulation of the input tube grid.
    Weight2.70 kg0.30 kg1.00 kg3.10 kg0.20 kg7.00 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 2.70 kg
    Weight 0.30 kg
    Weight 1.00 kg
    Weight 3.10 kg
    Weight 0.20 kg
    Weight 7.00 kg