PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox

386.42 incl. GR VAT

Available on backorder

EAN: 4049521049262
Installments calculation
CompareAdd to wishlist Submit Better Price
Also available as 2, 4 and 16 Ohm Versions Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive […]

 

Read more

Also available as 2, 4 and 16 Ohm Versions

Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 8 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED’s
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable
Weight 2.70 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removeGRAVITY GS 08 WMB Wall-Mount Guitar Hanger removePALMER AUDIO PCABM CAB M - Passive Cabinet Merger removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeQUIKLOK BS-317 Low Profile Amp Stand remove
NamePALMER AUDIO PGA04 TOOLS Speaker-Simulator ADIG-LB with Loadbox removeQUIKLOK BS-620 Stand for Guitar Amp / Bass Amp / Keyboards Amp removeGRAVITY GS 08 WMB Wall-Mount Guitar Hanger removePALMER AUDIO PCABM CAB M - Passive Cabinet Merger removePALMER PMBLA Pro PMBLA - Dual Channel Line Merger active removeQUIKLOK BS-317 Low Profile Amp Stand remove
Image
SKUPGA04G30QL00000GGS08WMBPCABMPMBLAG30QL00002
Rating
Price 386.42 incl. GR VAT 73.00 incl. GR VAT 5.12 incl. GR VAT 28.51 incl. GR VAT 428.88 incl. GR VAT 49.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stock (can be backordered)Available on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Universal wall mount guitar hanger
  • Self adjusting yoke
  • Specially formulated rubber coating
  • Interchangeable colour coding ring
Content

Also available as 2, 4 and 16 Ohm Versions

Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.

Technical specifications:

  • Loadbox: 6.3 mm jack input with parallel THRU socket for speaker operation Loadbox
  • Input impedance: 8 ohms, max.
  • Input load: 120 w RMS
  • Input level display: 6 LED's
  • Output: 2 x 6.3 mm jack, unbalanced, floating ground, 1 x balanced XLR output
  • Output impedance: jack: 10.000 ohms, XLR: 600 ohms
  • Level: unbalanced 0 dB, balanced -10 dB at 25 w
  • Input Controls: Volume FiIlter, LOW, HIGH, LITE/BROWN-switch for tone shaping
  • Full Range Volume for unfiltered signal, used in conjunction with the HI-CUT to emulate the bright sound of, e.g., 10-inch speakers
  • Both signals attenuable
  • Large amp "X” stand with adjustable back tier
  • Adjusts so that the back tier rests on the back panel of open back guitar amps/combos and does not enter the empty space
  • This unique design assures no damage to tubes or electronics
  •  
  • Αpplication: Amplifier
    Type: Adjustable
    Type: Single
     
  • Description
    The GS 08 WMB is a universal wall mount hanger for acoustic, electric and bass guitars. The yoke is self adjusting to accommodate any headstock. It is coated with specially formulated rubber that provides a secure grip and does not mar the finish. Not recommended for guitars with nitro laquer.

    Specifications

    • Universal wall mount guitar hanger
    • Self adjusting yoke
    • Specially formulated rubber coating
    • Interchangeable colour coding ring
    • Material: steel/plastic
    • Colour: Black
    • Surface: rubber coated
    • Suitable for: acoustic guitars , bass guitar , electric guitar
    • Number of guitars: 1
    • Weight: 0,168 kg

    The concept behind the cab merger may be very simple, but it fills an important gap!

    Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible.

    In addition, you can select whether the cabinets should be wired in parallel or series  with one another. For example, if you interconnect two 8 ohm cabinets.  The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.

    • Type: passive
    • Number of inputs: 2
    • Input connections: 6.3mm jack
    • Number of outputs: 2
    • Output connections: 6.3mm jack
    • Cabinet material: die-cast aluminium
    • Case surface: powder-coated
    • Width: 105 mm
    • Depth: 35 mm
    • Height: 35 mm

    The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power supply.

     


    Double-Brace, Low Profile Stand for Large Amps  and Combos Height adjustment range Front tier: 8.25" to 11" - 21 to 28 cm Back tier: 11.4" to 18.6" - 29 to 47.2 cm Width: 19.3" - 49 cm Folded height: 22" - 56cm Frame tube size: 20 x 15 mm Tier tube size: 28mm Weight capacity: 100lb - 45.2 kg Weight: 6.6 lb - 3 kg

    Weight2.70 kg1.00 kg0.20 kg0.13 kg1.51 kg3.10 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 2.70 kg
    Weight 1.00 kg
    Weight 0.20 kg
    Weight 0.13 kg
    Weight 1.51 kg
    Weight 3.10 kg