Content | The PECHOR is an easy to use but velvety sounding Chorus effect. With only three controllers Rate, Depth and Intensity you will easily and quickly find the sound you're looking for!
Technical Specifications
- Input impedance: 470 K ohms
- Output impedance: 100 k ohms
- Residual noise: -85 dB (all controls centered)
- Controls: RATE, DEPTH, INTENSITY
- Indicator: LED
- Connectors: IN, OUT, DC input (9 V)
- Footswitch: true bybass
- Power requirements: 9 V PP3 or 9 V DC supply (optional)
- Power consumption: 25 mA (9 V DC)
- Dimensions (W x H x D): 120 mm x 120 mm x 56 mm
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
|
The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.
The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.
The main features of the Digitech XHP HYPER PHASE include:
- Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
- 7 Different phase types
- Speed, Depth, Regen, and Mode controls
- Triggering and step capability
- Stereo outputs with switchable CIT Cabinet Modeling
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
| Features twin modes for an expanded range of distortion—taking you from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob.
The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.
- Compact overdrive pedal with warm, smooth overdriven sounds
- Unique asymmetric overdrive circuitry for a classic, natural tube amp growl
- Tone control provides precise adjustment of drive sound
- BOSS 5-year warranty
Input Impedance |
1 M ohms |
Output Impedance |
10 k ohms or greater |
Equivalent Input Noise Level |
–120 dBu or less (IHF-A, Typ.) |
Connectors |
INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor Jack |
Power Supply |
DC 9 V: Dry Battery 9 V type, AC Adaptor |
Current Draw |
12 mA (DC 9 V) |
Accessories |
Dry Battery 9 V type (6F22/9 V) |
Option |
AC Adaptor (PSA-Series) |
Size and Weight ( incl. battery ) |
Width |
|
Depth |
|
Height |
|
Weight |
|
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
|
Reviews
There are no reviews yet.