PALMER PMONICON Pro MONICON – Passive Monitor Controller

70.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: 4049521156564
Installments calculation
CompareAdd to wishlist Submit Better Price
Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. […]

 

Read more

Palmer Monicon, and the volume is right!

With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking “little helper” that is a typical Palmer product.

  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz – 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm

 

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER PMONICON Pro MONICON – Passive Monitor Controller”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER PMONICON Pro MONICON - Passive Monitor Controller removeMackie Big Knob Studio+ 2in 4out removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier removeMackie Big Knob Studio 3in 2out removePRESONUS ISPD-4 Isolation Pads for Studio Monitors remove
NamePALMER PMONICON Pro MONICON - Passive Monitor Controller removeMackie Big Knob Studio+ 2in 4out removeART HEADAMP 4 OUTPUT STEREO HEADPHONE AMP removeBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier removeMackie Big Knob Studio 3in 2out removePRESONUS ISPD-4 Isolation Pads for Studio Monitors remove
ImageBEHRINGER HA400 Ultra-Compact 4-Channel Stereo Headphone Amplifier
SKUPMONICON149.078AT/EM/000036E005298149.077APA2019-00695
Rating
Price 70.00 incl. GR VAT 317.99 incl. GR VAT 97.00 incl. GR VAT 35.50 incl. GR VAT 243.78 incl. GR VAT50.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Precise control of your headphone volume
  • Ideal for a full band with 4 high-quality channels
  • Perfect for stage and studio applications
  • DC 12V adapter included
ContentPalmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 

Mackie Big Knob Studio Plus Monitor Controller and Interface

  • Four Sources and Three Monitor Pairs
  • Classic Big Knob Volume Control
  • Independent Trim on All Sources
  • Mono, Mute, and Dim Functions

The Mackie Big Knob Studio Plus is a monitor controller and interface that allows you to choose between four input sources and three monitor pairs. It can be used for project and professional studios and is designed to increase your workflow for recording and mixing applications.

Featuring independent trim on all sources and monitor outs, the Big Knob Studio Plus has mono, mute, and dim functions along with a flexible 2x4 USB recording interface. It is built with two combo XLR-1/4" Onyx mic inputs with phantom power for condenser microphones. Recording and playback is at 24-bit / 192 kHz resolution and the cue mix allows for controlled blending of direct inputs with other signals for zero-latency recordings. Choice of recording paths provides flexibility for applications like podcasting and more.

Additionally, other features include flexible source connections, a convenient 3.5mm input for your smartphone, dual headphone outputs with independent level control, a built-in talkback mic and external mic input, a footswitch input, and 16-segment input metering.

Finally, with its sturdy and built-like-a-tank design, the interface is compatible with all major DAWs on both Mac and Windows platforms. The Big Knob Studio Plus features a download for ProTools | First and Waveform software and The Musician's Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer's serial number on the website.

Professional Source and Monitor Selection

  • Choose between four sources and three monitor pairs
  • Classic Big Knob volume control
  • Independent trim on all sources and monitor outs
  • Mono, mute, and dim functions

Flexible 2x4 USB Recording Interface

  • Two boutique-quality Onyx mic preamps including phantom power for condenser microphones
  • High-resolution 24-bit / 192 kHz recording and playback
  • Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording

Comprehensive Feature Set for Professional Studios

Flexible source connections including convenient 3.5mm input for your smartphone
Dual headphone outs with independent level control
Built-in talkback mic and external talkback mic input for easy communication with artists
16-segment high-resolution input source metering

Professional Production Content

  • Content
    • Pro Tools | First and Waveform OEM professional software and plugin packages included
    • The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
  • Included Software from Avid, including Pro Tools | First
    • An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for macOS and Windows operating systems. 
    • In addition to the powerful plug-ins within Pro Tools | First, this mixer comes with the exclusive Mackie Musician Collection featuring 23 fantastic plug-ins, including:
      • Avid 304E EQ: Add musical warmth with a treble and bass equalizer with sweepable mid control
      • Avid 304C Compressor: Tweak the clarity, balance, and rhythmic feel of music with this optical-modeled compressor
      • BBD Delay: Create delay, chorus, and vibrato effects based on a classic guitar pedal
      • Black Op Distortion: Add rich distortion based on a classic distortion pedal
      • Black Shiny Wah: Achieve the famous classic tones of a respected wah wah pedal
      • Black Spring Reverb: Get the twang and space of a vintage amplifier
      • C1 Chorus: Emulates a classic chorus pedal
      • DC Distortion: Dial up a range of overdriven tones with this Avid custom distortion effect
      • Eleven Lite: Get the sound of popular guitar amps and speaker cabinets
      • Flanger: Create esoteric sounds with this homage to vintage and modern flangers
      • Graphic EQ: Sculpt frequencies with ease
      • Gray Compressor: Add warmth to tracks based on a vintage Ross compressor
      • Green JRC Overdrive: Get the coveted sounds of a classic IC overdrive pedal
      • In-Tune: Keep your instruments in tune with this digital tuner
      • Orange Phaser: Create interesting effects with this phase shifter based on a classic design
      • Roto Speaker: Recreate the sounds of a Leslie rotary speaker cabinet
      • Sci-Fi: Add analog synth-type ring and frequency modulation
      • Studio Reverb: Create natural-sounding reverb and ambient effects
      • Tape Echo: Add vintage analog delay and chorus effects
      • Tri Knob Fuzz: Get the Hendrix tone with this fuzz box based on one of the first fuzz pedals
      • Vari-Fi: Create the effect of audio changing tape speed
      • Vibe Phaser: Add phase-shift and rotary speaker effects
      • White Boost: Boost gain without coloring tone

Inputs 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Inputs
4 x 1/4" TRS Balanced/Unbalanced Line Inputs
2 x 1/4" TRS Balanced/Unbalanced Cue Input
1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Input
1 x 3-Pin XLR Talkback Mic Input
Outputs 2 x 1/4" TRS Balanced/Unbalanced 2-Track Line Outputs
6 x 1/4" TRS Balanced/Unbalanced Monitor Outputs
2 x 1/4" TRS Balanced/Unbalanced Monitor/Line Outputs
2 x 1/4" TRS Unbalanced Headphone Outputs
Footswitch Input 1 x 1/4" TRS
USB I/O 1 x USB 2.0 Type-B
Resolution 24-Bit / 192 kHz
Frequency Response 20 Hz to 20 kHz (±0.5 dB, Unity Gain, +4 dBu Input)
Noise Mic Inputs to Outputs: < -125 dBu RMS, A-Weighted (150 Ohms Terminated, 22 kHz Bandwidth)
Line Inputs to Outputs: < -90 dBu RMS, Unweighted (150 Ohms Terminated, 22 kHz Bandwidth)
THD + N <0.01% Unweighted (Unity Gain, 1 kHz at +4 dBu Input, 80 kHz Bandwidth)
Crosstalk < -60 dB at 1 kHz (Unity Gain, -1 dBFS Input)
Attenuation Muted: -60 dB
Dim: -20 dB
Maximum Input Level +22 dBu
Maximum Output Level +22 dBu
Power Requirements 100 to 240 VAC, 50/60 Hz, 0.75 A via Universal Power Supply
Dimensions (W x D x H) 6.8 x 11.9 x 3.2" / 17.3 x 30.2 x 8.1 cm
Weight 4.6 lb / 2.1 kg

HeadAMP - Four Output Stereo Headphone Amp Overview

Most home recordings involve from one to four people, any or all of whom are
going to need headphone monitoring. The monitor amp would be connected
to the tape deck?s headphone output or a mixer output so that the performers
can hear themselves and each other. Of course the same application can apply
to band rehearsals and even home entertainment. HeadAMP provides amplification
and individual volume control for up to 4 headsets. It can be driven by either line-
level or headphone amplifier signals (mono or stereo).

HeadAMP - Four Output Stereo Headphone Amp Specifications:

Signal To Noise Ratio >90dB
IMD (SMPTE) 0.01%
Maximum Input Level +14dBV
Maximum Output Level 20dB per channel
Output Impedance 51 Ohms per channel
Output Connectors Four stereo 1/4? headphone outputs
Power Requirements 12V DC (Adapter included) 
Total Harmonic Distortion

Behringer HA-400 Ultra-Compact 4-Channel Stereo Headphone Amplifier Mini to the max! You can use this super-compact stereo headphone amplifier with practically all headphones?four of them at the same time, to be exact! For example, you can let up to 4 different people in your studio listen to the main mix while the recording is being made, and each listener can determine his own volume level using the dedicated output level controls. The HA400 contains 4 high-power stereo amplifiers that maintain the highest sonic quality even at maximum volume levels. Ultra low-noise 4580 operational amplifiers are included for outstanding audio performance?these are the same op amps found in ?full-size? audio equipment?plus, a DC 12-Volt adapter is included. If you are one of those musicians who like to deck out their equipment with lots of bells and whistles, the HA400 definitely makes a great addition to the functionality of your studio.
The Behringer HA400 offers flexible amplification for up to 4 headphones. Whether you're tracking a full band, playing to a backing track, or just listening to your mix, this compact amp gives every performer diverse volume control. Hear everything with clarity. The HA400 promises high audio quality with zero interference, no matter what headphones you use. Behringer are relied upon by professional musicians everywhere. With the HA400 headphone amplifier, you'll become a part of 50+ years of innovation and expertise.

The Highest Quality Monitoring Possible

Great monitoring is at the heart of a tight performance. Whether you're on stage or in the studio, the HA4000 delivers ultimate control for everyone playing. Discover the highest quality audio from 4 high power, stereo amplifiers. Even at maximum volume, this tidy headphone amp provides clear sound without muddiness or unwanted noise.

Industry Leading Standard

There's a reason why Behringer are leaders in their field. With 50+ years of industry experience, they've built a legacy around exceptional build quality and innovative design. The HA4000 is no exception. Every channel preserves the original sonic qualities of your input signal. That's performance you can trust.

Features

  • Ultra-compact headphone amplifier
  • Ideal for stage or studio use
  • Full control for every channel with 4 independent stereo high-power amplifier sections
  • Extremely high audio quality with virtually all types of headphones, even at maximum volume
  • 12V DC power adapter included
  • Designed and engineered by Behringer in Germany

Specifications

Line Inputs

      • Type: 1/4'' TS Jack, Stereo
      • Impedance: 100kohms
      • Max. input level: +15dBu

Headphone Outputs

      • Type: 1/4'' TRS Jacks, Stereo
      • Impedance: Approx. 80ohms
      • Max. output level: Approx. 40mW in 100ohms

Power Supply

      • Power supply: External power supply 12V

Dimensions/Weight

    • Dimensions: 47mm (H) x 57mm (W) x 104mm (D)
    • Weight: 0.32kg
 

Mackie Big Knob Studio Monitor Controller and Interface

  • Three Sources and Two Monitor Pairs
  • Classic Big Knob Volume Control
  • Independent Trim on All Sources
  • Mono, Mute, and Dim Functions

    The Mackie Big Knob Studio is a monitor controller and interface that allows you to choose between three audio input sources and two monitor pairs. It can be used for project and professional studios and is designed to increase your workflow for recording and mixing applications.

    It features a built-in 2x2 USB recording interface with two Onyx mic preamps and phantom power for condenser microphones. Recording and playback is at 24-bit/192 kHz resolution and the cue mix allows for controlled blending of direct inputs with other signals for zero-latency recording. Choice of recording paths provide flexibility for applications like podcasting and more.

    Additionally, other features include flexible source connections, a convenient 1/8" input for your smartphone, dual headphone outs with independent level control, a built-in talkback mic, and 16-segment high-resolution input source metering.

    Finally, with its sturdy and built-like-a-tank design, the interface is compatible with all major DAWs on both Mac and Windows platforms. The Big Knob Studio features a download for ProTools | First and Waveform software and The Musician's Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer's serial number on the website.

    Professional Source and Monitor Selection

    • Choose between 3 sources and 2 monitor pairs
    • Classic Big Knob volume control
    •  Independent trim on all sources and monitor outs
    • Mono, mute and dim functions

    Flexible 2x2 USB Recording Interface

    • Two boutique-quality Onyx mic preamps including phantom power for condenser microphones
    • High-resolution 192kHz / 24-bit recording and playback
    • Cue mix allows controlled blending of direct inputs with other signals for zero-latency recording

    Comprehensive Feature Set for Professional Studios

    • Flexible source connections including convenient 1/8” input for your smartphone
    • Dual headphone outs with independent level control
    • Built-in talkback mic for easy communication with artists
    • 16-segment high-resolution input source metering

    Professional Production Content

    • Content
      • Pro Tools | First and Waveform OEM professional software and plugin packages included
      • The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
    • Included Software from Avid, including Pro Tools | First
      • An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for macOS and Windows operating systems. 
      • In addition to the powerful plug-ins within Pro Tools | First, this mixer comes with the exclusive Mackie Musician Collection featuring 23 fantastic plug-ins, including:
        • Avid 304E EQ: Add musical warmth with a treble and bass equalizer with sweepable mid control
        • Avid 304C Compressor: Tweak the clarity, balance, and rhythmic feel of music with this optical-modeled compressor
        • BBD Delay: Create delay, chorus, and vibrato effects based on a classic guitar pedal
        • Black Op Distortion: Add rich distortion based on a classic distortion pedal
        • Black Shiny Wah: Achieve the famous classic tones of a respected wah wah pedal
        • Black Spring Reverb: Get the twang and space of a vintage amplifier
        • C1 Chorus: Emulates a classic chorus pedal
        • DC Distortion: Dial up a range of overdriven tones with this Avid custom distortion effect
        • Eleven Lite: Get the sound of popular guitar amps and speaker cabinets
        • Flanger: Create esoteric sounds with this homage to vintage and modern flangers
        • Graphic EQ: Sculpt frequencies with ease
        • Gray Compressor: Add warmth to tracks based on a vintage Ross compressor
        • Green JRC Overdrive: Get the coveted sounds of a classic IC overdrive pedal
        • In-Tune: Keep your instruments in tune with this digital tuner
        • Orange Phaser: Create interesting effects with this phase shifter based on a classic design
        • Roto Speaker: Recreate the sounds of a Leslie rotary speaker cabinet
        • Sci-Fi: Add analog synth-type ring and frequency modulation
        • Studio Reverb: Create natural-sounding reverb and ambient effects
        • Tape Echo: Add vintage analog delay and chorus effects
        • Tri Knob Fuzz: Get the Hendrix tone with this fuzz box based on one of the first fuzz pedals
        • Vari-Fi: Create the effect of audio changing tape speed
        • Vibe Phaser: Add phase-shift and rotary speaker effects
        • White Boost: Boost gain without coloring tone

Inputs 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Inputs
2 x 1/4" TRS Balanced/Unbalanced Line Inputs
1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Input
Outputs 2 x 1/4" TRS Balanced/Unbalanced 2-Track Line Outputs
4 x 1/4" TRS Balanced/Unbalanced Monitor Outputs
2 x 1/4" TRS Unbalanced Headphone Outputs
USB I/O 1 x USB 2.0 Type-B
Resolution 24-Bit / 192 kHz
Frequency Response 20 Hz to 20 kHz (±0.5 dB, Unity Gain, +4 dBu Input)
Noise Mic Inputs to Outputs: < -125 dBu RMS, A-Weighted (150 ohms Terminated, 22 kHz Bandwidth)
Line Inputs to Outputs: < -90 dBu RMS, Unweighted (150 ohms Terminated, 22 kHz Bandwidth)
THD + N <0.01% Unweighted (Unity Gain, 1 kHz at +4 dBu Input, 80 kHz Bandwidth)
Crosstalk < -60 dB at 1 kHz (Unity Gain, -1 dBFS Input)
Attenuation Muted: -60 dB
Dim: -20 dB
Maximum Input Level +22 dBu
Maximum Output Level +22 dBu
Power Requirements 100 to 240 VAC, 50/60 Hz, 0.75 A via Universal Power Supply
Dimensions (W x D x H) 6.4 x 9.9 x 3.2" / 16.3 x 25.1 x 8.1 cm
Weight 3.5 lb / 1.6 kg

Sold in pairs, each PreSonus ISPD-4 isolation pad can be divided into halves and configured in several ways so you can use them with virtually any near-field studio monitors. For small, vertically placed speakers, use half of an isolator per side or employ the full pad, whichever works best. Place two half-pads side-by-side to accommodate larger speakers or horizontal placement.

The speakers shown on the photographs are sold separetely.

Weight1.00 kg2.50 kg0.59 kg0.40 kg2.00 kg0.1 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 2.50 kg
Weight 0.59 kg
Weight 0.40 kg
Weight 2.00 kg
Weight 0.1 kg