| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (mono): 8 ohms
- Power Rating (mono): 75 W
- Back: Open
- Dimensions (W x D x H): 58 x 29 x 45 cm
- Front Grill: detachable
- Speaker Mounting: 1x12" front mounted
ECV75A - Eminence CV-75-Modell
Over ten years in development, we've captured the epitome of British tone. Complete tonal balance - grunt and punch in the lows, warm/tailored mids, and nice, clear, open/airy highs.
SPECIFICATIONS - Nominal Basket Diameter 12“, 305 mm
- Nominal Impedance* 8 ohms
- Power Rating** Watts 75W / Music Program N/A
- Resonance 79Hz
- Usable Frequency Range*** 80Hz-5.5kHz
- Sensitivity 102.2 dB
- Magnet Weight 56 oz.
- Gap Height 0.313“, 8mm
- Voice Coil Diameter 1.75“, 44.5mm
| Marshall 1960TV 100W 4x12'' Guitar Speaker Cabinet
Invest in that fat sound!
The Marshall 1960TV Cabinet has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue it was never offered in the past this cab recreates the classic look and tones of yesteryear.
Marshall 1960TV Cabinet Features:
- Angled front
- 4 - 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
- Original grille cloth
- 3" taller than standard 4x12 cabs
Marshall 1960TV Cabinet Specifications:
- Handles 100W
- 16 ohms
- 29-3/5“W x 35-1/2“H x 14-4/5“D
- 44 kgs.
| Hand Soldered, 120 Watt 4x12 Straight Front
To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.
The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.
The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.
Marshall 1960BHW Specifications:
- Cabinet Type: Base (straight, flat front)
- Speaker Type: G12H-30
- Speaker Configuration: 4 x 12 inches
- Power (RMS): 120 Watts
- Impedance: 16 Ohms
- Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
- Weight (kg): 36.4 (approx. 80 lbs.)
| Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.
| Power: |
120 Watts |
| Drivers: |
2 X 12? CELESTION VINTAGE 30 |
| Dimensions ( W x H x D ): |
53 X 78 X 38 cm |
| Weight: |
28 Kg |
| Info
150W 2x12" Mono / 75W + 75W Stereo Cabinet. | Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (Mono): 8
- Cabinet impedance (Stereo): 16/Speaker
- Power Rating (Mono): 120 W
- Power Rating (Stereo): 60/Speaker
- Cabinet weight without speakers: 15,6 kg
- Back: Closed
- Dimensions (WxDxH): 48x71x29 cm
- Front Grill: Fabric, detachable
- Speaker Mounting: 2 x 12" front mounted
Vintage 30
Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.
Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.
Specifications
- Nominal diameter: 12“, 305 mm
- Power Rating: 60 W
- Nominal impedance: 8 ohms
- Sensitivity: 100 dB
- Chassis type: Pressed steel
- Voice coil diameter: 1,75“, 44,5 mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 50 oz, 1,42 kg
- Frequency range: 70 - 5000 Hz
- Resonance frequency, Fs: 75 Hz
- DC resistance, Re: 7,3 ohms
|
Reviews
There are no reviews yet.