| Content |
Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:
- Front-mounted speakers
- Detachable grill
- Solid workmanship
- Speaker mount and quality check carried out in Germany
- Cabinet impedance (mono): 8 ohms
- Power Rating (mono): 50 W
- Cabinet weight without speakers: 12 kg
- Back: Open
- Dimensions (W x D x H): 58 x 29 x 45 cm
- Front Grill: detachable
- Speaker Mounting: 1x12" front mounted
CANNABIS REX™
Coloration : Clean and full, with lots of body and sparkle. Smokey smooth with high-end definition
Genre : Country, Jazz, Classical
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 50 W / Music Program N/A
- Resonance 96 Hz
- Usable Frequency Range 70 Hz - 5 kHz
- Sensitivity 102
- Magnet Weight 38 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 1.75“, 44.5 mm
| Marshall 1960TV 100W 4x12'' Guitar Speaker Cabinet
Invest in that fat sound!
The Marshall 1960TV Cabinet has an angled front; 4 - 12" Greenback speakers; and a warmer, thicker sound than the 1960A. This 100W, mono, 16-ohm cabinet is 3 inches taller than a standard 1960A 4x12 cabinet which results in well defined mid range and a lowered resonant frequency for more prominent lows. The 25W Greenbacks are less in your face than the 75W Celestions in the 1960A. Although not a reissue it was never offered in the past this cab recreates the classic look and tones of yesteryear.
Marshall 1960TV Cabinet Features:
- Angled front
- 4 - 12" 25W Greenback speakers for warmer, thicker sound than the 1960A
- Original grille cloth
- 3" taller than standard 4x12 cabs
Marshall 1960TV Cabinet Specifications:
- Handles 100W
- 16 ohms
- 29-3/5“W x 35-1/2“H x 14-4/5“D
- 44 kgs.
| Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.
| Power: |
120 Watts |
| Drivers: |
2 X 12? CELESTION VINTAGE 30 |
| Dimensions ( W x H x D ): |
53 X 78 X 38 cm |
| Weight: |
28 Kg |
| The PPC112 is one of the most popular 1x12 cabinets on the market today, and with good reason. Its closed-back, 18mm birch plywood enclosure is slightly bigger than a conventional 1x12. This gives the PPC112 a greater internal volume for a fatter tone with excellent projection. Housing a single Celestion Vintage 30 speaker, the cabinet also features our unique skid runners on the base to acoustically couple the cabinets to the stage to improve low end responsiveness. For lower wattage heads like our Terror Series or the OR15, the PPC112 is an excellent choice. | Marshall MF-280A 280W Guitar Speaker Cabinet
The MF280 (280W) and MF400 (400W) cabinets are specially engineered to reproduce the balanced mid range and huge bottom end that are a pre-requisite for extreme hard rock and nu-metal sounds, these cabinets feature:
- Sonically optimised Celestion loudspeaker designs
- Pro-gauge internal wiring
- Increased internal volume
- Metal logo and piping
In keeping with all legendary Marshall cabinets the MF 4x12" cabinets are not only ready for the sonic demands of a high performance head like the MF350, but also the extreme physical abuse they may receive on the road.
We recommend the MF280A (angled) and B (base) for full stack operation and the MF400A or B for half stack operation.
Stack versus Half Stack:
The MODE FOUR cabinets can be used either as a full stack (two cabinets) or half stack (one cabinet) configuration. The rig you choose is a matter of personal taste and as always when it comes to sound we recommend you try both to see which suits your style best. Below is a guide to the major attributes of each:
Full Stack:
Enhanced on stage spread. More 'cut through' due to accentuated treble and high mids. Iconic stage presence.
Half Stack:
More controllable spread of sound on stage (especially base type) Convenient and portable.
Half Stack Options:
Whether you choose an angled or base half stack configuration is a personal choice between the different tonal qualities of each set up.
The MF400A (angled) is, in keeping with other angled 4x12" cabinets, tonally more aggressive than the base option. The angled cabinet is the usual choice for those who want a more prominent upper mid and treble response that really cuts through in a live situation.
Alternatively, the MF400B (base) delivers a more even mid range with less spread of the aggressive treble response. Marshall 4x12" base cabinets are more often used by professionals as they have a more focused bottom end and a smoother mid range and treble response. They are often easier to deal with in terms of sound reinforcement and monitoring in a live situation | The Marshall 1936V Guitar Speaker Cabinet features 2x12" Celestion G12 Vintage Speakers capable of handling up 140 Watts of power!
The Marshall 1936V Guitar Speaker Cabinet offers mono or stereo options. The Marshall 1936V is perfect for use as an extension cabinet for Marshall combos and it's depth means it can also support a full-sized Marshall head.
- Base Cabinet Type
- 2x12" Celestion G12 Vintage Speakers
- 140 Watts (RMS)
- Selectable Mono/ Stereo
- Impedance Mono: 8 Ohms
- Impedance Stereo: 16 Ohms
- Dimensions (mm) : 750x600x310
- Weight (Kg) : 24.6
|
Reviews
There are no reviews yet.