PALMER AUDIO PEABI MI EABI – Balanced Line Input Switch

64.48 incl. GR VAT

Available on backorder

EAN: 4049521133107
Installments calculation
CompareAdd to wishlist Submit Better Price
 User’s manual [1,27 MB] The Palmer PEABI is more than a simple switcher for two sources; simultaneously, the PEABI also handles level adjustment for various sources. Whether microphone or line signal, the PEABI toggles silently between the two inputs and thus permits fast and simple comparison between signals or connection of various sources to one input. […]

 

Read more

 User’s manual [1,27 MB]

The Palmer PEABI is more than a simple switcher for two sources; simultaneously, the PEABI also handles level adjustment for various sources. Whether microphone or line signal, the PEABI toggles silently between the two inputs and thus permits fast and simple comparison between signals or connection of various sources to one input. Three slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both inputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. A red LED clearly indicates which input is currently active. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABI’s strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is required to power the LED.

Technical Specifications

  • Product type: switcher
  • Type: passive
  • Switch function: Input switcher
  • Number of channels: 2
  • Number of Inputs: 2
  • Input connections: XLR
  • Number of outputs: 1
  • Output connections: XLR
  • Outputs transformer balanced: no
  • Controls: Groundlift, Input PAD
  • Indicators: Channel number
  • Power Supply: 9-V block battery
  • Case Material: Sheet steel
  • Case surface: Powder coated
  • Dimensions (W x H x D): 100 mm x 60 mm x 120 mm
Weight 0.69 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PEABI MI EABI – Balanced Line Input Switch”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PEABI MI EABI - Balanced Line Input Switch removeDIGITECH DOD-MINIEXP Mini Expression Pedal removeBOSS AB-2 FOOTSWITCH 2-WAY SELECTOR 2 INPUT/2 OUTPUT removePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeMARSHALL PEDL-90003 1 way foot-switch removeBLACKSTAR FS-12 Footswitch remove
NamePALMER AUDIO PEABI MI EABI - Balanced Line Input Switch removeDIGITECH DOD-MINIEXP Mini Expression Pedal removeBOSS AB-2 FOOTSWITCH 2-WAY SELECTOR 2 INPUT/2 OUTPUT removePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeMARSHALL PEDL-90003 1 way foot-switch removeBLACKSTAR FS-12 Footswitch remove
Image
SKUPEABIDOD-MINIEXP689.ROL.106PTINOSPEDL-90003G30BS00002
Rating
Price 64.48 incl. GR VAT 110.35 incl. GR VAT 48.00 incl. GR VAT 258.77 incl. GR VAT 37.04 incl. GR VAT 79.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

 User's manual [1,27 MB]

The Palmer PEABI is more than a simple switcher for two sources; simultaneously, the PEABI also handles level adjustment for various sources. Whether microphone or line signal, the PEABI toggles silently between the two inputs and thus permits fast and simple comparison between signals or connection of various sources to one input. Three slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both inputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. A red LED clearly indicates which input is currently active. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABI's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is required to power the LED.

Technical Specifications
  • Product type: switcher
  • Type: passive
  • Switch function: Input switcher
  • Number of channels: 2
  • Number of Inputs: 2
  • Input connections: XLR
  • Number of outputs: 1
  • Output connections: XLR
  • Outputs transformer balanced: no
  • Controls: Groundlift, Input PAD
  • Indicators: Channel number
  • Power Supply: 9-V block battery
  • Case Material: Sheet steel
  • Case surface: Powder coated
  • Dimensions (W x H x D): 100 mm x 60 mm x 120 mm

The new passive DOD Mini Expression Pedal is just the right size for your pedal board, and your wallet. Rugged all-steel construction and gear drive means that there are no strings to break. Despite its compact form factor it is designed to have the same feel and throw as pedals that are twice its size (and price).

The BOSS AB-2 is a 2-way selector that makes changing inputs or outputs easy. One stomp is all it takes to instantly switch between two guitars, change amplifiers or switch between an amp and tuner. Rock-solid BOSS construction ensures the AB-2 will stand the test of time.

  • Affordable A/B selector with 1-click operation and silent switching
  • 2-way selector for using A/B input with one output, or vice-versa
  • Instantly change guitars, amplifiers or switch between an amp and tuner


Nominal Input Level-20 dBu
Nominal output Level-20 dBu
ControlPedal
IndicatorsA (red), B (yellow)
ConnectorsA jack, B jack, IN/OUT jack
Current Draw 5 mA or less
* Expected battery life under continuous use: Carbon: 100 hours
* This figure will vary depending on the actual conditions of use.
Power SupplyDry Battery [R03/LR03 (AAA) type] x 2
AccessoriesOwner's Manual, Dry Battery [R03/LR03 (AAA) type] x 2, Number Sticker
Size and Weight
Width
96 mm3-13/16 inches
Depth
90 mm3-9/16 inches
Height
43 mm1-3/4 inches
Weight
240 g0 lbs. 9 oz.

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 


  • Function on/off
  • Without LED
  • 5m cable
  • Screwed steel housing
  • Kink protection and cable feed-through
  • Mono jack
  • “Channel" label
  • Suitable for all amplifiers with simple on/off switch
  • Dimensions: 84 x 45 x 112 mm
  • Compatible with: Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
Dimensions 84 x 45 x 112 mm
Compatible with Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
LED Display No
Connector Jack
Number of Buttons / Switches 1
Function of Buttons / Switches Switch
Number Of Pedals 0
The FS-12 is a multi-function footcontroller in a compact, low profile, durable aluminium body that allows access to all 36 patches of the ID:CORE 100 / ID:CORE 150. The large, clear dot matrix display ensures easy visibility for the fully chromatic tuner and current patch details. Two user-configurable function switches provide control for:
  • Modulation, Delay and Reverb effects on/off
  • Modulation and Delay tap tempo
  • Full Looper functionality
  • Effects Loop on/off
  • Super Widestereo on/off
  • Noise Gate on/off
Weight0.69 kg0.50 kg0.24 kg1.60 kg0.51 kg0.66 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.69 kg
Weight 0.50 kg
Weight 0.24 kg
Weight 1.60 kg
Weight 0.51 kg
Weight 0.66 kg