PALMER AUDIO PEABO MI EABO – Balanced Line Output Switch

69.00 incl. GR VAT

Available on backorder

EAN: 4049521133091
Installments calculation
CompareAdd to wishlist Submit Better Price
The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs. Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private. Two different […]

 

Read more

The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a “telephone effect” or more Hall. Run both outputs of the PEABO to two channels of the mixing desk – now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.

Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum.

Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board.

The PEABO’s strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.

 

Weight 0.64 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PEABO MI EABO – Balanced Line Output Switch”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removeMARSHALL PEDL-90003 1 way foot-switch removePALMER AUDIO PEDMS MI DMS - Dynamic Mic Switcher removeMARSHALL PEDL-10021 5-Switch Foot Controller Marshall Amp removeVOX V860 VOLUME PEDAL removeELECTRO-HARMONIX Nano Switchblade remove
NamePALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removeMARSHALL PEDL-90003 1 way foot-switch removePALMER AUDIO PEDMS MI DMS - Dynamic Mic Switcher removeMARSHALL PEDL-10021 5-Switch Foot Controller Marshall Amp removeVOX V860 VOLUME PEDAL removeELECTRO-HARMONIX Nano Switchblade remove
Image
SKUPEABOPEDL-90003PEDMSPEDL-10021V860 VOLUME PEDALG05EH00033
Rating
Price 69.00 incl. GR VAT 37.04 incl. GR VAT 55.89 incl. GR VAT 52.00 incl. GR VAT 96.23 incl. GR VAT42.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

In stock

In stock

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderIn stockIn stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a "telephone effect" or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.
Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABO's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.  
  • Function on/off
  • Without LED
  • 5m cable
  • Screwed steel housing
  • Kink protection and cable feed-through
  • Mono jack
  • “Channel" label
  • Suitable for all amplifiers with simple on/off switch
  • Dimensions: 84 x 45 x 112 mm
  • Compatible with: Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
Dimensions 84 x 45 x 112 mm
Compatible with Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
LED Display No
Connector Jack
Number of Buttons / Switches 1
Function of Buttons / Switches Switch
Number Of Pedals 0
With the Palmer DMS (Dynamic Mic Switcher) you can switch a dynamic microphone between two inputs. The Palmer DMS Switcher is a passive unit and is exclusively for dynamic microphones. The switch on the DMS is momentary. The range of applications is vast:
  • Switch your vocal mic between the FOH mixer and the monitor mixer - this will allow you to talk exclusively to the band or the monitor mixing engineer.
  • Sound variation. Send the two outputs of the DMS to two channels of the FOH mixer, adjust the channels differently (for example, adjust the EQ to get a telephone effect). This will allow you to switch between two microphone sounds on stage at your own leisure.
  • You can use the DMS to switch the microphone between two different rooms/zones
 
The Marshall PEDL-10021 5-way LED foot controller can be used of any of the TSL Series Amplifiers. The Marshall TSL Foot Controller switches between channels, and can also be used as an on/off control for the Reverb and Effects loop. A must have for any gigging guitarist. LED lights for dark stages. 5 way selection controller. Some of the TSL Range already include footswitches.

The V860 represents a new standard in guitar volume pedals. It\'s a reimaging of the classic VOX pedal design exemplified by its well-known wah pedals. The stylish aluminum body features a blasted and anodized finish that is both tough and classy. The pedal mechanism uses gears with a high tooth count, ensuring durability and smooth operation. The components are completely hand-wired, minimizing any change in the tonal character.

Switch your signal between two different amplifiers, two different pedal boards or two different speaker cabinets. Flexible channel switching built into a compact die-cast case.

Weight0.64 kg0.51 kg0.65 kg4.00 kg1.30 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.64 kg
Weight 0.51 kg
Weight 0.65 kg
Weight 4.00 kg
Weight 1.30 kg
Weight 1.00 kg