| Content | The PECHOR is an easy to use but velvety sounding Chorus effect. With only three controllers Rate, Depth and Intensity you will easily and quickly find the sound you're looking for!
Technical Specifications
- Input impedance: 470 K ohms
- Output impedance: 100 k ohms
- Residual noise: -85 dB (all controls centered)
- Controls: RATE, DEPTH, INTENSITY
- Indicator: LED
- Connectors: IN, OUT, DC input (9 V)
- Footswitch: true bybass
- Power requirements: 9 V PP3 or 9 V DC supply (optional)
- Power consumption: 25 mA (9 V DC)
- Dimensions (W x H x D): 120 mm x 120 mm x 56 mm
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
|
Following up on the success and rave reviews of our newly released Vocalist® products, we decided to make a pedal with the same cool features but specifically designed for the guitarist. With our exclusive musIQ™ technology we were able to combine the lightning-fast natural sounding harmony generation made famous by the Vocalist pedals, and fuse it with the demands of professional guitarists everywhere. HarmonyMan™ is the world's first guitar pedal that generates harmonies based on your chord progression. It features four different types of pitch shifting depending on which of the 42 different voices are selected. Combine up to two distinct voices in any combination to accompany the input signal: a 3rd or 5th above or below, an octave up, two octaves below, 24 semitones and 4 detune variations. Simply play the songs you know and love, and when the spotlight cues your solo, hit the harmony footswitch to get amazing multi-part guitar harmonies! Features - Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
- 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
- Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
- Edit, store and recall 4 memory presets.
- Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
- Built-in guitar tuner
- Pre-harmony Distortion loop
- Features
- Shifting Modes
- Configurations
- Specifications
Features - Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
- 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
- Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
- Edit, store and recall 4 memory presets.
- Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
- Built-in guitar tuner
- Pre-harmony Distortion loop
Shifting Modes Triad Center Shifting Mode Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition. Scalic Shifting Mode Creates musically correct harmonies with various shifting depending on the harmony key. Fixed (chromatic) Shifting Mode Applies fixed harmony intervals to all notes with the fixed number of semitones selected. Detune Shifting Mode Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously. Configuration Electric Guitar With Pre-Harmony Distortion and Stereo Amplifiers Add distortion to your lead and harmonies.
![Config 1]() The Side-Chain Using Two Guitars with Pre-Harmony Distortion This configuration is used when the 2nd guitar is the source signal.
![Config 2]() Specifications Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch
|
- Experience true analog delay and vintage slap-back echo that rivals any tape delay
- This BEHRINGER product has been designed to compete head to head with leading products on the market
- Vintage BBDs produce up to 300 ms of delay and advanced noise reduction circuit keeps your signal clean
- Dedicated Intensity, Echo and Repeat Rate controls for awesome sound shaping
- Blue status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- First-class electronic On/Off switch for highest signal integrity in bypass mode
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
Analog at its Finest
Though digital sound technology constantly evolves, nothing sounds quite like the "old-school” analog Bucket Brigade-style delay you get when you step on the VD400. With its dedicated REPEAT RATE, INTENSITY and ECHO dials, this amazing little stomp box evokes the spirits of some of rock and rollʼs most legendary heroes, and provides up to 300 milliseconds of true analog delay. Every type of classic delay, from a deep-space whisper, to an interplanetary battle cry—is at your command.
Easy to Operate
The bright blue LED tells you when the Vintage Delay is activated (and serves as a beacon for other time travelers), and the top-quality on/off switch maintains excellent signal integrity in bypass mode. You can power the VD400 with either a 9 V battery or our PSU-SB DC power supply (not included).
Like a Trip Back in Time… The VINTAGE DELAY VD400 is like a snapshot pulled right out of time—and its low, low price tag will have you reminiscing about how much you miss those "good-old” days. Visit your BEHRINGER dealer without delay, delay, delay... | Features twin modes for an expanded range of distortion—taking you from blues-rock rhythms to searing leads at the press of a pedal or twist of a knob.
The SD-1 Super OverDrive pedal produces the warm, natural distortion of an overdriven tube amplifier while maintaining the subtle nuances of a player's picking technique. This is one of BOSS' more subtle and smooth overdrive pedals, perfect for blues and rock.
- Compact overdrive pedal with warm, smooth overdriven sounds
- Unique asymmetric overdrive circuitry for a classic, natural tube amp growl
- Tone control provides precise adjustment of drive sound
- BOSS 5-year warranty
| Input Impedance |
1 M ohms |
| Output Impedance |
10 k ohms or greater |
| Equivalent Input Noise Level |
–120 dBu or less (IHF-A, Typ.) |
| Connectors |
INPUT Jack, OUTPUT Jack, REMOTE Jack, AC Adaptor Jack |
| Power Supply |
DC 9 V: Dry Battery 9 V type, AC Adaptor |
| Current Draw |
12 mA (DC 9 V) |
| Accessories |
Dry Battery 9 V type (6F22/9 V) |
| Option |
AC Adaptor (PSA-Series) |
| Size and Weight ( incl. battery ) |
| Width |
|
| Depth |
|
| Height |
|
| Weight |
|
|
Reviews
There are no reviews yet.