Content |
The PECOMP Compressor controls the dynamics of your guitar signal for increased punch and sustain. The PECOMP features a low-noise circuit that is absolutely free from distortion.
Technical Specifications - Input impedance: 1 M ohms
- Output impedance: 100 K ohms
- Residual noise: -85 dB (all controls centered)
- Controls: LEVEL, ATTACK, SUSTAIN
- Indicator: LED
- Connectors: IN, OUT, DC input (9 V)
- Footswitch: true bybass
- Power requirements: 9 V PP3 or 9 V DC supply (optional)
- Power consumption: 12 mA (9 V DC)
- Dimensions (W x H x D): 120 mm x 60 mm x 140 mm
| Studio Quality Effects at Your Feet
Top recording studios worldwide use Eventide effects on hit after hit. TimeFactor includes Eventide's best delay effects from the past 36 years without compromising quality OR flexibility.
Flexibility Built-In
Plug-and-play expression pedal control of wet/dry mix or any combination of parameters. Control program changes and vary parameters continuously via MIDI. Supports instrument or line level inputs and outputs. Plays well with others; adapts seamlessly with a wide variety of amps and other foot pedals.
Obsolescence is so 20th Century
Easy to upgrade; download new software from the Internet and install via USB.
Features
- 10 Stereo or Mono Delay effects
- Digital Delay
- Vintage Delay
- Tape Echo
- Mod Delay
- Ducked Delay
- Band Delay
- Filter Pong
- MultiTap
- Reverse
- Looper
- Studio Quality Sound
- Instant Program Change
- Real-time control with 10 knobs, MIDI or expression pedal
- Tap Tempo and MIDI Clock Sync
- 40 User Presets, unlimited through MIDI
- True Analog Bypass
- Rugged cast metal construction
- Metal footswitches for instant Preset access
- Mono or Stereo operation
- Guitar or Line Level Inputs and Outputs
SPECIFICATIONS:
Analog Input/Output |
Input impedance |
500K ohms |
Output Impedance |
470 ohms |
Recommended Load Impedance |
10K ohms or greater |
Connectors |
Input 1 (mono) |
¼ inch mono phone jack |
Input 2 |
¼ inch mono phone jack |
Output 1 (mono) |
¼ inch mono phone jack |
Output 2 |
¼ inch mono phone jack |
Expression Pedal |
¼ inch mono phone jack |
Aux Switch |
¼ inch stereo phone jack |
USB |
Type B Socket. Use 2.0 cables only. |
MIDI In |
Five pin DIN (Female) |
MIDI Out/Thru |
Five pin DIN (Female) |
AC Adapter Jack |
Power Supply included (see below) |
Physical |
Power |
9 VDC, 1200 mA, Tip hot (+) |
Dimensions |
English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm |
Weight |
2.15 lbs, 1kG |
|
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
- Classic "blues" guitar tones with tube amp simulation
- Warm distortion and overdrive
- Responds to nuance and volume changes
- AC adaptor or 9V battery operation
- BOSS 5-year warranty
| The FZ-5 is a modern pedal built for the modern guitarist, but the sounds you can get from the FZ-5 are pure retro. Looking back at the glorious rock sounds of the ʼ60s and ʼ70s, the FZ-5 recreates its vintage fuzz through BOSS state-of-the-art COSM technology. Recall the fuzz-filled flavors of classic pedals such as the Maestro FZ-1A, Fuzz Face, and Octavia pedals, and kick ʼem into overdrive with the FZ-5ʼs Boost knob. BOSS' proprietary COSM technology allows guitar players to recreate classic fuzz BOOST control for more aggressive tone. The FZ-5 is the perfect weapon for players wanting to beef up their rigs with classic retro fuzz artillery.
- Vintage sounds inspired by famous fuzz pedals of the ʼ60s and ʼ70s
- Uses advanced COSM technology to recreate classic fuzz
- BOOST control for more aggressive tone
- Road-tough BOSS metal construction
Nominal Input Level |
-20 dBu |
Input Impedance |
1 M ohm |
Nominal Output Level |
-20 dBu |
Output Impedance |
1 k ohm |
Recommended Load Impedance |
10 k ohms or greater |
Controls |
Pedal switch, LEVEL knob, FUZZ knob, MODE knob |
Indicator |
CHECK indicator (Serves also as battery check indicator) |
Connectors |
INPUT jack, OUTPUT jack, AC adaptor jack (DC 9 V) |
Power Supply |
DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional) |
Current Draw |
36 mA (DC 9 V) |
Expected battery life under continuous use |
Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use. |
Accessories |
Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), MODE sticker, Dry Battery 006P/9V (6LR61) |
Options |
AC Adaptor (PSA series) |
Size and Weight |
Width |
|
Depth |
|
Height |
|
Weight |
|
| Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS 5-year warranty
|
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
- Produces extreme, low-end distortion for modern metal and hard rock
- Gain Boost circuit creates huge distortion and sustain regardless of level
- New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
- Tone control adjusts balance between high and low frequencies
- BOSS 5-year warranty
|
Reviews
There are no reviews yet.