PALMER AUDIO PEDMS MI DMS – Dynamic Mic Switcher

55.89 incl. GR VAT

Available on backorder

EAN: 4049521115356
Installments calculation
CompareAdd to wishlist Submit Better Price
With the Palmer DMS (Dynamic Mic Switcher) you can switch a dynamic microphone between two inputs. The Palmer DMS Switcher is a passive unit and is exclusively for dynamic microphones. The switch on the DMS is momentary. The range of applications is vast: Switch your vocal mic between the FOH mixer and the monitor mixer […]

 

Read more

With the Palmer DMS (Dynamic Mic Switcher) you can switch a dynamic microphone between two inputs.

The Palmer DMS Switcher is a passive unit and is exclusively for dynamic microphones. The switch on the DMS is momentary.

The range of applications is vast:

  • Switch your vocal mic between the FOH mixer and the monitor mixer – this will allow you to talk exclusively to the band or the monitor mixing engineer.
  • Sound variation. Send the two outputs of the DMS to two channels of the FOH mixer, adjust the channels differently (for example, adjust the EQ to get a telephone effect). This will allow you to switch between two microphone sounds on stage at your own leisure.
  • You can use the DMS to switch the microphone between two different rooms/zones

 

Weight 0.65 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER AUDIO PEDMS MI DMS – Dynamic Mic Switcher”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER AUDIO PEDMS MI DMS - Dynamic Mic Switcher removeROCKTRON MIDI XCHANGE MIDI FOOTCONTROLLER removePALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removePALMER PTRINITY MI T-Series - Instrument Selector removeLINE 6 FBV-2 Foot Controller remove
NamePALMER AUDIO PEDMS MI DMS - Dynamic Mic Switcher removeROCKTRON MIDI XCHANGE MIDI FOOTCONTROLLER removePALMER AUDIO PEABO MI EABO - Balanced Line Output Switch removePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removePALMER PTRINITY MI T-Series - Instrument Selector removeLINE 6 FBV-2 Foot Controller remove
Image
SKUPEDMSMIDI XCHANGEPEABOPTINOSPTRINITYG30LN00016
Rating
Price 55.89 incl. GR VAT 156.30 incl. GR VAT 69.00 incl. GR VAT 258.77 incl. GR VAT 192.55 incl. GR VAT 40.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentWith the Palmer DMS (Dynamic Mic Switcher) you can switch a dynamic microphone between two inputs. The Palmer DMS Switcher is a passive unit and is exclusively for dynamic microphones. The switch on the DMS is momentary. The range of applications is vast:
  • Switch your vocal mic between the FOH mixer and the monitor mixer - this will allow you to talk exclusively to the band or the monitor mixing engineer.
  • Sound variation. Send the two outputs of the DMS to two channels of the FOH mixer, adjust the channels differently (for example, adjust the EQ to get a telephone effect). This will allow you to switch between two microphone sounds on stage at your own leisure.
  • You can use the DMS to switch the microphone between two different rooms/zones
 
The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a "telephone effect" or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.
Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABO's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.  

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 


The Palmer TRINITY is a 3 into 1 instrument selector for changing guitars without unplugging and the associated noise. Sturdy footswitches select the input channels with individual buffer amps providing up to 12 dB boost to balance instrument levels without changing the amp settings. In addition, the Trinity features a dedicated tuner output.

 


Don't feel like carrying around a full-sized foot controller? Now you don't have to! The FBV2™ lets you scroll through the first bank of four presets and is small and light enough to fit in your gig bag. With its ultra-reliable switches and aluminum case, the FBV2 can take all the abuse you can throw at it.

  Specifications
  • Scrolls through Channels A,B,C, & D
  • Self-powered though the locking cable
  FBV2 is compatible with
  • Spider Valve
  • Spider II
  • Spider III
  • Flextone III
  • Vetta
  • Vetta II
  • HD 147
  • Pod 2.0
  • Pod XT
  • Pod XT Pro
  • Bass Pod XT
  • Bass Pod XT Pro
  *FBV2 is not compatible with Spider II 15 or Spider III 15.

**FBV2 is only compatible with POD 2.0 units with pedal jacks labelled 'FBV Pedal.' It is not compatible with older units which have pedal jacks labelled simply 'Pedal.'
Weight0.65 kg0.50 kg0.64 kg1.60 kg0.95 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.65 kg
Weight 0.50 kg
Weight 0.64 kg
Weight 1.60 kg
Weight 0.95 kg
Weight 1.00 kg