| Content |
- Wide range of authentic tube amplifier tones
- Selectable amplifier styles, gain structure and mic position emulation
- Master drive, level, bass and treble controls
- Superior signal-to-noise ratio
- Ideal for direct recording
- Doubles as distortion pedal, practice amp and DI box
- Pure analog device
In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2\'s hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.
Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Product type
Guitar Amplifiers
Technology
solid state
Power
n.a. W
Inputs
1
Input connectors
6.3 mm jack
Input impedance
1 M Ohm(s)
Outputs
3
Output connectors
3.5 mm jack , 6.3 mm jack , XLR
Output impedance
510 Ohm(s)
Channels
1
Indicators
on/off
Controls
amp select , Bass , Drive , Gain , ground lift , level , mic position , Mode , Treble
FX loop
no
Operating voltage
9 V block , 9 V DC power supply
Cabinet material
die-cast aluminium
Width
100 mm
Depth
100 mm
Height
55 mm
Weight
0,36 kg | The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
The MD-2 Mega distortion takes the bottom-heavy distortion sounds heard in today's new-school metal and pushes it to the extreme. The secret is a special dual-stage distortion circuit with an added gain boost-plus new Bottom and Tone controls--for crushing distortion with massive low end. Take your distortion into the future with the MD-2.
- Produces extreme, low-end distortion for modern metal and hard rock
- Gain Boost circuit creates huge distortion and sustain regardless of level
- New Bottom control for bottom-heavy distortion matched to 6- or 7-string guitars
- Tone control adjusts balance between high and low frequencies
- BOSS 5-year warranty
|
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
| Input Impedance | 1 M ohms |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -93 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 22 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Option | AC Adaptor (PSA-Series) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
The OS-2 gives players a choice of overdrive or distortion or lets them combine both--all in a single compact pedal. Its distortion maintains the subtle nuances of single-coil guitar pickups.
- Flexible distortion pedal capable of producing blended overdrive/distortion sounds
- Provides both "over-the-top" distortion sounds and less extreme overdrive tones for rhythm playing
- Includes Level, Tone, Drive and Color controls for precise tonal shaping
- BOSS 5-year warranty
|
Features The BD-2 Blues Driver delivers the creamy, yet crunchy sound associated with great blues guitar. This popular pedal provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps.
- Classic "blues" guitar tones with tube amp simulation
- Warm distortion and overdrive
- Responds to nuance and volume changes
- AC adaptor or 9V battery operation
- BOSS 5-year warranty
|
Reviews
There are no reviews yet.