PALMER PFAT50H MI FAT 50 H – Tube Guitar Head 50 W

Discontinued

680.49 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Palmer FAT50 Tube Series amplifiers are for the guitarist in search of the distinct and highly individual sounds only a true all-tube design can produce. Full of character, yet straightforward and uncluttered Palmer amps are back – with tons of tone, high quality components, rugged construction and attractive cosmectics to fulfil the demands of discerning […]

 

Read more

Palmer FAT50 Tube Series amplifiers are for the guitarist in search of the distinct and highly individual sounds only a true all-tube design can produce. Full of character, yet straightforward and uncluttered Palmer amps are back – with tons of tone, high quality components, rugged construction and attractive cosmectics to fulfil the demands of discerning players.

The no-compromise FAT50 design incorporates a rainbow of sounds with punch and definition – from subtle crunch to maximum saturation, and a lively and dynamic clean tone with extended headroom.The FAT50ʽs High Gain circuit provides massive overdrive for a comprehensive set list of quintessential riffs and classic lead lines.

In addition to their outstanding sound quality Palmer amps offer unsurpassed reliability on stage and in the studio. Premium quality tubes are used throughout for safe and stable operation. With two footswitchablemaster volumes and a solid 50 Watts of true tube power FAT50 amps are built to be heard!

Technical Data:

Preamp Section

  • V1, V2: ECC83/12AX7A highgrade
  • V3, V4: ECC83/12AX7A selected

Power-Amp Section

  • V5, V6: 5881 (6L6GC) matched set
  • Output Power: 50 Watt an 8 oder 16 Ohm

General

  • Mains Voltage: 230 V~ +/-10%
  • Max. Power consumption: 150 W
  • Power consumption in Standby mode: 42 W
  • Dimensions (W x H x D): 580 x 280 x 270 mm
Weight 16.00 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER PFAT50H MI FAT 50 H – Tube Guitar Head 50 W”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER PFAT50H MI FAT 50 H - Tube Guitar Head 50 W removePALMER AUDIO PEINS MI EINS - Full Tube Guitar Amplifier 1W removeMARSHALL 4100 Guitar head amplifier JCM 900 100W removeMARSHALL 1987X-01 50W Guitar Amplifier removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removeMARSHALL JMD100 100W Head Guitar Amplifier remove
NamePALMER PFAT50H MI FAT 50 H - Tube Guitar Head 50 W removePALMER AUDIO PEINS MI EINS - Full Tube Guitar Amplifier 1W removeMARSHALL 4100 Guitar head amplifier JCM 900 100W removeMARSHALL 1987X-01 50W Guitar Amplifier removeBUGERA 6262 INFINIUM Guitar Amplifier with Reverb and INFINIUM Tube Life Multiplier removeMARSHALL JMD100 100W Head Guitar Amplifier remove
Image
SKUPFAT50HPEINS41001987X-01E005884JMD100
Rating
Price 680.49 incl. GR VAT 227.94 incl. GR VAT 1,418.00 incl. GR VAT 1,566.00 incl. GR VAT 696.00 incl. GR VAT 688.99 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Palmer FAT50 Tube Series amplifiers are for the guitarist in search of the distinct and highly individual sounds only a true all-tube design can produce. Full of character, yet straightforward and uncluttered Palmer amps are back - with tons of tone, high quality components, rugged construction and attractive cosmectics to fulfil the demands of discerning players.

The no-compromise FAT50 design incorporates a rainbow of sounds with punch and definition - from subtle crunch to maximum saturation, and a lively and dynamic clean tone with extended headroom.The FAT50ʽs High Gain circuit provides massive overdrive for a comprehensive set list of quintessential riffs and classic lead lines.

In addition to their outstanding sound quality Palmer amps offer unsurpassed reliability on stage and in the studio. Premium quality tubes are used throughout for safe and stable operation. With two footswitchablemaster volumes and a solid 50 Watts of true tube power FAT50 amps are built to be heard!

Technical Data:

Preamp Section

  • V1, V2: ECC83/12AX7A highgrade
  • V3, V4: ECC83/12AX7A selected

Power-Amp Section

  • V5, V6: 5881 (6L6GC) matched set
  • Output Power: 50 Watt an 8 oder 16 Ohm

General

  • Mains Voltage: 230 V~ +/-10%
  • Max. Power consumption: 150 W
  • Power consumption in Standby mode: 42 W
  • Dimensions (W x H x D): 580 x 280 x 270 mm

Palmer EINS - Amazingly versatile!

Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers.Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox aspeaker does not need to be connected. Thanks to the unique "HiZ output” you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.

The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.

  • 1: V1:ECC83 - V2:ECC83: Quieter, distorts much faster, a little more gain, lead sound.
  • 2: V1:ECC83 - V2:ECC81: Louder than Variation "1“, quieter than the standard configuration, more gain, distorts a little more quickly.
  • 3: V1:ECC81 - V2:ECC82: Stays clean a little longer, a little more headroom, darker distortion sound.
  • 4: V1:ECC81 - V2:ECC83: The quietest configuration, distortion sets in a little later than with Variation "1“, distortion can be controlled very precisely.
  • Type: head
  • technology: Tube
  • class: A
  • power: 1 W
  • Inputs: 1
  • input connectors: 6.3 mm Jack
  • Input impedance: 1 M ohm
  • outputs: 4
  • output connectors: 6.3 mm Jack
  • output impedance: Speaker out: 8 & 16 Ohm, Simulated out: 4k, HiZ out: 3,3M ohm
  • Channels: 1
  • Indicators: Power
  • controls: Level, Tone
  • FX loop: no
  • Power supply: 230 VAC
  • Power consumption: 10 W
  • preamp tubes: ECC83
  • power amp tubes: ECC82
  • rectifier: solid state
  • cabinet material: sheet steel
  • Cabinet / Housing surface: powder coated / anodized
  • width: 206 mm
  • depth: 128 mm
  • height: 108 mm

Marshall 4100 100W Guitar Amplifier


Marshall 4100
With 4 - 5881 output tubes for 100W of room-shaking power, this head is made for nonstop heavy rockin?.




For total control, the 4100 has 2 channels, each with separate Gain, Master Volume, and Reverb controls. Channel A is voiced for anything from shimmering clean to raw crunch reminiscent of a JTM45. Channel B picks up where normal boost channels quit, generating supercharged distortion and ringing sustain. Other great features include 4-band rotary EQ, adjustable effects loop, and both normal and cab effect direct outs.

Marshall 1987X-01 50W Guitar Amplifier

Though the 50 Watt 1987X shares the same front and rear panel features as its big brother, the 1959 SLP, it does have its own distinct personality. Sweet warm singing sounds are packed into every nook and cranny of this great tone machine. As is the case with the 1959SLP, the 1987X has fittings and hardware as true to the originals as humanly possible, thus ensuring that authentic Marshall 'Vintage' look.

Highlights
Mix the two channels together by connecting a short, screened patch lead between the second input of Channel 1 and the first input of Channel 2. If you then plug your guitar into the first input of Channel 1, you can mix the different tonal characters of each channel for greater flexibility.

The Series Effects Loop features a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised. The Level Switch allows you match the loop to either stompboxes or rack units.

  • Output: 50 Watts
  • Pre-amp Tubes: 3 x ECC83
  • Power Amp Tubes: 2 x EL34
  • EQ: 3-Band
  • Presence Control

Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier

  • Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
  • 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
  • Revolutionary INFINIUM Tube Life Multiplier technology:
    • Extends the life of your amplifierʼs expensive power tubes up to 20 times
    • Provides incredible reliability and consistent tone over the complete lifespan of your tubes
    • No need for expensive matched tube sets
    • Allows you to mix and match any combination of compatible tube types and brands
    • Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
  • Integrated high-class reverb with dedicated Reverb control for each channel
  • Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
  • Classic Presence control per channel for efficient midrange sound shaping
  • Heavy-duty footswitch for Channel selection and FX Loop function included
  • Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
  • High-quality components and exceptionally rugged construction ensure long life

 

100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.

Features
  • Power rating: 100W
  • Preamp: Digital Natural Harmonic Technology
  • Power amp tubes: 4 x EL34
  • Preamp topologies: 16
  • Modulation effects: Chorus, Phaser, Flanger, Tremolo
  • Delay effects: Hi-Fi Analog, Tape, Multi
  • Reverb: Independent custom voiced
  • Midi Control: Midi in, Midi Thru
  • Stompware controller: supplied
  • Emulated line out: XLR
  • Headphone out: 1/4" jack
  • Line in: 1/4" jack
  • Preamp: 1/4" jack
  • Effects loop: Serial / Parallel -10dBV / +4dB with mix control
  • Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
Weight16.00 kg2.47 kg18.80 kg15.30 kg3.00 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 16.00 kg
Weight 2.47 kg
Weight 18.80 kg
Guitar Amp Watts

Weight 15.30 kg
Weight 3.00 kg
Weight 20.00 kg
Guitar Amp Watts