Palmer POCKET AMP BASS Portable Bass Preamp

161.46 incl. GR VAT

Available on backorder

EAN: 4049521206412
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Multi-purpose bass effects pedal and preamp
  • Works with any bass rig, power amp, mixing desk and as headphones amp
  • Pad switch for use with active and passive basses
  • Clean, overdrive and fuzz modes
  • Drive and saturation controls
  • 3-Band EQ with semi-parametric mid control
  • Vintage and modern cabinet simulations
  • Blend control for wet and dry signal mixing
  • 3-pin XLR for balanced DI, pre or post effect switchable
  • Footswitch-assignable thru (tuner) output
  • Insert, stereo line input and ground lift
  • Multi-purpose bass effects pedal and preamp
  • Works with any bass rig, power amp, mixing desk and as headphones amp
  • Pad switch for use with active and passive basses
  • Clean, overdrive and fuzz modes
  • Drive and saturation controls
  • 3-Band EQ with semi-parametric mid control
  • Vintage and modern cabinet simulations
  • Blend control for wet and dry signal mixing
  • 3-pin XLR for balanced DI, pre or post effect switchable
  • Footswitch-assignable thru (tuner) output
  • Insert, stereo line input and ground lift

 

Read more

Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.

The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift

Product type
Guitar Amplifiers

Technology
solid state

Inputs
2

Input connectors
6.3 mm jack

Input impedance
1 M Ohm(s)

Outputs
4

Output connectors
2 x 6.3 mm TS , 3.5 mm jack , XLR

Output impedance
TRS 10000 Ohm(s) , XLR 510 Ohm(s)

Channels
1

Indicators
on/off , peak , Signal

Controls
Bass , Drive , ground lift , highs , input pad , Mid , mid frequency , Mode , mute , Pre/Post , volume

FX loop
Yes

Operating voltage
9 V block , 9 V DC power supply

Cabinet material
Die-cast aluminum

Width
100 mm

Depth
100 mm

Height
55 mm

Weight
0,36 kg
Weight 0.40 kg

Reviews

There are no reviews yet.

Be the first to review “Palmer POCKET AMP BASS Portable Bass Preamp”

Your email address will not be published. Required fields are marked *

Quick Comparison

Palmer POCKET AMP BASS Portable Bass Preamp removeBEHRINGER FX600 DIGITAL MULTI-FX Pedal removeTC HELICON Voice Tone Harmony G XT Voice Processor removeLINE 6 Pod HD-500X Guitar Multieffect Pedal removeELECTRO-HARMONIX FCHOG2 removeELECTRO-HARMONIX E-Bow Plus remove
NamePalmer POCKET AMP BASS Portable Bass Preamp removeBEHRINGER FX600 DIGITAL MULTI-FX Pedal removeTC HELICON Voice Tone Harmony G XT Voice Processor removeLINE 6 Pod HD-500X Guitar Multieffect Pedal removeELECTRO-HARMONIX FCHOG2 removeELECTRO-HARMONIX E-Bow Plus remove
Image
SKUPEPAMPBASSE005296E008458G05LN00034G05EH00008G30EH00002
Rating
Price 161.46 incl. GR VAT 50.00 incl. GR VAT 256.00 incl. GR VAT 409.00 incl. GR VAT94.00 incl. GR VAT 120.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Multi-purpose bass effects pedal and preamp
  • Works with any bass rig, power amp, mixing desk and as headphones amp
  • Pad switch for use with active and passive basses
  • Clean, overdrive and fuzz modes
  • Drive and saturation controls
  • 3-Band EQ with semi-parametric mid control
  • Vintage and modern cabinet simulations
  • Blend control for wet and dry signal mixing
  • 3-pin XLR for balanced DI, pre or post effect switchable
  • Footswitch-assignable thru (tuner) output
  • Insert, stereo line input and ground lift
  • Ultimate digital multi-effects pedal comparable to state-of-the-art studio processors
  • 24-bit high-resolution stereo effects including Flanger, Chorus, Phaser, Delay, Tremolo and Pitch Shifter
  • 2 additional parameter controls to adjust delay time, flanger rate, etc.
  • Status LED for effect on/off and battery check
  • Behringer PSU-HSB-ALL DC power supply recommended (not included)
  • First-class electronic On/Off switch for highest signal integrity in bypass mode
  • Designed and engineered in Germany
ContentProviding extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that‘s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals. The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift
Product type
Guitar Amplifiers

Technology
solid state

Inputs
2

Input connectors
6.3 mm jack

Input impedance
1 M Ohm(s)

Outputs
4

Output connectors
2 x 6.3 mm TS , 3.5 mm jack , XLR

Output impedance
TRS 10000 Ohm(s) , XLR 510 Ohm(s)

Channels
1

Indicators
on/off , peak , Signal

Controls
Bass , Drive , ground lift , highs , input pad , Mid , mid frequency , Mode , mute , Pre/Post , volume

FX loop
Yes

Operating voltage
9 V block , 9 V DC power supply

Cabinet material
Die-cast aluminum

Width
100 mm

Depth
100 mm

Height
55 mm

Weight
0,36 kg
Studio effects processors sound really good, but they can be bulky, complicated and expensive. Now you can have all the power and great sound of studio-grade, stereo effects processing, thanks to the ultra-affordable and easy-to-use Digital Stereo Multi-FX FX600. This amazing little stompbox features a 24-bit, high-resolution stereo FX engine – and your choice of Flanger, Chorus, Phaser, Delay, Tremolo and Pitch Shifter effects.

Stellar Sound

Much like having a, studio full of state-of-the-art Flanger, Chorus, Phaser, Delay, Tremolo and Pitch Shifter FX processors at your disposal, the Digital Stereo Multi-FX FX600's mind-blowing 24-bit/40 kHz resolution turns your everyday riffs into 3-D epics that bring your performance alive. The possibilities are endless!

Delightfully Simple Operation

Just select one of the 6 effects via the dedicated FX knob, and then use the two Parameter dials to fine-tune the effect. The Level control determines how much of the effect is mixed with the original signal. The LED tells you when the FX600 is activated, and the top-quality on/off switch maintains incredible signal integrity in bypass mode. You can power your FX600 with the PSU-HSB-ALL DC power supply (not included).

Sound Value

It has never been so affordable to put a studio-full of awesome-sounding, stereo effects at your feet than with the Digital Stereo Multi-FX FX600. This one incredible pedal gives you a Flanger, Chorus, Phaser, Delay, Tremolo and Pitch Shifter – all in one! Check one out today at your local Behringer dealer, or get yours online.  

Kick your vocals into high gear with VoiceTone Harmony-G XT. With improved harmony technology and reverb from its big brother VoiceLive 2, Harmony-G XT will improve your tone and surround your voice with pro effects and vocal harmony.     New Features

A wealth of new features makes Harmony-G XT a better-sounding and easier-to-use vocal effect footpedal.

  • Improved NaturalPlay guitar-controlled harmony algorithm
  • Front-of-house quality reverb algorithm and selection of styles from VoiceLive 2
  • Selection of four overdub-style doubling effects with two more doubling voices available
  • Reworked FX presets offer even more utility across music styles
  • USB connection for easy software updates, tips, and preset backup using the included VoiceSupport applet
  • Adaptive harmony gate added to Tone for a cleaner mix
  • Easy manual selection of Scale & Key for singers without an instrument or horn players

Standard Features

All the features that made the original Harmony-G such a success.

  • Listens to guitar and voice to create correct harmony parts automatically
  • Tone switch smooths vocals with adaptive Live Engineer Effects
  • 18 combinations of reverb, delay and µmod shared by vocal and guitar input
  • 10 presets available, each with A/B options
  • Harmony interval selection includes 3rds and 5ths above and below, octave up and down, and the unique Bass interval
  • Stereo or mono configurable output
  • Clean, studio quality mic preamp with phantom power and XLR input
  • Guitar signal can be mixed in and share reverb or passed through to separate amplifier

POD® HD500 is the best-selling multi-effects floorboard*—and now POD HD500X gives you even more power to define your sound. Itʼs the ultimate tone palette, whether you want to re-create classics or go somewhere new. And thanks to HD technology, POD HD500X provides the depth, character and touch nuance to inspire your creativity in the studio or on stage. So if youʼve never experienced the flagship of the POD family, nowʼs the time to check out POD HD500X.

 

 

  • World-class collection of HD amps for unmatched depth and touch response
  • The most powerful combination of dynamic DSP and flexible routing options in its class, so you can define your sound
  • Assignable, pro-grade, backlit footswitches that you can see from anywhere on stage
  • The command center for any guitar setup including the Line 6 Dream Rig—the only system that can be virtually any rig

 

FEATURES
  • Extensive collection of award-winning HD amps for authentic tone and feel
  • 100+ studio and stomp effects—use up to eight simultaneously
  • Selectable speaker cabinets and mics
  • Unparalleled flexibility to craft your tones:
    • Dual signal paths
    • Multiple routing options
    • Dynamic DSP with more power for amps and effects
    • Stereo FX loop can be inserted anywhere in the signal chain
  • Professional-grade footswitches with bright LED rings for at-a-glance operation
  • Comprehensive I/O includes USB 2.0, MIDI, S/PDIF, balanced XLR outputs, integrated mic preamp and more
  • Variable input impedance
  • L6 LINK™ connection for integration and control of DT-series amplifiers and StageSource® series loudspeakers
  • VDI connection for integration and control of James Tyler® Variax® guitars
  • 512 user-writable preset locations
  • Eight set list banks
  • Assignable expression pedal controls amp and effect parameters
  • Integrated 48-second looper with dedicated footswitch
  • Built-in chromatic tuner Tap tempo
  • Professional-grade construction with bent metal chassis, chrome roll bar and die-cast expression pedal
  • Downloadable POD® HD500X software editor/patch librarian

 

Instant Recall! With the HOG2's myriad sounds, the HOG2 Foot Controller gives you easy access to up to 100 stored presets. Your entire show can be set up at the touch of a button. When recording you have access to complex sound transitions that can give your songs new depth and integrity.

E-Bow Plus - handheld electronic bow for guitar, replaces the pick in the right hand allowing the guitarist to mimic strings, horns, and woodwinds.

Weight0.40 kg0.50 kg1.00 kg5.00 kg1.00 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.40 kg
Weight 0.50 kg
Weight 1.00 kg
Weight 5.00 kg
Weight 1.00 kg
Weight 0.10 kg