| Content |
Palmer PWT 06 19" Multiple Power Supply
The Palmer PWT 06 is an extremely high-performance multiple power supply in 19" rack format with 6 isolated outputs, each of which delivers a maximum current of 1,000 mA (1A). It is the convenient and practical solution for powering wireless systems and eliminates the need for individual power adapters in power strips. The PWT 06 can power up to 12 wireless systems with DC current simultaneously, e.g., Sennheiser EM100G3, AKG 4500SET, Shure ULXP4, Line6 XDV75 or LD Systems products ranging from the LDMEI1000 to the LDWS1000R2 dual receiver.
The polarity is individually adjustable for each of the rear panel outputs, as is the output voltage of 9, 12 or 18 VDC; connections are made via 5.5 x 2.1 mm power sockets and 6 included DC cables. The PWT 06 package includes six Y-cables for supplying power to two devices via one output as well as a strain relief bar that can be used to secure the cables. Two-coloured indicator LEDs on the front panel of the PWT 06 for all outputs clearly show correct functioning or a possible malfunction.
- Type: Universal power supply
- Power socket: Schuko power cord
- Input voltage: 115 - 250 V
- Number of outputs: 6
- Output connections: 2.1 x 5.5 mm
- Output voltage: 9, 12, 18 V
- Max output current: 1000mA per output
- Outputs isolated: yes
- Polarity: switchable
- Length of cable: 1 m
- Indicators: 6x status LEDs, power
- Controls: Voltage, polarity, voltage selection switch
- Dimensions: 480 x 210 x 45 mm
- Other features: 6x long DC cable and 6x Y cable included
|
- Choice of 9V DC, 12V DC, 12V AC or 18VDC -150mA
- Noise-cancelling galvanic isolated outputs
- Traditional EI Transformer
- Several different voltage types served
- Current doubler = the possibility of as much as 600 mA
- Switchable 115V or 230V
- Compact, rugged, road-ready design
| High Quality OFC Cable(10 Inch) |
User\'s manual
Palmer MI PWT 08
Universal 9V Pedalboard Power Supply 8 Outputs
- Fully regulated universal pedalboard power supply
- 8 standard center negative outlets with 2,000 mA output total
- Two 9, 12 or 18 V switchable outputs
- Short circuit and overload protection for each outlet
- Bright power and outlet status LED indicators
- DC cables, Y cable and mains adapter included
The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.
Product type
Power Supplies
Mains connector
wall wart
Input voltage
100 - 250 V
Outputs
8
Output connectors
2.1 x 5.5 mm
Output voltage
12 V , 18 V , 9 V
Max. output current
2000 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Fault , Power
Controls
Output voltage selector
Width
140 mm
Depth
80 mm
Height
32 mm
Weight
0,3 kg
Features
8 x DC cable, 1 x merge cable
|
Keep your pedals powered all night long with the MXR DC Brick, a revamp of the DCB10. Now under the MXR brand, the new DC Brick features all of the short circuit and overload protection of the original but now handles twice the power, allowing you to use virtually any combination of effects. Additionally, each 9v output has a red LED that illuminates if there is a short so you can quickly identify and troubleshoot any power problems. The MXR DC Brick has eight 9v outputs and two 18v outputs, a change from the DCB10ʼs seven 9v outputs and three 18v outputs. And of course, the AC adapter and all necessary cables to connect pedals to the unit are included. |
Product Features: - 1.7 A current capacity can power more than 20 effects pedals, keyboards and other DC 9 V gear*
- Supplied with a full complement of connectors and jumper cords for total compatibility
- Includes 4 assorted jumper cables and 2 daisy-chain cables each with 5 connectors
- Takes up only one outlet space and frees up more room for your pedals
- Runs on any AC power supply from 100 - 240 V; worldwide usability without transformer
- Transformerless design eliminates 50/60-cycle hum and extraneous noise
- High-quality components and exceptionally rugged construction ensure long life
|
Reviews
There are no reviews yet.