Palmer STUDIMON 5 Powered 5″ Reference Nearfield Studio Monitor
5″ woofer and 0.75″ soft dome tweeter
Bass reflex design
60-W RMS bi-amping power amplifier
70 Hz to 20 kHz frequency response
Balanced XLR and 6.35 mm stereo jack input
Compact design
Elegant and robust housing
Active 5″ nearfield reference-class studio monitor
A basic requirement for any studio is that the mix is accurate and that it’s reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5″ woofer with rubber surround and a 0.75″ tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker’s features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Product type
Other Studio and Recording Equipment
Type
Studio monitor
Low/mid driver dimensions
5 “
Woofer size
127 mm
Woofer magnet
80 mm Ferrit
Woofer brand
Custom-made
HF driver dimensions
0.75 “
HF Driver Size
19 mm
HF driver magnet
28 mm Neodym
HF driver brand
Custom-made
Power amplifier (Class A)
Class A/B
Dispersion (H x V)
120 ° x 120 °
RMS
2 x 30 W
Frequency response
70 – 20.000 Hz
Crossover frequency
2500 Hz
Max. SPL
110 dBU @ 1 kHz dB
Signal-to-noise ratio
85 dB
Protection circuits
Overtemperature , short circuit
Input impedance
10,000 Ohm(s)
Controls
mains switch (on/off) , volume control
Indicators
orange (LED)
Line input connectors
6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage
Switching power supply
Operating voltage
100 V AC – 240 V AC, 50 – 60 Hz
Cabinet material
Birch Plywood , MDF
Housing Wall Strength
15 mm
Cabinet surface
Laminated , stained
Cabinet colour
Black
Cabinet construction
vented
Width
190 mm
Height
268 mm
Depth
215 mm
Weight
3,95 kg
Accessories (included)
Power cord
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “Palmer STUDIMON 5 Powered 5″ Reference Nearfield Studio Monitor” Cancel reply
Palmer STUDIMON 5
Powered 5" Reference Nearfield Studio Monitor
5" woofer and 0.75" soft dome tweeter
Bass reflex design
60-W RMS bi-amping power amplifier
70 Hz to 20 kHz frequency response
Balanced XLR and 6.35 mm stereo jack input
Compact design
Elegant and robust housing
Active 5" nearfield reference-class studio monitor
A basic requirement for any studio is that the mix is accurate and that it's reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5" woofer with rubber surround and a 0.75" tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker's features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Product type
Other Studio and Recording Equipment
Type
Studio monitor
Low/mid driver dimensions
5 "
Woofer size
127 mm
Woofer magnet
80 mm Ferrit
Woofer brand
Custom-made
HF driver dimensions
0.75 "
HF Driver Size
19 mm
HF driver magnet
28 mm Neodym
HF driver brand
Custom-made
Power amplifier (Class A)
Class A/B
Dispersion (H x V)
120 ° x 120 °
RMS
2 x 30 W
Frequency response
70 - 20.000 Hz
Crossover frequency
2500 Hz
Max. SPL
110 dBU @ 1 kHz dB
Signal-to-noise ratio
85 dB
Protection circuits
Overtemperature , short circuit
Input impedance
10,000 Ohm(s)
Controls
mains switch (on/off) , volume control
Indicators
orange (LED)
Line input connectors
6.3 mm stereo jack (balanced) , XLR (balanced)
Operating voltage
Switching power supply
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Cabinet material
Birch Plywood , MDF
Housing Wall Strength
15 mm
Cabinet surface
Laminated , stained
Cabinet colour
Black
Cabinet construction
vented
Width
190 mm
Height
268 mm
Depth
215 mm
Weight
3,95 kg
Accessories (included)
Power cord
PRICE PER UNIT
ADAMs A7 & A7X: the evolution of a legend
The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.
With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.
Driver technology
The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.
The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.
Amplifiers / controls
Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.
On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.
Mid-Woofer
Number
1
Basket Ø
7" (175 mm)
Voice coil Ø
1.5" (38 mm)
Cone material
Carbon/Rohacell/Glass Fiber
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Mid-Woofer
1
Type
PWM
Amp. power RMS / music
100 W / 150 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 75 W
Control panel
Input Sensitivity
-∞ to +14 dB
High Shelf EQ > 5 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR / RCA
General data
Frequency response
42 Hz - 50 kHz
THD 90dB/1m > 100 Hz
≤0.5 %
Long term output
≥106 dB
Max. peak
≥114 dB
Crossover frequencies
2500 Hz
Input impedance
30 KOhm
Weight
20.3 lb (9,2 kg)
Magnetically shielded
No
Height x Width x Depth
13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
MYTHO 8 is a two-way reference studio monitor equipped with two separate AB amplifiers - 200 W for the low frequencies and 100 W for the high - unparalleled for low distortion and natural sound. It features a high quality large metal dome tweeter for the best vocal reproduction and a 8” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. Thanks to the deeper low frequencies reproduced by its 8” woofer, the MYTHO 8 is perfect for medium to large control rooms.
A dedicated high quality DSP is provided on board. The cabinet is made in aluminium, internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.
Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.