DBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT

112.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: DBX DB-10 Category:
At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didnʼt settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct […]

 

Read more

At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didnʼt settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally thereʼs a direct box worthy of the dbx name.

Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic’d sound.

As a professional, you donʼt have time for interference, so weʼve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units.

So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB10 dB12 is for you.

Features

Weight 0.65 kg

Reviews

There are no reviews yet.

Be the first to review “DBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT”

Your email address will not be published. Required fields are marked *

Quick Comparison

DBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT removeOMNITRONIC LH-055 PASSIVE DI BOX removeALPHATON DI 1000 TUBE D.I BOX removeALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT remove
NameDBX DB-10 PASSIVE DI-BOX WITH GROUND LIFT removeOMNITRONIC LH-055 PASSIVE DI BOX removeALPHATON DI 1000 TUBE D.I BOX removeALPHATON SM-50 PASSIVE D.I-BOX WITH GROUNDLIFT removeSTEWART ADB4-4 CH. ACTIVE D.I BOX removeALPHATON IA-2 INLINE TRANSFORMER XLRf-m W-GROUNDLIFT remove
Image
SKUDBX DB-10LH055DI 1000SM-50ADB4EIA-2
Rating
Price 112.00 incl. GR VAT 43.00 incl. GR VAT 773.75 incl. GR VAT 119.04 incl. GR VAT 585.13 incl. GR VAT 119.04 incl. GR VAT
Stock

Available on backorder

In stock

In stock

In stock

Available on backorder

In stock

AvailabilityAvailable on backorderIn stockIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

At dbx, when we do something, we do it right. So when we decided to create our new direct injection boxes, we didnʼt settle for the same old tired approach to direct box design. With our dbx name on the line, how could we? One look at our new dB10 Passive and dB12 Active direct boxes will tell you that these are clearly different. With their bullet-proof construction, and extraordinary audio performance to rival their looks, finally thereʼs a direct box worthy of the dbx name.

Utilizing custom dbx mu-metal-shielded audio transformers, high-quality Neutrik® connectors, and low-noise circuitry preserves the sonic integrity and true characteristics of the signal source. Both boxes include a pad switch that accomodates instrument, line and even speaker level signals. Take even more control of your sound by utilizing the polarity invert switch to set the phase relationship between the direct and mic'd sound.

As a professional, you donʼt have time for interference, so weʼve included a ground lift switch to solve potential hum and buzz problems due to ground loops. And between the combined shielding of the cast metal chassis and the custom-wound transformer, you can be doubly assured of a clean signal free from interference. All of this sits atop a solid, stable footprint, that will keep the box from being dragged around the stage, and the unique contoured underside allows secure stacking of multiple units.

So whether you need to control the level, placement in the mix, or overall characteristics of 4 independent signals or control the gain leveling on a couple of stereo pairs, the dbx dB10 dB12 is for you.

Features
  • Parallel 1/4" Thru Jack
  • Transformer Isolated
  • Premium Shielded Custom dbx Transformer
  • Balanced XLR Lo-Z Output
  • 3-Way 0/20/40 dB Pad Switch
  • Flat/High-Cut Filter Switch
  • Output Polarity Invert Switch
  • Ground Lift Switch
  • 4 Year Warranty!

  • dB10 Specifications INPUT SECTION

    Input: 1 instrument/line/speaker level

    Connector: 1/4" jack

    Type: Unbalanced, RF filtered

    Impedance: 150k Ohm typical

    Max Input Level: +20dBu (0dB pad)
    +40dBu (20dB pad)
    +60dBu (40dB pad)

    OUTPUT SECTION

    Thru Output: 1 parallel connection from input jack

    Connector: 1/4" jack

    Type: Unbalanced, RF filtered

    Main Output: 1 line level

    Connector: XLR male jack

    Type: Balanced

    Impedance: 150 Ohm typical

    Max Output Level: 0dBu

    PERFORMANCE

    Transformer: Custom dbx mu-metal-shielded

    Frequency Response: 20Hz to 20kHz, +/-2.5dB

    Noise:

    THD:

    GENERAL

    Dimensions: 5.82" L X 5.44" W X 2.20" H (148 x 138 x 56mm)

    Weight: 1.4 lbs / 0.65 kg

    Note: Specifications subject to change without notice.

     1-channel DI box, passive Converts unbalanced 6.3 mm jack line input (e.g. from instruments) into balanced XLR output for connecting a mixer Switchable input attenuation: 0 dB, -20 dB, -40 dB Ground-lift switch eliminates ground loop problems 1 signal input (6.3 mm jack) 1 parallel output (6.3 mm jack), feed-through of the input signal 1 low-impedance output (XLR) Gray housing

    Tube-buffered DI-Box DI-1000

    The Tube-Buffered DI-Box DI-1000 allows the extraction of all the musical details of
    musical interfaces without degrading the sound. This can only be achieved by
    providing a very high input impedance to avoid any loading of instrument pickups.This
    design approach allows seemingly infinite headroom to preserve the real dynamic range
    of the interfaced instruments.A vacuum tube enables all these goals to be achieved
    without any compromises in sound quality.The sonic difference between a standard
    DI-Box and the Tube-Buffered DI-Box is comparable to the musical resolution difference
    between a standard microphone and a studio microphone.One of the best transformers,
    the very transparent sounding JENSEN JT-DB-E, was chosen providing complete ground
    isolation. The parameters of this transformer, like frequency response, phase response,
    group delay and geadroom capabilities, play a vital part in the performance of this DI-Box.
     
    Technical Specifications
    Input
    The signal of the instrument is directly fed to the tube circuit with > 20 MOhms input
    impedance to prevent any signal degradation, inevitable in traditional designs.
    Buffered Output“
    The second stage of the vacuum tube is used to buffer the signal and lower the output
    impedance to < 8 kOhms. This unity gain output allows for cable runs of 10 meters
    without loosing high frequency information.
    Boost circuit
    The boost circuit increases the signal send to the output transformer by 15 dB. This may
    be useful for instruments with extremely low output, but decreases headroom capability
    to 6 Volt rms. Under these circumstances the signal may be clipped, concerning the output
    transformer?s signal, which gives you 2nd harmonic tube-like distortion. This distortion
    normally does not occur - but is sometimes desirable, being the reason for this special feature.
    Unity circuit
    The unity circuit feeds a low distortion unity gain signal to the JENSEN output transformer.
    This gives the best possible sound quality.
    Ground-lift“-Switch
    This front panel mounted switch allows complete ground and electrical isolation between the
    direct injection box and the console or recording device.
     

    Mechanical Specifications
    Cabinet 2 mm stainless steel
    Front- and rear-panel 1,5 mm stainless steel lasercut and photo-chemically etched
    Dimensions 185 x 100 x 40 mm
    Vibration insulation 4 high-compliance rubber-elements
    Operating Voltage
    220/110 V AC, selectable via rear panel mounted switch. The fuse is easily
    accessible from the rear panel. IEC mains connector with optional fixture.
    Construction details
    Double sided glass fibre contacted PCB with 70 mm copper plating. 1% metal film resistors
    and the finest polypropylene capacitors are used in the signal path. MIL type Switchcraft jacks
    and high performance switches ensure flawless operation. The power supply is optimised via
    measurement quality toroid transformer and a low impedance design to ensure the lowest
    possible noise. Through a double sided PCB all parts are roadworthy secured. A waterclear
    blue LED perfects the aesthetics of the DI box.

    Technical Data
    Input impedance > 20 MOhm
    Output impedance180 Ohm at 1 kHz
    Frequncy response 20 Hz - 20 kHz (-0,1 dB)
                                 5 Hz - 120 kHz (-3 dB)
    THD at 0 dBv  0,06% at 20 Hz
                          0,04% at 1 kHz
                          0,035% at 20 kHz
    Signal to Noise Ratio 86 dB
    Tube ECC 83/7025 A - military E 83 CC optional
    Output transformer JENSEN JT-DB-E
    Polarity Pin 2 Hot , AES/IEC -Standard
    Max. Input voltage > 30 V peak
     

    The alphaton Direct Injection-Box SM-50 allows direct connection of electric guitars,
    electric bass, and electronic music instruments with mixing desks of PA systems
    and of recording studios.
    The SM-50 reduces the amount of microphones used on stage, thus improving gain
    before feedback.
    Coloration of sound is avoided. Clean signal without interference from other instruments
    eases the job of the recording engineer. The use of a strong aluminium die-cast box allows
    trouble-free function for a number of years even under adverse conditions. Double grounding
    (hum) can be eliminated by activating the built-in ground-lift switch. Isolation voltage between
    input and output is 2500 volts, against ground 1500 volts (with ground-lift switch activated).
    The box thus complies with toughest safety standards.

    Technical Data

    input impedance 20 kOhm
    input impedance, instrument input impedance, line-In input impedance, speaker output impedance 200 Ohm
    frequency response 30 ... 20000 Hz, ± 1 dB
    THD isolation voltage tranformer pri/sec 2500 V
                            outpur to ground 1500 V
    inputs 1/4" phone jacks, unbalanced
    outputs XLR, balanced, microphone level.
               pin 1 = ground, pin 2 = hot, pin 3 = cold
    case aluminium die-cast
    weight 230 g
    dimensions113 x 71 x 37 mm
     

    You're serious about getting rid of all that excess noise on stage, but you've got so many line
    instruments you don't know where to start. The ADB-4 from Stewart can take care of all your
    high impedance problems. The ADB-4 is 4 active direct boxes, all in a module that only takes
    up half a space on your keyboard rack. It's a rugged, durable piece of equipment that packs a
    lot of DI power.

    ? Requires phantom power or 9v battery
    ? Ground lift switch
    ? Instrument or speaker level switch
    ? Transformerless
    ? Can be used with amp up to 400w
    ? RF shielding

    Inline Transformer IA-2

    The model IA-2 line matching transformers !S designed to properly match a low impedance
    signal to a low impedance source. The advantage of "ground lift" switching allows to optmize
    hum problems.
     
    Technical Data
    Frequency response 20 Hz - 20 KHz + 1 dB
    Impedance 600 : 600 Ohm
    THD K3 50 Hz = 0.5 %
    Level < + 6 dBm
    Weight 100 g
    Dimensions diameter 17 mm, lenght 115 mm
     

    Weight0.65 kg0.70 kg0.60 kg0.23 kg0.50 kg0.10 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.65 kg
    Weight 0.70 kg
    Weight 0.60 kg
    Weight 0.23 kg
    Weight 0.50 kg
    Weight 0.10 kg