Content |
This trapezoidal, 15" speaker system is at home in live sound, dance music and speech reinforcement.
Features :
- JBL 15 in low frequency driver with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
| - JBL 2414H-C 25 mm (1 in ) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
| - The advanced network topology crossover design shapes the frequency response to deliver coherent summation in the crossover region.
| - High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
| - Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
| - The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in ) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
| - SonicGuardTM protects the high frequency driver from excess power without interrupting the performance.
| - Non-resonant, all-steel handles are used.
| - Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
| - Dual-angle pole-mount socket allows the speakers to tilt 10° for more uniform audience coverage.
|
Specifications :
Power Rating | : | 250 W / 1000W |
| Frequency Range (-10 dB) | : | 41 Hz - 18 kHz |
| Frequency Response (±3 dB) | : | 59 Hz - 13 kHz |
| Sensitivity (1w/1m) | : | 99 dB SPL |
| Nominal Impedance | : | 8 ohms |
| Recommended Amplifier Power | : | 250 W to 500 W into 8 ohms |
|
| Nominal Dispersion | : | 90º x 50º |
| Crossover Frequency | : | 2.2 kHz |
| Dimensions
(H x W x D) | : | 699 mm x 460 mm x 432 mm
(27.5 in x 18.1 in x 17 in) |
| Weight | : | 27.4 kg (60.5 lb) |
| High Frequency Driver | : | JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionTM Waveguide |
| Low Frequency Driver | : | JBL M115-8A |
| Input Connectors | : | Parallel Neutrik® Speakon® NL-4 (x1); .25in TS phone jack (x1) |
| Grille | : | 18-gauge, powder-coated steel |
| Mounting & Suspension | : | 36 mm, dual-angle pole-mount socket | |
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
|
SPECIFICATIONS
| MODEL | TITAN 15 PASSIVE | GENERAL INFO |
| System type | 15" 2-way passive | Frequency response +/- 3db | 50-18kHz | Sensitivity (db 1w@1m) | 97dB | System impedance | 8 ohms | Maximum SPL Peak dB | 129dB | POWER HANDLING (Watts) |
| Continuous RMS | 400 | Program | 800 | Peak | 1600 | LF DRIVER |
| Lf driver size mm / inches | 1x15“ | Lf voice coil size | 75mm/3“ | HF SECTION |
| Hf voice coil size | 51mm/2" | Hf type | Compression Driver | Hf diaphragm material | Titanium | Horn dispersion (H x V) | 90 x 60 | Hf exit size mm / inches | 25mm/1“ | Hf horn shape | EWG™ - Elliptical Waveguide | Hf peak indicator | Peak LED ring in horn throat | CROSSOVER SECTION | 2-way | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | PHYSICAL FEATURES |
| Finish | Black or White | Handle quantity | 2 carry handles (one on each side) | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | Enclosure type | Molded Polypropylene | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | IN / OUT PANEL (speaker Level) |
| Input connector | 2 x 1/4" jacks and2 x Speakon™ | DIMENSIONS & WEIGHT |
| Height ( mm / ins ) | 708mm/27.9“ | Width Front / Rear / mm / ins | 477.8mm/18.8“ | Depth ( mm / ins ) | 401.77mm/15.8“ | Net weight ( kg / lbs ) | 22kg/48.4 lbs | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
- High-power 2-way PA sound reinforcement speaker system for live and playback applications (250 Watts Continuous / 1000 Watts Peak Power)
- Available in black or white finish
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Extremely powerful 15" long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.75'' titanium-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Overload-protection circuitry ensures optimal HF driver protection
- Versatile trapezoidal enclosure design allows different positioning:
- -Stand mounting with 35-mm pole socket
- -Tilts on its side for use as a floor monitor
- Optional swiveling mounting brackets
- Ergonomically shaped handles for easy carrying and setup
- 2 professional speaker connectors plus 1⁄4'' jack connectors
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
These loudspeakers take everything musicians love about the original B215 and upgrade them with the same bass and treble/mid transducers found in our wildly popular B215A active versions for even better sound and power handling. And with integrated overload protection circuitry, they arrive ready to push it to the limit without putting their high or low frequency drivers in danger.
Triumphant transducers
Every stitch of these loudspeakers is built to deliver, but the fact is that their transducers (woofers and tweeters) are the only part you actually hear. While some manufacturers are okay with putting off-the-shelf transducers in their boxes, we custom-design and build ours from scratch. Not only do we wind our own voice coils, we grow the trees that are processed into the paper pulp that becomes the cones. We even machine the frames and backplates. BEHRINGER's quality is truly under control.
Big sound, lightweight, low price
Big here, small there, lots of this, light on that—everyone's got their preferences, but the EUROLIVE B215XL has proportions we can all agree upon. These loudspeakers pack a clean, punchy wallop (and can handle up to 1000 Watts), they are easy to lift by their recessed handles (38.7 lbs) and are available at insanely low prices. Who wouldn't want to hook up with one of these beauties?
Get on the stick…or get on down
The B215XL is perfect either as part of a PA system or as an onstage monitor. If the situation calls for a PA, mount the speakers on stands via the 35mm pole socket. From there, send a line from the MAIN OUT of a mixer (such as a XENYX 1202FX) to a power amplifier (like the EUROPOWER EP1500). Finally, attach B215XL to each of the amp's outputs. These loudspeakers have inputs for both professional speaker cable and ¼" cable. Because these loudspeakers have two parallel inputs, you can connect up to two of them to any channel on a power amp.
But they don't have to be confined to an upright position. Just lay them on their sides for use as a floor monitor. You'll find that they tilt to the ideal angle for onstage monitor wedge applications.
Choose white, black, on or off the wall…
You asked for it, and now we're proud to offer these amazing loudspeakers in black or white. We now also make swiveling wall-mount brackets for the B215XL. That means they're ready to fit even more comfortably into a venue's color scheme and layout. No matter what your sound or aesthetic needs may be, we make one that's just right for you!
| The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
Electro voice Zx5-60B
The Zx5 is a 15“, 2-way cabinet with a lightweight, high-impact composite enclosure, featuring the newest generation of EV components: the DXV3150, 500W, 15" forced air cooled woofer with 3" voice coil, and the ND2, 2" neodymium compression driver with a 2 mil titanium diaphragm. The Zx5 is rated for 600 watts long-term power handling (2400 W peak) and can produce 132 dB SPL with very smooth 58Hz-15kHz frequency response. With two available coverage patterns (60?°x60?° or 90?°x50?°), two adjustable monitor angles (45?° or 55?°) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. EV Zx5 loudspeakers are available in black and white for indoors and dedicated PI versions for outdoor applications.
|
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, black
- Punched net: Surface-treated steel plate, black
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
|
Reviews
There are no reviews yet.