PEAVEY SP4 Passive Speaker 1000 Watt

899.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 542.PVY.001.4.P Category:
Quasi-three way, full-range/bi-ampable Sound Reinforcement system 69Hz to 17kHz Two 15 BWX Black Widow 4″ diameter VC woofers Exclusive Quadratic Throat Waveguide? technology 2,000 watts program, 4,000 watts peak Two 15″ BWX Black Widow 4″ diameter VC woofers Full-range inputs include two 1/4″ phone jacks, one four-pin, twist lock connector & one Neutrik NL4 Speakon […]

 

Read more

  • Quasi-three way, full-range/bi-ampable Sound Reinforcement system
  • 69Hz to 17kHz
  • Two 15 BWX Black Widow 4″ diameter VC woofers
  • Exclusive Quadratic Throat Waveguide? technology
  • 2,000 watts program, 4,000 watts peak
  • Two 15″ BWX Black Widow 4″ diameter VC woofers
  • Full-range inputs include two 1/4″ phone jacks, one four-pin, twist lock connector & one Neutrik NL4 Speakon switching jack (bi-amp only)
  • Asymmetrical horn aims the sound down 10° (at the audience, not over their heads)
  • Full length black powder coated metal grille
  • RX?22CT compression driver
  • M8 threaded mounting suspension points (3 top, 3 bottom and 2 each side & 1 each top rear and bottom rear)
  • Sound Guard III tweeter protection
  • Four large rubber feet on bottom for floor use
  • Trapezoidal plywood enclosure finished in black textured paint
  • Weight Unpacked: 43.3 kg
  • Weight Packed: 45.3 kg
  • Width Packed: 54.991 cm
  • Height Packed: 124.9934 cm
  • Depth Packed: 51.0032 cm
Weight 43.30 kg

Reviews

There are no reviews yet.

Be the first to review “PEAVEY SP4 Passive Speaker 1000 Watt”

Your email address will not be published. Required fields are marked *

Quick Comparison

PEAVEY SP4 Passive Speaker 1000 Watt removeTOA HS-150B Coaxial Array Speaker System 100W/8Ω removeELECTRO VOICE RX115-75 SPEAKER 2 WAY 400W removeRCF P3115-T: 300W AES, 15", 1", WEATHERPROOF COAXIAL TWO WAY SPEAKER removeSAMSON dB500 2-Way Loudspeaker 500 Watts removeAdamson SX-18 - Professional 3 way active speaker remove
NamePEAVEY SP4 Passive Speaker 1000 Watt removeTOA HS-150B Coaxial Array Speaker System 100W/8Ω removeELECTRO VOICE RX115-75 SPEAKER 2 WAY 400W removeRCF P3115-T: 300W AES, 15", 1", WEATHERPROOF COAXIAL TWO WAY SPEAKER removeSAMSON dB500 2-Way Loudspeaker 500 Watts removeAdamson SX-18 - Professional 3 way active speaker remove
Imagercf p3115 loudspeaker waterproof coaxial speaker
SKU542.PVY.001.4.PHS-150B001875P3115TdB500SX-18
Rating
Price 899.00 incl. GR VAT 254.00 incl. GR VAT2,049.84 incl. GR VAT 1,364.00 incl. GR VAT 392.45 incl. GR VAT 5,367.43 incl. GR VAT
Stock

In stock (can be backordered)

In stock

Available on backorder

Available on backorder

In stock

Only 1 left in stock (can be backordered)

AvailabilityIn stock (can be backordered)In stockAvailable on backorderAvailable on backorderIn stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
  • Quasi-three way, full-range/bi-ampable Sound Reinforcement system
  • 69Hz to 17kHz
  • Two 15 BWX Black Widow 4" diameter VC woofers
  • Exclusive Quadratic Throat Waveguide? technology
  • 2,000 watts program, 4,000 watts peak
  • Two 15" BWX Black Widow 4" diameter VC woofers
  • Full-range inputs include two 1/4" phone jacks, one four-pin, twist lock connector & one Neutrik NL4 Speakon switching jack (bi-amp only)
  • Asymmetrical horn aims the sound down 10° (at the audience, not over their heads)
  • Full length black powder coated metal grille
  • RX?22CT compression driver
  • M8 threaded mounting suspension points (3 top, 3 bottom and 2 each side & 1 each top rear and bottom rear)
  • Sound Guard III tweeter protection
  • Four large rubber feet on bottom for floor use
  • Trapezoidal plywood enclosure finished in black textured paint
  • Weight Unpacked: 43.3 kg
  • Weight Packed: 45.3 kg
  • Width Packed: 54.991 cm
  • Height Packed: 124.9934 cm
  • Depth Packed: 51.0032 cm

 

 

Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.

 

Product Specifications
  • Enclosure: Sealed type
  • Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
  • Rated Impedance: 8 Ω
  • Sensitivity: 98 dB (1 W, 1 m)
  • Frequency Response: 70 - 20,000 Hz
  • Crossover Frequency: 3 kHz
  • Directivity Angle: Horizontal: 90゜, Vertical: 40゜
  • Speaker Component: Low frequency: 38 cm (15) cone-type
  • Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
  • Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
  • Finish: Enclosure: Polypropylene, black
  • Punched net: Surface-treated steel plate, black
  • Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
  • Weight: 12 kg (26.46 lb)

EV\'s Rx Series loudspeakers have become the go-to systems for contractors, regional sound companies, and anyone who wants to step up to high-end pro audio without blowing the budget. With integrate L-track rigging points on top and bottom, the Rx cabinets are easy to fly. The unique, asymmetrical, fully rotable horn provides a 15-degree down angle to ensure HF coverage where needed, while avoiding acoustic spill. EV\'s powerhouse DH7 large-format driver (3" voicecoil, 1.4" exit) provides the HF engine, while a selection of EV\'s DL and EVZ woofers anchor the LF and sub frequencies. EV\'s combination of high-level components and unique design make the QRx Series one of the best and most versatile values in the industry.

15-inch two-way, full-range loudspeaker system with 450 watts continuous, 1,800 watts peak power handling. Can be easily biamped with 400 watts LF and 75 watts HFcontinuous DH73-inch voice coil compression driver on an asymmetrical 75-? x 50-? fully rotatable constant-directivity horn. In factory-delivered position the horn provides a 15-?up/35-? down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined Five-sided cabinet design allows this main PA system cabinet to easily conform to duties as a floor monitor, as a front-of-house system or to be tucked tightly against a ceiling for low-profile applications. Available in black or white. 18-ply, void-free plywood enclosure comes equipped with metal stand mount, L-track rigging on the top and bottom and a single-stud pull-up point on the rear of the enclosure for use flexibility Ring-Mode Decoupling for beautifully detailed vocals and smooth midrange performance

The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications. The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
  • Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
  • Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
  • Stainless steel bracket
  • 15" high-output LF transducer with 2" voice coil
  • RCF Precision Neo 1" Compression Driver with 1.5" voice coil
  • 90° x 60° constant directivity horn
  • 10° X 20° enclosure sides for array configurations
  • Active Mosfet Compression Driver Protection
  • 12 brass suspension points (M10)
  • Line transformer
Acoustical Specifications
  • Frequency Response -10 dB: 75 Hz ÷ 20 kHz
  • Max SPL @ 1m: 129 dB
  • Horizontal coverage angle: 90°
  • Vertical coverage angle: 60°
  • Directivity index; Q: 13.3
  • System Sensitivity: 98 dB
  • Nominal Impedance: 16 Ω
  • Power Handling: 300 W
  • Peak Power Handling: 1200 W
  • Protections: dinamyc
  • Crossover frequencies: 1300 Hz
Transducers
  • Compression Driver: 1" HF driver, 1.5" voice coil
  • Nominal Impedance: 8 Ω
  • Input Power Rating: 25 W AES
  • Sensitivity: 108 dB
  • Woofer: 15" woofer, 2.5" voice coil
  • Nominal Impedance: 16 Ω
  • Input Power Rating: 250 W AES
  • Sensitivity: 98 dB
Input Section
  • Input connector: 4-adriges Neopren Kabel, 5m
  • Constant voltage transformer: 70/100 V
  • Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
  • Cabinet Material: Polyethylene rotomoulded
  • Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
  • Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
  • Colour: grey
Physical Specifications
  • Height: 463 / 18.22 mm/inch
  • Width: 463 / 18.22 mm/inch
  • Depth: 433 / 17.04 mm/inch
  • Net Weight: 19.4 / 42.76 kg/lbs

 

The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.

The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

Description:

The SX18 is a switchable 3 way active, 2 way passive, arrayable loudspeaker. Designed to be used as the main enclosure for small to mid-sized venues or as a supplemental cabinet for large scale sound reinforcement, this enclosure provides high sound pressure levels in a small, lightweight package. Adamson?s Proprietary Kevlar drivers and internal crossovers are employed throughout the SX18 enclosure and its integral fly hardware makes installation of the product fast and effective. Moving the SX18 is easy and efficient with the supplied dolly board. A flexible, high powered enclosure, the SX18 is suited for a wide variety of applications.

Applications:

Live Concert Reproduction
Side Fill Monitoring
Near Field Applications
Theatres
Houses of worship
Dance Clubs

Features:

Kevlar 18" bass and 10" midrange Drivers
1.5" High Frequency Compression Driver
2-Way Bi-Amp/3-Way Tri-amp Operation (selectable)
Adamson Acoustic Waveguide
Integrated Fly Points
Supplied Dolly Board
Durable, Dual Component Finish
Honeycomb Punched, Steel Grille
Roadworthy Construction

Weight: 67 kg

Weight43.30 kg12.00 kg32.00 kg3.00 kg10.00 kg67.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 43.30 kg
Weight 12.00 kg
Weight 32.00 kg
Weight 3.00 kg
Weight 10.00 kg
Weight 67.00 kg