PEAVEY PVM 480 Condenser Microphone Hypercardioid Black

129.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 550.PVY.005.BLK Category:
Very effective super-cardioid directional pattern 500 ohms balanced Flat frequency response of 40 Hz – 20 kHz -45 dB sensitivity 128 dB maximum SPL 20 dB (typical) front to back rejection Powered from any 9-52 volt phantom power source Rugged Brass Handle Black powder coat finish Includes swivel adapter, and windscreen Permanently polarized condenser element […]

 

Read more

Very effective super-cardioid directional pattern
500 ohms balanced
Flat frequency response of 40 Hz – 20 kHz
-45 dB sensitivity
128 dB maximum SPL
20 dB (typical) front to back rejection
Powered from any 9-52 volt phantom power source
Rugged Brass Handle
Black powder coat finish
Includes swivel adapter, and windscreen
Permanently polarized condenser element (back-electret type)
Wide dynamic range
Weight Packed: 1.14 lb(0.516 kg)
Width Packed: 4.75“(12.065 cm)
Height Packed: 11.75“(29.845 cm)
Depth Packed: 3“(7.62 cm)
Weight 0.52 kg

Reviews

There are no reviews yet.

Be the first to review “PEAVEY PVM 480 Condenser Microphone Hypercardioid Black”

Your email address will not be published. Required fields are marked *

Quick Comparison

PEAVEY PVM 480 Condenser Microphone Hypercardioid Black removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeAKG CK 33 - Cardioid Condenser Microphone removeAKG CK 31 Cardioid Condenser Microphone capsule (modular) remove
NamePEAVEY PVM 480 Condenser Microphone Hypercardioid Black removeRODE NT-6 COMPACT CONDESER MICROPHONE Demo or end of life removeFOSTEX MC10ST ELECTREC CONDENSER STEREO PAIR removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeAKG CK 33 - Cardioid Condenser Microphone removeAKG CK 31 Cardioid Condenser Microphone capsule (modular) remove
Imageck 31 akg microphone
SKU550.PVY.005.BLKH11RD00016MC10STC 568BCK 33CK 31
Rating
Price 129.00 incl. GR VAT 179.00 incl. GR VAT 181.99 incl. GR VAT 414.00 incl. GR VAT 164.00 incl. GR VAT 76.87 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

Available on backorder

In stock (can be backordered)

AvailabilityIn stockIn stockIn stockIn stockAvailable on backorderIn stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Very effective super-cardioid directional pattern
500 ohms balanced
Flat frequency response of 40 Hz - 20 kHz
-45 dB sensitivity
128 dB maximum SPL
20 dB (typical) front to back rejection
Powered from any 9-52 volt phantom power source
Rugged Brass Handle
Black powder coat finish
Includes swivel adapter, and windscreen
Permanently polarized condenser element (back-electret type)
Wide dynamic range
Weight Packed: 1.14 lb(0.516 kg)
Width Packed: 4.75“(12.065 cm)
Height Packed: 11.75“(29.845 cm)
Depth Packed: 3“(7.62 cm)

The R?DE NT6 is specifically designed for difficult mounting applications. Although
clearly relevant to instrument mic'ing, the new NT6 is extremely well suited to any
situation where a small 'unobtrusive' but powerful microphone system is required.
The NT6 utilises the 1/2" (externally biased) gold sputtered true condenser transducer
used in the internationally renowned R?DE NT5. The capsule is designed to attach to
a custom made, multi-position swivel mount allowing it to be independently positioned
with ease.
To further increase the versatility of the NT6, it is supplied with 2 thread adaptors - 1/4"
to 5/8" and 1/4" to 3/8" that enable the capsule assembly to be securely attached to a
wide variety of mic stands, tripods and boom poles.
The capsule is connected to the pre-amplifier (body) by a custom 3 m Kevlar? fibre reinforced
cable. Housed within the heavy duty satin-nickel-plated body, is a state-of-the-art low noise
balanced output preamplifier, exhibiting a wide dynamic range and full frequency response.
The surface-mount pre-amplifier circuit also incorporates a 2-position variable pad: 0 dB an -10 dB
attenuation, and a 2-position variable high-pass filter that enables you to step from a flat response
to 80 Hz high pass filter; both conveniently located away from the capsule, providing additional
control without the need to move the capsule once in position.
The NT6 is intended for Film, Television, Broadcast, Live Performance, Theatre, Television,
Surround and Environmental recording applications or wherever your imagination takes you.
The NT6 is produced in R?DE's design and manufacturing facility in Sydney, Australia. Utilising
state of the art computer controlled machining and assembly technologies, R?DE is able to
achieve levels of finish and repeatability of the most exacting standards and tolerances.
The NT6 comes supplied with Microphone Preamp (Body), Capsule, 3 m Kevlar? fibre reinforced
cable, RM5 Stand Mount, 2-axis Swivel Mount, 2 thread adaptors, ZP1 Zip Pouch and WS5 Wind Shield.
 
FEATURES:
? 1/2? (externally biased) gold sputtered true condenser capsule ? Heavy duty satin-nickel-plated body
? 2-position variable pad: 0 dB and -10 dB ? 2-position variable high-pass filter: flat and 80 Hz ? Surface
mount technology ? Low noise ? Wide dynamic range ? Full frequency response ? Supplied complete
with 2-axis swivel mount, 2 thread adaptors, M5 clip, WS5 (Black) Wind Shield and Soft Pouch ? Designed
& manufactured in Australia ? Full 2 year guarantee 
 
Operation power:
The NT6 is designed to operate from phantom power to the P48 standard. The NT6 will operate
between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output XLR connector. 
Operation output impedance:
Output Impedance: The NT6 will operate satisfactorily into a load impedance as low as 1 kΩ. If a
load below this is used, the output signal level will be reduced. The NT6 output is balanced between
pin 2 (hot) and pin 3 (cold). Pin 1 is ground.
 Acoustic principle:
Externally polarised 1/2" (13mm) pressure gradient condenser
Directional pattern:  Cardioid
Frequency range:
40 Hz ~ 20,000 Hz selectable HPF @ 80 Hz/12 dB/octave
Output impedance: 200 Ω
Signal noise ratio din iec 651:
75 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 19 dB SPL (per IEC651, IEC268-15)
Maximum spl:
138 dB (@ 1% THD into 1 kΩ)148 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity:
-38 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB
Dynamic range din iec 651: 119 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Weight: 386 grm.
Maximum output voltage: 6 dBu (@ 1% THD into 1 kΩ)
Pin assignment:
3 pin XLR, balanced output between pin 2(+), pin (-) & pin 1 (ground)
 

8 Wide frequency response range
High sensitivity, Low distortion
High input withstand S.P.L.
Rugged brass case, Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
 
PREMLIMINARY INFORMATION.
The MC10ST is a stereo microphone set including a pair of cardioid electret condenser microphones,
shock mount adapters, stereo mounting bracket and wind screens. The MC10ST can be used in a
wide range of applications, from studio and home recording to field or location sound aquisition.

Wide frequency response range
High sensitivity
Low distortion
High input withstand S.P.L.
Rugged brass case
Light weight
Shock mount adapters, stereo mounting bracket and wind screens as standard
Dedicated carry case as standard
 
SPECIFICATIONS:
Type: Back Electret Condenser Microphone
Polar Pattern: Cardioid
Frequency Response: 40Hz to 20kHz +/-10dB
Sensitivity: -40dBV/pa (10mv/pa)
Rated Impedance: 200ohm
Equivalent Noise Level: 22dB (A weighted IEC/DIN 651)
Maximum SPL: 134dB (THD

C 568 B 

Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
 
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
 
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption

Technical specifications

Polar pattern

hypercardioid

Frequency range

50 to 20,000 Hz

Sensitivity

20 mV/Pa (?34 dBV)

Max. SPL

125 dB (k=1 %)

Equivalent noise level

21 dB-A

Signal/noise ratio (A-weighted)

73 dB

Impedance

600 ohms

Recommended load impedance

>2000 ohms

Supply voltage

9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)

Current consumption

Connector

Discreet Acoustics Modular standard

Finish

matte dark gray

Dimensions

13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)

Net weight

5 g (0.17 oz.)

Shipping weight

88 g (3.1 oz.)

Accessories (included)

W 30

Technical specifications
Polar pattern cardioid
Frequency range 50 to 20,000 Hz
Sensitivity 20 mV/Pa (?34 dBV)
Max. SPL 125 dB (k=1 %)
Equivalent noise level 21 dB-A
Signal/noise ratio (A-weighted) 73 dB
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power, requires DPA adapter (supplied with most Installation Modules)
Current consumption  
Connector Discreet Acoustics Modular standard
Finish matte dark gray
Dimensions 13.5 x 20 mm dia. (0.5 dia. x 0.8 in.)
Net weight 5 g (0.17 oz.)
Shipping weight 88 g (3.1 oz.)
Accessories (included) W 30
Weight0.52 kg2.00 kg1.12 kg0.71 kg0.30 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.52 kg
Weight 2.00 kg
Weight 1.12 kg
Weight 0.71 kg
Weight 0.30 kg
Weight 0.30 kg