PEAVEY PVi-8B Plus 9 CHANNEL POWERED MIXER 500 Watt

449.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: 534.PVY.001.8B.PLUS Category:
The PVi 8B+ powered mixer is easy to use and transport, and is designed with the latest Peavey technology. Constructed with a rugged metal structure, wood cabinet, vinyl surface and protective corners, the PVi 8B Plus is the ideal powered mixer. From packaging to quality control, Peavey produce a products of maximum quality and efficiency […]

 

Read more

The PVi 8B+ powered mixer is easy to use and transport, and is designed with the latest Peavey technology. Constructed with a rugged metal structure, wood cabinet, vinyl surface and protective corners, the PVi 8B Plus is the ideal powered mixer. From packaging to quality control, Peavey produce a products of maximum quality and efficiency with the same specifications you see on other, more expensive powered mixers.

“pvi8bplusproduct“

  • 350 watts into 4-ohm (2 x 8 ohm) speakers
  • 8 Balanced microphone and line inputs
  • Tape/CD inputs
  • Reverb level control on each channel
  • Line Out for connection to external amplifiers
  • Monitor output for connection to external amplifiers
  • Return input for connection of external effects processors
  • Record Out for taping
  • RF interference protection on all inputs
  • Switchable 48 volt phantom power for support of electret microphones
  • Footswitch jack for enable/disable effects
  • Effects bus output for connection to external effects processing
Weight 17.70 kg

Reviews

There are no reviews yet.

Be the first to review “PEAVEY PVi-8B Plus 9 CHANNEL POWERED MIXER 500 Watt”

Your email address will not be published. Required fields are marked *

Quick Comparison

PEAVEY PVi-8B Plus 9 CHANNEL POWERED MIXER 500 Watt removeBEHRINGER PMP2000D 14-CHANNEL 2000 Watt Powered Mixer With KLARK TEKNIK FX removeDYNACORD POWERMATE 600-3 COMPACT POWER MIXER.2X340W-4ohms 3 years warranty removePHONIC Powerpod-415 RW Head Powered Mixer removeBEHRINGER PMP580S Active Mixer 2 Χ 250 Watts/4Ω removeBEHRINGER PMP6000 Europower Powered Mixer 2 x 300W RMS (8ohm) 20 channel remove
NamePEAVEY PVi-8B Plus 9 CHANNEL POWERED MIXER 500 Watt removeBEHRINGER PMP2000D 14-CHANNEL 2000 Watt Powered Mixer With KLARK TEKNIK FX removeDYNACORD POWERMATE 600-3 COMPACT POWER MIXER.2X340W-4ohms 3 years warranty removePHONIC Powerpod-415 RW Head Powered Mixer removeBEHRINGER PMP580S Active Mixer 2 Χ 250 Watts/4Ω removeBEHRINGER PMP6000 Europower Powered Mixer 2 x 300W RMS (8ohm) 20 channel remove
Image
SKU534.PVY.001.8B.PLUSE008812E004223H01PH00036E006171E005339
Rating
Price 449.00 incl. GR VAT 455.00 incl. GR VAT 2,000.00 incl. GR VAT 179.00 incl. GR VAT 294.00 incl. GR VAT 725.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe PVi 8B+ powered mixer is easy to use and transport, and is designed with the latest Peavey technology. Constructed with a rugged metal structure, wood cabinet, vinyl surface and protective corners, the PVi 8B Plus is the ideal powered mixer. From packaging to quality control, Peavey produce a products of maximum quality and efficiency with the same specifications you see on other, more expensive powered mixers. “pvi8bplusproduct“
  • 350 watts into 4-ohm (2 x 8 ohm) speakers
  • 8 Balanced microphone and line inputs
  • Tape/CD inputs
  • Reverb level control on each channel
  • Line Out for connection to external amplifiers
  • Monitor output for connection to external amplifiers
  • Return input for connection of external effects processors
  • Record Out for taping
  • RF interference protection on all inputs
  • Switchable 48 volt phantom power for support of electret microphones
  • Footswitch jack for enable/disable effects
  • Effects bus output for connection to external effects processing

 

 

Manual

   

  •     Ultra-compact 2 x 1000-Watt stereo powered mixer
  •     Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and  super-light weight
  •     9 "Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
  •     Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  •     "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
  •     14-channel mixer section features 6 mono and 4 stereo channels
  •     Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
  •     Dual 9-band graphic EQs allow precise frequency correction of monitor and main outputs
  •     Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
  •     Adjustable stereo Aux input for connecting external signal sources
  •     Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
  •     3-Year Warranty Program*
  •     Designed and engineered in Germany

EUROPOWER PMP2000D:
The amazing PMP2000D Powered Mixer packs 2,000 Watts of high-efficiency Class-D output power, while maintaining an incredible power-to-weight ratio. With 14 available input channels, the PMP2000D features 9 of our premium-grade "Invisible" IMP mic preamps with switchable +48 V phantom power, 4 stereo channels, an ultra-high quality KLARK TEKNIK FX processor with 25 presets including studio-class reverbs, delays, pitch shifter and various multi-effects - and dual 9-band stereo graphic EQs. Top it all off with "Wireless-ready" operation, thanks to our high-quality ULM digital wireless microphones (sold separately), and the PMP2000D is the ideal, easy to use, and ready for anything live sound solution!

Class-D - Massive Power, Perfect Sound:
Thanks to our revolutionary Class-D amplifier technology, we are able to provide you with enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency - and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely-powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment.

Massive Mono or Stunning Stereo:
The powerful PMP2000D gives you the choice of 2 x 1,000-Watt stereo, 2 x 1,000-Watt dual mono (1 Mains powered output, 1 Monitor powered output), or 2,000-Watt bridged mono modes. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP2000D can accommodate all of them with ease. This sonic versatility also makes this outstanding powered mixer an excellent choice for churches where vocals and stereo recordings often share face time.

Outstanding "Invisible" Mic Preamps
The EUROPOWER PMP2000D\'s six mono inputs (plus 3 of the 4 stereo channels) feature our ultra-low noise, high-headroom IMP "Invisible" mic preamps, which have been praised by audio professionals all over the world. These studio-grade mic preamps off er a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to over 200 kHz, and are perfectly matched to every conceivable microphone - with up to 60 dB gain and a +48 V phantom power supply. Armed with these superb mic preamps, the PMP2000D provides exceptionally-transparent and crystal-clear sonic performance - making it the ideal choice for both live sound and studio recording applications.

KLARK TEKNIK - The Reverb that Made History:
KLARK TEKNIK is recognized worldwide as one of the most prestigious British audio companies, with a 40-year pedigree and even a TEC Lifetime Achievement Award to back it up. The Company has designed and manufactured products for world-class artists, and their legendary DN780 reverb processor is considered by leading audio engineers around the world as the industry standard. Check out their website to learn more about KLARK TEKNIK\'s legendary heritage.
BEHRINGER is proud to incorporate custom-engineered KLARK TEKNIK effects into their products. Featuring 25 world-class presets to choose from including reverb, chorus, flange, delay, pitch shift and many other amazing effects, KLARK TEKNIK created the 24-bit, studio-grade effects engine for BEHRINGER - to give your performance that truly professional finishing touch.

Own the Stage with Digital Wireless:
Get wireless-ready with the built-in, dedicated connectivity of our ULTRALINK ULM Series wireless microphone system (to be ordered separately). Wireless gives you maximum freedom and mobility without the need to run cables. The highest-quality sound is provided thanks to the ULM\'s digital, license-free 2.4 GHz frequency spectrum.
The ULM wireless system combines professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Just plug in the ULM receiver "dongle“, and instantly you have an exceptional wireless mic system. Freeing you from cables is the simple and easy way to own the stage.

Getting Connected:
Use the 2-Track RCA inputs to feed in external stereo signals; conversely, the 2-Track RCA outputs can be used to send line-level signals from the mixer to a recording device. Powered outputs on the PMP2000D are available in the professional, twist-lock Speakon-compatible variety. In addition you\'ll find a convenient 1/8" (35 mm) Aux In jack for connecting your smartphone or mp3 device for playing backing tracks, or prerecorded music during your breaks.

 

 

Microphone Inputs

Type

9x XLR, electronically balanced

Mic Input Noise (E.I.N.)

20 Hz to 20 kHz
At 0 Ohms Source Impedance: -108 dB / -110 dB A-weighted
At 50 Ohms Source Impedance: -108 dB / -110 dB A-weighted
At 150 Ohms Source Impedance: -106 dB / -107 dB A-weighted

Frequency Response

< 20 Hz to 22 kHz (-1 dB)
< 20 Hz to 35 kHz (-3 dB)

Maximum Input Level

+13 dBu with PAD

Impedance

1.5 kOhms, balanced

Signal-to-Noise Ratio (SNR)

98 dB / 100 dB A-weighted (-15 dBu In @ +35 dB gain)

Distortion (THD)

0.002%, A-weighted

Pad

-25 dB, channels 1-6

Phantom Power

Switchable +48 V

Hi-Z / Line Inputs

Type

4x 1/4" / 6.35 mm TRS, balanced (channels 1-4)

Impedance

1.8 MOhms balanced, 1 MOhm unbalanced

Max Input

+ 22 dBu

Mono Input Channels

Type

2x 1/4" / 6.35 mm TRS connector, channels 5-6

Impedance

20 kOhms balanced, 10 kOhms unbalanced

Maximum Input Level

+ 22 dBu

Stereo Inputs

Type

6x 1/4" / 6.35 mm TRS connector, balanced channels 7-12

Impedance

20 kOhms balanced, 10 kOhms unbalanced

Maximum Input Level

+ 22 dBu

Track

Line In

2-Track / Line In: 2x RCA, unbalanced, channels 13-14

Impedance

20 kOhms unbalanced

Gain Range

- ∞ dB to + 20 dB

Maximum Input Level

+ 22 dBu

Equalizer

Equalizer

Low: 60 Hz (± 15 dB)
Mid: 700 Hz (± 15 dB)
High: 6 kHz (± 15 dB)

Aux Inputs

Type

1/8" / 3.5 mm TRS connector, unbalanced

Impedance

10 kOhms

Gain Range

- ∞ dB to +20 dB

Line Output

Type

2x RCA, unbalanced

Impedance

2.4 kOhms

Maximum Output Level

+ 9 dBu

Equalizer

Graphic EQ

Type: Analog 9-band equalizer

Frequency Range

20 Hz to 20 kHz in 9 1-octave bands (ISO frequencies)

Bandwidth

1 octave

Control Range

± 12 dB

Low Cut Frequency

Type: 18 dB/oct, Butterworth, channels 1-6
Frequency: 100 Hz

Wireless

USB

USB Dongle (Not Included): USB socket accepts signals from a maximum of two Behringer ULM microphones

Signal Indicator

LED: 2x green

Main Mix

Noise

Main Mix at - ∞, Channel Fader at - ∞: - 59 dBu / - 59 dBu A-weighted
Main Mix at 0 dB, Channel Fader at - ∞: - 56 dBu / - 56 dBu A-weighted
Main Mix at 0 dB, Channel Fader at 0 dB: - 56 dBu / - 56 dBu A-weighted

Amplifier

Maximum Output Power

Both Channels Driven
8 Ohms Per Channel: 500 W
4 Ohms Per Channel: 1000 W
Bridged Mode
8 Ohms: 2000 W

Speaker

Type

Speakon connector

Load Impedance

Left/Monitor: Minimum 4 Ohms
Right/Mono: Minimum 4 Ohms
Bridge: Minimum 8 Ohms

General

Display

2-digit, 7-segment LED

Power

Mains voltage
120 VAC, 50/60 Hz
Mains Connection: Standard IEC receptacle

Fuse

T 8 A H 250 V

Power Consumption

Power Consumption at 4 Ohms, 1/8 Rated Power: 180 W

Dimensions (H x W x D)

10.9 x 17.9 x 9.8" / 27.6 x 45.5 x 25.0 cm

Weight

19.8 lb / 9.0 kg

 

 

DYNACORD POWERMATE 600-3 COMPACT POWER MIXER.2X340W-4ohms Original 3 years warranty of Greek distributor This extremely compact powered mixer is the youngest member of the PowerMate3 family. With a total output of 2,000 watts, it is far and away the most powerful compact mixer on the world market, yet it weighs only 9kg! With its very lavish feature set and exemplary versatility it is the ideal choice for all professional applications in which few channels yet very high audio quality are required. Performance without compromises: intuitively operated mixing section; 2 editable digital effects devices with 100 presets each and 20 user memories each; professional 4xIN / 4xOUT digital interface (USB) for the connection of a PC or Mac; stereo equalizer in the master section; large, contrast-rich OLED display; and a class-D high-performance power amplifier delivering 2 x 1,000 watts RMS into 4 ohms. Exclusively high-quality brand components have been used; all faders and potentiometers are supplied by ALPS. In the mixer section, a total of 8 channel strips are available: 4 MIC / LINE channels, 2 MIC / Stereo USB channels ('Super Channels') and 2 stereo LINE channels. The MIC / LINE channels offer extremely low-noise and low-hum electronically balanced XLR microphone inputs with an extremely low distortion factor (typ. < 0.002%) for the connection of low-impedance microphones. For condenser microphones, phantom power (+48 volts) is centrally switchable. The LINE inputs are also electronically balanced and implemented as jack sockets. In addition to a Gain control, a highly efficient 3-band equalizer, an FX send, an AUX send and a MONitor send as well as either Panorama or Balance controls are available. The four MIC / LINE channels boast, in addition, a switchable 80Hz Lo-Cut filter, whilst the Super Channels 5-6 and 7-8 are supplied by the USB inserts 1-2 and 3-4, in each case in stereo. The STEREO-LINE channels (9-10 and 11-12) offer electronically balanced jack inputs for the connection of electronic instruments such as keyboards, drum-computers, guitars and basses with active electronics, as well as all other high-level stereo signal sources such as additional mixers, effects devices etc. CD or MP3 players can be connected to the additional cinch (RCA) inputs CD 1-2 and CD 3-4, which are switched in parallel. The tone controls and sends are identical to those of the MIC / LINE channels. In all input channels, a Signal / Peak LED is provided to assist level control. The SIG LED illuminates at around 30 dB and the PK LED at 6dB beneath the distortion threshold. A MUTE button and a PFL button (in channels 5-12 in stereo) are further features found in all input channels. The DIGITAL AUDIO INTERFACE supplies two stereo channels, present as USB 1-2 and USB 3-4 in Super Channels 5-6 and 7-8 respectively. This interface is implemented professionally in 24-bit resolution and supports sampling rates up to 96 kHz, thereby satisfying studio requirements. The USB sends are supplied with the Master L and R, AUX and MON signals. The DIGITAL AUDIO INTERFACE can be used for input and output simultaneously. Via the USB 2.0 port of your PC / Mac, four channels can be transmitted simultaneously in each direction. When a USB 1.1 interface is used, two channels can be transmitted simultaneously in each direction. The PowerMate is designed for the level of standard PCs / Macs; the gain level can easily be adjusted, if need be, from the computer connected. Included in the delivery is a DVD containing the professional recording software Cubase LE and PC / Mac USB drivers. PC MIDI Interface The PowerMate also makes available a fully-featured PC MIDI interface. The MIDI input also supports the remote switching of both internal effects units using a master keyboard or MIDI footswitch. In the PowerMate's Master Section are to be found the Master A L+R sends (on separate faders), an additional Master B send (switchable pre/post and mono/stereo), the stereo effects returns, and the send signals of the AUXiliary and MONitor busses. If the AUX buss is not used to supply FX 2, it can be switched pre or post and thereby used as an additional monitor send or to supply an external effects device. The 9-band stereo equalizer in the master section allows you to adjust the frequency response to the acoustics of the room. The REC SEND and USB OUT controls determine the level of the master L+R signal at the Rec Send sockets and in the output channels of the digital USB interface. The control below it allows you to adjust the volume in the headphones. Two ten-LED meters provide an overview of the power amplifier level. When the PFL switch is activated, the left-hand LED chain shows the internal level of the master buss in dBu. The STANDBY switch mutes all outputs. For the playback of things like interval music, the DEVICE SETUP menu allows you to route stereo channel 11-12 for standby operation directly to the power amplifiers. The PowerMate is equipped with two very high-quality, 24-bit stereo effects processors, FX 1 and FX 2; these function independently and can therefore be mixed. The two effects units are fully identical in design. Each effects section offers 100 presets including high-quality reverb, delay and modulation effects selected by means of the display. When a delay effect is active, the delay time can be synchronized to the beat of the music using the TAP key. The further possibility exists of modifying individual parameters of the presets and storing the results in the 20 user memories provided. Both effects units are supplied by the FX Send buss. Using the DEVICE SETUP menu, you can, if you wish, configure the AUX send buss to function as an FX 2 send, so that only the FX 1 effects unit is supplied by the FX 1 buss. In this way, the two effects devices can be controlled independently of one another. The effects can be mixed separately in the master and monitor busses. The large, high-contrast OLED display is easily read from a wide range of viewing angles—even in very bright surroundings. The operation of the effects units and processing menus is intuitive and made easier still through the use of soft keys and a rotary encoder. Processing Menus: Particularly valuable in making it possible to adjust the PowerMate perfectly to the selected loudspeaker cabinets, thereby optimizing the audio performance and maximizing the operating safety and reliability of the system, are the LPN Processing and Speaker Protection menus. LPN processing Typical small to medium-sized loudspeaker cabinets, for physical reasons that have nothing to do with their make or quality, exhibit distortion in the transient response of the woofer. Since neither graphic nor parametric equalizers can do anything to alleviate this problem, the PowerMate offers a configurable LPN (low-pass notch) filter. Depending upon the size of the loudspeaker cabinet being used and also to adjust to problematic acoustics (such as those of bassy, boom-ridden rooms), the LPN filter can be set to either High or Medium. The result is considerably greater punch (e.g. from the bass drum), an extension downwards of the frequency response, and improved transparency in the bass and midrange. Speaker Protection This menu allows you to match perfectly the continuous power output of the PowerMateʼs power amplifiers to the connected loudspeakers in the interests of greater operational safety and reliability. Through dynamic limiting of the maximum power at the output, loudspeaker damage due to thermal overload can be avoided, without the wide dynamic range of the power amplifiers being sacrificed. For this purpose, the maximum permissible nominal power handling of the connected loudspeaker cabinet can be selected from the menu. Unlike the case with conventional voltage limiters, dynamic peaks of short duration are permitted, as loudspeaker cabinets can as a rule tolerate peak levels many times higher than their nominal sustainable loads (RMS). The speaker protection supervises permanently the amount of energy being fed to the loudspeakers, only limiting it in the event of a threatened overload, and even then, doing so softly and inaudibly. For peak levels of short duration, the full output of the power amplifier remains available at all times, even when relatively small cabinets are being used. As a result, not only is the maximum dynamic range of the system maintained but also, and at all times, the highest degree of operational safety and reliability. Professional Digital High-Performance Power Amplifier The PowerMate is equipped with a professional, extremely powerful, stereo power amplifier that uses modern and highly efficient class-D technology for audio performance of the highest quality. What this means is that at a nominal output of 2 x 1,000 watts RMS into 4 ohms (or 2 x 1,350 watts RMS into 2.7 ohms) only a comparatively small amount of heat is generated within the device, which therefore consumes considerably less electricity than a conventional power amplifier. The minimal load impedance at the output is 2.7 ohms, making operation with up to three 8-ohm loudspeaker cabinets per channel, connected in parallel, possible with no problems. The overall power supply is handled by an extremely stable, microprocessor-controlled, switching power supply, bringing massive gains in terms of weight-saving over a conventional toroidal transformer. Another advantage is the automatic mains voltage switching, which ensues that the PowerMate can be used without any problem anywhere in the world. Voltage surge protection is also integrated. A ʽsoft startʼ function prevents the mains fuse tripping when the device is switched on. The PowerMate is equipped, naturally, with all the protective circuitry familiar from DYNACORD power amplifiers and satisfies even the extreme demands of hard tour use. The power amplifiers are protected against thermal overload, short-circuit, back EMF and no-load operation as well as high-frequencies or DC at the output. Both outputs, here, are supervised independently so that, should a fault occur, only the channel affected is shut down. When the device is powered up, there is a delay before the power outputs are connected, to obviate the risk of noise. The thermal stability of the PowerMate is assured by two very quiet fans the speed of which is continuously variable. The front-to-rear airflow allows the device to be used in large or small racks. Furthermore, the PowerMate is equipped with an intelligent thermo-limiter, so if ever the threat of overheating does arise, the clip limiter intervenes in a highly musical way, acting only upon the peaks. In this way, a total shutdown of the power amplifiers is effectively prevented, as is any obtrusive fall in the overall volume level. The PROTECT and LIMIT LEDs on the front panel indicate the current operating state of the power amplifiers. To ensure safe transportation, the PowerMate 6003 is supplied with a solid plastic lid that is held in place simply and securely, without the need for any locking mechanism, by magnets. Available as an optional accessory, the carrying bag BAG-600PM not only accommodates the PowerMate with its lid but also offers an additional compartment for cables etc. For rack installation, the RMK-PM600-3 rack-mount kit is available as an option. Order No. F01U213899 (DC-PM600-3-UNIV) Channels (Mono + Stereo) 4 + 4 Auxiliarys (MON, FX, AUX) 1 Pre, 1 Post, 1 Pre/Post switchable Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel into 4 Ohms 2 x 1000 W Power Requirements (SMPS with auto range mains input) 100 V to 240 V AC, 50 Hz to 60 Hz Power Consumption, at 1/8 maximum output power, 4 Ohms 450 W Dimensions with lid (W x H x D), mm 438.8 x 161.7 x 362.5 Net Weight, without lid 9.0 kg complete specifications see download section, Datasheet EDS User's Manual

The Phonic Powerpod Series are powered mixers in a compact and durable design. The Powerpod 415RW has four Mic/Line input channels and a built-in 150 Watt amplifier, as well as onboard USB module for recording and playback and Bluetooth Module for wireless audio streaming. The 2-band EQ on every channel gives you maximum control over your mix, and the Powerpod 415 RW's built-in variable digital delay allows users to better tweak their mix. Powerpod Series Powered Mixers are great all-in-one mixer/amplifiers for bands, traveling musicians, school auditoriums, houses of worship and clubs. 

Features:

  • Built-in 150W output power
  • 4 Mic/Line input channels
  • USB recorder and playback device for capturing all performances with ease
  • Bluetooth audio streaming
  • Variable digital delay with time and repeat control
  • Main insert point via 1/4" TRS jack
  • Super musical 2-band EQ on mono channels
Μic Input: 1-6
Power 4Ω: 100W - 200W
Console Layout: Vertical

500-Watt 10-Channel Powered Mixer with KLARK TEKNIK Multi-FX Processor, Compressors, FBQ Feedback Detection System and Wireless Option

  • Ultra-compact 2 x 250-Watt stereo powered mixer
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • 8 "Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
  • Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Studio-grade compressors with super-easy "one-knob” functionality and control LED for professional vocal and instrumental sound
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal

  • “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
  • 10-channel mixer section features 6 mono and 2 stereo channels plus separate Aux input
  • Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
  • Selectable stereo (main L/R), double mono (main/monitor) amplifier operation
  • Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
  • Standby switch mutes all input channels during breaks while background music is provided via Aux input
  • Adjustable stereo Aux input for connecting external signal sources
  • Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
  • Rack mount brackets included
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
Κατέβασε ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ EUROPOWER PMP6000 1600-Watt 20-Channel Powered Mixer with Dual Multi-FX Processor and FBQ Feedback Detection System
  • Ultra-compact 2 x 800-Watt stereo powered mixer (1600 Watt bridged mode)
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Ultra-compact design at nearly half the weight of conventional powered mixers
  • 20-channel mixer section features 12 mono and 4 stereo channels plus separate CD/Tape input/output
  • 2 studio-grade 24-bit stereo FX processors with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • 12 high-quality XENYX Mic Preamps with switchable +48 V phantom power for condenser microphones
  • Effective, extremely musical 3-band EQ, switchable Low cut filter, and Clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
  • Voice Canceller function removes singerʼs voice from recordings for karaoke applications
  • Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
  • Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
  • Standby switch mutes all mic input channels during breaks while background music is provided via CD/Tape input
  • Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
  • Adjustable stereo 2-Track input for connecting external line sources
  • Multi-functional stereo Preamp outputs for added flexibility
  • Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
  • High-quality components and exceptionally rugged construction ensure long life
  • Conceived and designed by BEHRINGER Germany
The new BEHRINGER PMP Powered Mixers (2 x 800-Watt stereo, 1600-Watt bridged mode) produce even more power than their predecessors while maintaining a famously low weight and high efficiency. These mixers employ Class-D technology including a new switch-mode power supply, significantly reducing weight and heat. The 20-channel PMP6000 features 12 built-in XENYX preamps, the 16-channel PMP4000 features 8 built-in XENYX mic preamps, and the 10-Channel PMP1680S features 8 high-quality built-in mic preamps. All three models feature 24-bit FX processors and FBQ Feedback Detection. What is Class-D Technology? Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces power losses from the output devices given off as heat. Less heat means our amps donʼt need massive heat sinks, and that means we can make them lighter. Our no-compromise design means the new PMP mixers will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles. When used in conjunction with switching-mode power supplies, which donʼt require huge and heavy transformers, our Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up. Massive Mono or Stunning Stereo Our latest PMP give you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, PMP mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time. Small, Simple, Superb Medium-sized events call for a lightweight (PMP6000: 13.1 kg/ 28.9 lbs; PMP4000: 0.4 kg/22.9 lbs; PMP1680S: 9.9 kg/28.8 lbs), easy-to-use powered mixer. BEHRINGER powered mixers are the most efficient, affordable mixers for the job, and are even suitable for use as pure analog mixers or as pure power amplfiers. With new technological advantages and incredible built-in features, itʼs easier than ever to lend exceptional sound quality to all kinds of public performances.  
Weight17.70 kg9.00 kg9.00 kg0.00 kg5.00 kg13.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 17.70 kg
Weight 9.00 kg
Weight 9.00 kg
Weight 0.00 kg
Weight 5.00 kg
Weight 13.30 kg