| Content | Omni-directional microphone for free-field measurement. With a highly reliable circuit and a 1/4" pre-polarized condenser capsule, it boasts high stability, low distortion and low noise in performance. Its excellent flat frequency response makes it ideal for sonic analysis systems and recording.
Features:
- Flat response, excellent electro-acoustical characteristics
- Ideal for room analysis systems, measurement, testing and recording
- Standard 1/2" measurement diameter
- Type: Back-electret condenser mic
- Pickup Pattern: Omni-directional
- Frequency Response: 20~ 20000Hz
- Sensitivity: -37dBV/Pa (14mV/Pa)
- Rated Impedance: 200 ohm
- Max. SPL: 132dB
- Signal-to-noise Ratio: >70 dB
- Power Supply: 9~52V Phantom power
- Current Consumption: 2mA
- Connector: 3-pin XLR gold-plated
- Weight: 150g (5.3 oz)
- Weight Unpacked: 1.17 lb(0.53 kg)
- Weight Packed: 1.17 lb(0.53 kg)
- Width Packed: 4.75“(12.065 cm)
- Depth Packed: 12“(30.48 cm)
- Height Packed: 3“(7.62 cm)
|
Omni-directional test and measurement microphone for RTA and software systems.
The TM1 is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use and affordability.
Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 is designed to capture acoustic measurements for room analysis software programs, real time analyzers and other sound control devices. With a flat frequency range of 20 Hz – 25 kHz, the TM1 is an excellent tool for sound engineers, sound companies and recording enthusiasts.
The TM1 is designed, machined, assembled and tested by Audix in the USA.
Model Variation: TM1 PLUS - includes calibration data file and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter *
*Bruel & Kjaer® 4231 sound level calibrator or equivalent
| Transducer | Pre-polarized Condenser | | Polar Pattern | Omnidirectional | | Frequency Response | 20Hz to 25kHz (+/- 2dB) | | Dynamic Range (Typical) | 112dB | | Signal-to-Noise Ratio | 66dB | | EIN | 28dB A-weighted | | Maximum Input Sound Level | 130dB with distortion | | Power Requirements | 18 - 52V Phantom | | Output Impedance | 200 ohms | | Output Connectors | 3-pin XLR | | Sensitivity | 6.5mV / Pa @ 1k | | Housing | 4 Piece Precision Machined Brass | | Dimensions | Length 5.9" (150mm) |
|
The UNlDYNE? III Model 545SD is a dual-impedance, unidrectional, dynamic microphone. Shipped connected for low-impedance operation, it features a silent magnetic reed on/off switch.
The 545SD is a favorite for instrument pickup and recording, and can be used on lecterns for public address systems such as those used in political conventions and legislatures, convention halls, hotels, public auditoriums, stadiums, schools, and churches.
- Exceptionally uniform cardioid pattern minimizes feedback in PA applications
- Selectable dual-impedance operation
- Silent magnetic reed on/off switch with lock-on option
- Cardioid dynamic
- Frequency response: 50 to 15,000 Hz.
| The Beta 87A has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production. This long-standing favorite now incorporates a cardioid polar pattern and has been named the Beta 87C TM.
Developed in response to professional demands associated with the use of personal monitoring devices like the Shure PSM ? Series, Shure's new Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.
The uniform cardioid polar pattern of the Beta 87C enables users to effectively reject ambient noise arriving at the rear of the microphone, an attribute that will be especially appealing to users of personal monitors and others who frequently experience undesirable sounds bleeding into their mixes.
Other features include:
- Smooth, wide frequency response with slight presence rise
- Uniform cardioid polar pattern for maximum isolation
- Minimal off-axis tone coloration
- Low-frequency roll-off compensates for proximity effect
- Three-stage pop filter minimizes breath pop and noise
- Break-resistant stand adapter
- Frequency response: 50 to 20,000 Hz
|
NEW Wider mounting base capable of accommodating a larger range of microphone stands. Even works with the LP Claw.
Specifically engineered for drum and instrument applications, the Beta 56A's compact, pivoting design makes it the ideal choice for these applications.
Its extremely uniform supercardioid pickup pattern provides high gain before feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical Beta 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.
- Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility
- Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis sound
- Compact design reduces stage clutters
- Hardened steel mesh grille resists wear and abuse
- Neodymium magnet for high signal-to-noise ratio output
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Frequency response: 50 to 16,000 Hz
|
KSM44A Multi-Pattern Dual Diaphragm Microphone
Premium microphone with three polar pattern options (cardioid, omnidirectional, bidirectional).
Features - Prethos® Advanced Preamplifier Technology: Class A, discrete, transformerless preamplifier provides transparency, extremely fast transient response and no crossover distortion. Minimizes harmonic and intermodulation distortions.
- Groundbreaking specifications: 4dB of self-noise and max SPL of 131 dB for a total dynamic range of 127 dB – an increase of 7 dB that defines the new standard for cleanly nuanced audio capture
- Multiple polar patterns–cardioid, omnidirectional and bidirectional–for maximum flexibility in a wide variety of recording applications
- Dual 1 inch, externally biased, ultra-thin, 2.5 μm, 24 Karat gold-layered, low mass diaphragms provide superior frequency response
- Premium electronic components and gold-plated internal and external connectors
- Subsonic filter eliminates rumble from mechanical vibration below 17 Hz.
- Switchable 15 dB pad for handling extremely high sound pressure levels (SPLs)
- 3-position switchable low-frequency filter helps reduce unwanted stand vibration noise or counteract proximity effect
- Integrated three-stage "pop” protection grille reduces plosives and other breath noise
| Type | Condenser (externally biased) | | Frequency Response | 20 to 20,000 Hz | | Polar Pattern | Cardioid, Omnidirectional, Bidirectional | | lmpedance | 50 ohms | | Phantom power required? | 11–52 V DC phantom power (IEC-61938) 5.8 mA, maximum |
|
Reviews
There are no reviews yet.