Peerless 830 844 12″ Round XXLS Subwoofer

232.00 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Specifications Power (RMS): 350 Watt Impedance: 4 Ohm Megaphone Depth: 144.2 mm Hole Diameter: 308.5 mm Sensitivity: 90.3 db Size: 12 Inches

 

Read more

Specifications
Power (RMS):
350 Watt

Impedance:
4 Ohm

Megaphone Depth:
144.2 mm

Hole Diameter:
308.5 mm

Sensitivity:
90.3 db

Size:
12 Inches

Weight 2.50 kg

Reviews

There are no reviews yet.

Be the first to review “Peerless 830 844 12″ Round XXLS Subwoofer”

Your email address will not be published. Required fields are marked *

Quick Comparison

Peerless 830 844 12" Round XXLS Subwoofer removeCELESTION T3054 WOOFER 12'' G12-65 HERITAGE 15OHM FOR GUITAR AMP 65W 97dB removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeB & C Speakers 12-NW100 1000W Subwoofer Neodymium 12 inch, 96dB removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeB & C Speakers 12-TBX100 SPEAKER subwoofer 12 inch 1000W, 95dB remove
NamePeerless 830 844 12" Round XXLS Subwoofer removeCELESTION T3054 WOOFER 12'' G12-65 HERITAGE 15OHM FOR GUITAR AMP 65W 97dB removeB & C Speakers 12-PZ32 Woofer 12 inch 400WRMS 97dB removeB & C Speakers 12-NW100 1000W Subwoofer Neodymium 12 inch, 96dB removeCELESTION T5491 WOOFER 12'' NTR12-3018D PRO AUDIO 350W removeB & C Speakers 12-TBX100 SPEAKER subwoofer 12 inch 1000W, 95dB remove
Image12-nw100 bc speakers subwoofer woofer neodymium
SKU830844T305412-PZ3212-NW100T549112-TBX100
Rating
Price 232.00 incl. GR VAT 173.59 incl. GR VAT 156.00 incl. GR VAT 412.99 incl. GR VAT 237.58 incl. GR VAT 317.00 incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content Specifications Power (RMS): 350 Watt Impedance:
4 Ohm Megaphone Depth:
144.2 mm Hole Diameter:
308.5 mm Sensitivity:
90.3 db Size:
12 Inches

Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.

With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.

 

General specifications
Nominal diameter 12“, 305mm
Power Rating 65W
Nominal impedance 8Ω and 15Ω
Sensitivity 97dB
Chassis type Pressed steel
Voice coil diameter 1.75“, 44.5mm
Voice coil material Rounded copper
Magnet type Ceramic
Magnet weight 35oz, 0.99kg
Frequency range 80-5000Hz
Resonance frequency, Fs 85Hz
DC resistance, Re 6.9Ω & 11.8Ω
Mounting Information
Diameter 12.2“, 309mm
Overall depth 5.0“, 128mm
Magnet structure diameter 5.7“, 145mm
Cut-out diameter 11.1“, 283mm
Mounting slot dimensions 0.31“, 7.9mm Ø
Number of mounting slots 4
Mounting slot PCD 11.7“, 297mm
Unit weight 12.1lb, 5.5kg

 

Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.

Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request

Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH

Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.

The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.   2000 W continuous program power capacity 100 mm (4 in) copper voice coil 45 - 1500 Hz response 96 dB sensitivity FEA optimized Neodymium magnet assembly Double silicone spider with optimized compliance Ventilated voice coil gap for reduced power compression

General

Product type Cone driver
Brand B&C Speakers
Reference 12NW100
Product code ALT12NW1008

Informations

Nominal impedance 8 ohm
Dimensional category 12.5 inch
Frequency coverage type Sub, Low, Midbass
Manufacturer sensitivity 96 dB
Calculated sensitivity 93.76 dB
Nominal power handling 1000 W
Bandwidth 45÷1500 Hz

Fundamental parameters

Sd 531 cm²
Mms 119 gr
Le 1.9 mH
Re 5.1 ohm
BL 28 T.m

Small signal parameters

Fs 42 Hz
Qes 0.21
Qms 3.6
Qts 0.2
Vas 44 L

Datas

Xmax ±9 mm
Calculated Xmax ±10.5 mm
EBP 200 Hz
Zmin 6.2 ohm
Fs / Qts 210 Hz
Vas * Qts² 1.76 L
Efficiency 1.7 %
Calculated efficiency 1.5 %
Weight ~8.2 kg
Recommended load volume 50 L
Fréquence d'accord liée à la charge 50 Hz

Dimensions

Voice coil diameter 4 inch
Winding depth 25 mm
Gap height 12 mm
Outside diameter 319 mm
Baffle cutout diameter 281 mm
Front thickness 13 mm
Depth after front 124 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Basket masterial Aluminium
Winding material Copper
Voice coil former Glass fiber
  • 12” neodymium woofer offers 300Wrms (AES) continuous power handling and 98dB sensitivity
  • 3” high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range
  • Extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio
  • Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Nominal diameter (mm/in) 305/12
Power Rating (AES, W rms) 300
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 76.2/3.0
Magnet type Neodymium
Chassis type Cast aluminium
Sensitivity (dB) 98
Frequency range (Hz) 50-4000
Coil material Round copper
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax (mm/in) 4/0.16
Gap depth (mm/in) 8.0/0.32
Voice coil winding width (mm/in) 16.0/0.63
Small Signal Parameters
D (m/in) 0.26/10.24
Fs (Hz) 56.4
Mmd (g/oz) 54.41/1.92
Mair 6.92/0.244
Qms 2.74
Qes 0.33
Qts 0.29
Re (Ω) 5.77
Vas (lt/ft3) 51.78/1.828
BI (Tm) 19.61
Cms (mm/N) 0.13
Rms (kg/s) 7.921
Le (mH) 0.778
Mounting Information
Overall diameter (mm/in) 310/12.2
Overall depth (mm/in) 137/5.39
Cut-out diameter (mm/in) 286/11.26
Mounting slot dimensions (mm/in) 6.5/0.26 x 9.5/0.37
Number of mounting slots 8
Mounting slot PCD range (mm/in) 294/11.57
Unit weight (kg/lb) 2.6/5.7
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) -
Single pack weight (kg/lb) -
Multipack (60) size W x D x H (mm/in) 1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb) 146/321

2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 – 1000 Hz response
95 dB sensitivity
Aluminium demodulating ring allows a very low distortion figure
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Weight2.50 kg5.50 kg2.50 kg9 kg2.60 kg11.80 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 2.50 kg
Weight 5.50 kg
Weight 2.50 kg
Weight 9 kg
Weight 2.60 kg
Weight 11.80 kg