PHONIC MAX-1000 Power Amplifier 2x200W 8ohm

No longer available!

229.00 incl. GR VAT

Only 1 left in stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: H06PH00021 Category:
Phonic’s MAX 860 Power Amplifier provides 600 Watts of power at 8 ohms (bridge mono) or 300 Watts at 4 ohms (stereo) – ideal for clubs, churches, auditoriums and more. Input to the MAX amps is achieved via XLR or phone jack, and output is achieved through either Speakon?-type connectors or binding posts. MAX 860 […]

 

Read more

Phonic’s MAX 860 Power Amplifier provides 600 Watts of power at 8 ohms (bridge mono) or 300 Watts at 4 ohms (stereo) – ideal for clubs, churches, auditoriums and more. Input to the MAX amps is achieved via XLR or phone jack, and output is achieved through either Speakon?-type connectors or binding posts. MAX 860 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making the MAX series amplifiers ideal for real world application.

* Output power: 300W @ 4 Ohms stereo, 200W @ 8 Ohms stereo
* High-current toroidal transformers for greater power and low noise
* Independent user-defeatable peak limiters reduce distortion
* Selectable High-Pass filter at 30Hz or 50Hz
* XLR and 1/4′ TRS input jacks
* Binding post and Speakon?-type outputs
* Front mounted gain controls for easy access
* Signal and Peak LED indicators to monitor performance
* Short circuit, thermal, subsonic, RF protection, output DC offset
* Power on/off muting

Weight 15.00 kg

Reviews

There are no reviews yet.

Be the first to review “PHONIC MAX-1000 Power Amplifier 2x200W 8ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

PHONIC MAX-1000 Power Amplifier 2x200W 8ohm removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeINTERM L-1400 AMPLIFIER 2X450W removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER remove
NamePHONIC MAX-1000 Power Amplifier 2x200W 8ohm removeLD Systems LDDP600 Power Amplifier 2 x 300W 8 Ohm removeBITTNER AUDIO BASIC 200-2x100W-4Ω POWER AMPLIFIER removeINTERM L-1400 AMPLIFIER 2X450W removeDYNACORD L500 2X250W-4Ω POWER AMPLIFIER removeCROWN DSI-1000 2x500W-4Ω POWER AMPLIFIER remove
Image
SKUH06PH00021LDDP600BASIC200L-1400L500DSI-1000
Rating
Price 229.00 incl. GR VAT 450.00 incl. GR VAT 372.00 incl. GR VAT 1,075.00 incl. GR VAT 1,070.11 incl. GR VAT 824.00 incl. GR VAT
Stock

Only 1 left in stock

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

AvailabilityOnly 1 left in stockIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentPhonic's MAX 860 Power Amplifier provides 600 Watts of power at 8 ohms (bridge mono) or 300 Watts at 4 ohms (stereo) - ideal for clubs, churches, auditoriums and more. Input to the MAX amps is achieved via XLR or phone jack, and output is achieved through either Speakon?-type connectors or binding posts. MAX 860 features ground switches, user defeatable clip limiters, selectable high pass filters, and the option to choose between stereo, parallel and bridge operating modes, making the MAX series amplifiers ideal for real world application. * Output power: 300W @ 4 Ohms stereo, 200W @ 8 Ohms stereo * High-current toroidal transformers for greater power and low noise * Independent user-defeatable peak limiters reduce distortion * Selectable High-Pass filter at 30Hz or 50Hz * XLR and 1/4' TRS input jacks * Binding post and Speakon?-type outputs * Front mounted gain controls for easy access * Signal and Peak LED indicators to monitor performance * Short circuit, thermal, subsonic, RF protection, output DC offset * Power on/off muting

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 200:  2x 100 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  10 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

L1400 450W-450W 4ohm (280W-280W8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series
power amps combine excellent audio performance, modern and innovative
circuit design, meticulous and exceptionally rigid construction, and the highest
levels of operational integrity and reliability with an appropriate and more than
realistic price. The robust steel chassis provides outstanding torsional strength
through L-shaped side panels reaching under the thick aluminium front panel.
Thermal breakers prevent the power supply units from being damaged by thermal
overload. Electronically controlled fans provide sufficient front-to-rear airflow and
a special cool air diverter takes care of thermal stability. The fans? noise-level is
extremely low which provides the possibility for studio use. If necessary, a supplied
air-filter can be mounted behind the front panel ventilation louvres.
 
Features
* Excellent audio performance
* Symmetrical topology
* Ultra-low distortion
* Generously dimensioned power supply units
* Suitable to be operated on loads down to 2 ohms
* Suitable to drive complex loads with phase angles of ± 90 degree
* Extensive protection circuitry
* Unique Back-EMF protection
* Switchable limiters
* Switchable Hi/Lo-Cut filters
* Robust steel chassis
* Exceptional low noise front-to-rear air-flow
* XLR-type inputs and direct-outs
* LED display shows On, In, Out, Limit and Protect
* Highly reliable operation

Specs
* Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms,
   A-weighted, RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 25 V / ?s
* Power Consumption : 300 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 88.1 mm
* Depth : 426 mm
* Weight : 14 kg
 

Engineered from the ground up for unmatched quality and performance,
the Crown? DSi Series of power amplifiers offers three models of 500W,
800W, and 1200W per channel at 4 ohms. Onboard digital signal processing
includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15
connector provides easy input/output connectivity between DSi amplifiers
and the new DSi-8M System Monitor.
The intuitive front panel LCD screen guides installers through a setup process?
featuring presets for the industry-standard JBL cinema loudspeaker systems?
to make configuration quick and easy.
At the touch of a button, Crown?s DSi cinema amplifiers deliver perfectly matched
performance with each award-winning JBL ScreenArray? system, making this the
ultimate cinema solution.

Features :
Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
Automatic presets for popular JBL cinema speaker systems for quick, easy
configuration
Intuitive front-panel LCD screen guides installers through setup
Onboard digital signal processing includes crossovers, EQ filters, delay, and
output limiting
Computer connectivity via USB allows fast setup and configuration with HiQnet?
System Architect? software
Rear-panel HD-15 connector provides easy input/output connectivity between DSi
amplifiers and new DSi-8M System Monitor
Switch-mode universal power supply
All products fill 2U rack spaces and weigh under 19 pounds
Barrier strip outputs, removable Phoenix-style input
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
and guarantees its specifications

The Crown? DSi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply. A rear-panel HD-15 connector shall
provide input/output connectivity between the DSi amplifi er and the DSi-8M
System Monitor.
The outputs shall be usable as stereo or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, fl ashes when a very low-level
signal is present at input.
?10 Indicator: Green LED flashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED flashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp/Fault Indicator: Red LED, one per channel, illuminates under Fault or
excessive temperature conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker.
HiQnet USB Connector: Type B, connects to a HiQnet network.
HD-15 Connector: For cinema I/O compatibility with DSi-8M System Monitor.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Stereo (per channel): 700W with 1% THD, 4 ohm Stereo
(per channel): 500W with 0.5% THD, 8 ohm Stereo (per channel) 275W with
0.5% THD, 4 ohm Bridge-Mono: 1,400W with 1% THD, 8 ohm Bridge-Mono:
1,000W with 0.5% THD.
Voltage Gain at 1kHz, 8 ohm rated output: 26 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity at 8 ohm rated output: 2.35V.
Sensitivity at 4 ohm rated output: 2.24V.
Sensitivity at 2 ohm rated output: 1.88V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 105 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 500 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
EQ: 6 parametric fi lters per channel with adjustable Q, boost/cut ±15 dB. Also
adjustable high and low shelving fi lters.
Filters: Highpass and lowpass per channel. Butterworth 12/18 dB per octave
and Linkwitz-Riley 24 dB per octave. High and low shelving fi lters, one per
channel.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 5 user-defi nable loudspeaker presets and 15 factory-default JBL
system presets.
Protection shall include the following:
DSi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg)

Weight15.00 kg13.00 kg10.00 kg14.40 kg16.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 15.00 kg
Weight 13.00 kg
Weight 10.00 kg
Weight 14.40 kg
Weight 16.00 kg
Weight 10.00 kg