PHONIC A-2800 2-in 8-out Line Mixer – Splitter

Phonic's new A2800 2-in, 8-out distribution mixer gives better control over every aspect of your audio. Offering two main input channels, in addition to a stereo in/out LINK, the A2800 enables your input signals to be separated and mixed to up to 8 line-level outputs with both XLR and 1/4" TRS connections available. This signal distribution magician can help solve numerous setup issues, whether you need to take advantage of the splitting function or simply use it as a line mixer, the A2800 provides clean, noise-free operation in any professional live and commercial installation.

The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.

The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.

The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.

The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels.

• 1x6 Stereo Distribution Amp with Monitoring.
• 1 set of stereo (2) XLR inputs.
• 6 sets of stereo (2) XLR outputs.
• Input stage has LED level meter.
• Each output channel can be switched to mono.
• Each output channel can be individually monitored.
• Built-in headphone amp.
• Optional transformer balanced outputs.
• Electronically balanced inputs with individual left/right level controls.
• LED metering on input for balancing stereo material or two mono signals.
• Left / Right level controls on each output with a stereo / mono switch.
• Headphone jack to monitor output of selected channel.
• LED metering on output of selected channel.
• Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
• 1 unit rack space.
• Inputs and Outputs are balanced XLRs at +4dBu.

Signal distributor. 1 stereo input / 4 stereo outputs or 1 mono input / 8 mono outputs

This audio distributor is very useful to supply several audio devices with only one audio source. Its 2 operating modes allow to work with mono or stereo signals. Output level can be controlled independently.

WD 421 adapts itself to work with different impedances, ensuring that output signal level is at least equal to input signal level. It avoids any undesired attenuation and features a LED vumeter to visualize the input signal level.

Audio signal distributor with 2 inputs and 8 outputs.
Two operating modes:
1 stereo input with 4 stereo outputs.
1 mono input with 8 mono outputs.
Adjusting Output level.
Balanced LINK output for interconnecting several units.
Individual gain control of each channel

Inputs: 2 x XLR3 female balanced.
Outputs: 8 x XLR3 male balanced.
Input sensitivity: 0 dBu.
Max. level input: 22 dBu.
Input impedance: 10 kohm.
Level range: ? to - 12dBu.
Frequency response: 20 Hz to 22 kHz.
Distortion: 110 dBu.
Noise and hum: < - 80 dB @ 20 Hz - 22 kHz.
Crosstalk: < - 80 dB @ 20 Hz - 22 kHz.
Output impedance: 120ohm.
Main supply: 110 - 120 V / 220 - 240 V 50/60 Hz.
Power consumption: 20 W.
Dimensions (WxHxD): 483 x 44 x 220 mm.
Weight: 2.75 kg.

A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa. Rugged diecast aluminium box.

Technical specifications:

2 channel micro splitter "1 into 3“, each channel with:

• Input: female XLR type with parallel male XLR Type
• Output 2 transformer isolated male XLR type outputs
• Transformer ratio 1 : 1 Nominal level: 0 dB, max. level +20 dB
• Nominal impedance input and output: 600 ohms
• Ground lift switch

• 5 Zone mixer / distributor
• Adjusts volume of multiple amplifiers or active monitors separately
• Stereo/mono switch + clip and 5 segment LED on each zone
• Connectors: 4x line in XLR (2x L/R), 10x XLR Out (5x L/R)
• Dimensions: 482 x 152 x 44.5 mm (19"/1U)
• Weight: 2.4 kg

• With improved 192 kHz sample rate for the best sound reproduction.
• Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signals.
• Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.
• Ideal for presentation or distribution to another room.
• The optical (Toslink) digital audio splitter can split a single optical digital input to four outputs without delay or loss of quality.
• Supports the S/PDIF and Toslink standard.