Content |
Phonic's new A2800 2-in, 8-out distribution mixer gives better control over every aspect of your audio. Offering two main input channels, in addition to a stereo in/out LINK, the A2800 enables your input signals to be separated and mixed to up to 8 line-level outputs with both XLR and 1/4" TRS connections available. This signal distribution magician can help solve numerous setup issues, whether you need to take advantage of the splitting function or simply use it as a line mixer, the A2800 provides clean, noise-free operation in any professional live and commercial installation.
Extraordinarily low-noise 2 in, 8 out line distribution mixer
Pan / balance control on each output channel for flexible routing
Flexible use as an output level matching preamp or DI box
Link in and out connectors for easy expansion of 16 or more outputs
5-segment output level meters for all channels
3-segment input level meters on each the left and right inputs
Individual left and right volume controls on input channels
Rugged construction with premium components for long-lasting life
Fits neatly into a single 19" rack unit for discrete installation |
About the DI6s It's a fact of audio life that a lot of equipment that has to be connected to professional audio systems isn't impedance or level compatible. Interfaces Unlimited Tape/cassette/DVD/CD decks, audio for video, drum machines, synthesizers, bass guitars, computers; at some stage all these need linking up to Balanced inputs, whether the application is Live sound, Studio or Broadcast. To solve these problems, we've developed the DI-6s:
Six active D.I. (Direct Injection) boxes, plus a 6 into 1 Line Mixer, plus a 1 to 6 Splitter, All of this in a compact, all steel 1 RU package.
A Pro Audio Toolbox This unique and flexible audio toolbox allows Six independent unbalanced audio sources to easily and quietly interface with Balanced pro audio systems, either to individual channels or summed down to one Master output. But that's not all. By pressing a single switch on the rear panel the DI6s will change from being Direct Boxes and a Mixer to being a 6 way Splitter (line distribution amplifier). Now it will split an incoming signal to 6 individual outputs or zones. On the front panel, each channel has 2 IN/OUT jacks, a level control from infinity (off) through 0dB to +15dB gain, and a Clip indicator LED.The Master section has a Master volume control and status LEDs indicating whether the unit is in DI or Splitter mode. In addition, as on all ARX single rack unit equipment, each channel has a numbered marker panel ('scribble strip') you can write on for easy confirmation of channel assigns. Balanced Outputs On the rear, each channel has an XLR Balanced output, with associated Ground lift switch and status LED, to isolate the chassis and electronic grounds. The Master section has both Balanced XLR and Unbalanced Jack outputs. In addition there is a Balanced XLR input with a switch to put the unit in either DI or Splitter mode. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. With so many handy functions, plus a true 'user friendly' layout, it's no wonder people call the DI-6s 'A total Audio Patching System in 1 RU!' You'll never compromise on Quality when you choose ARX
Features Unique Pro Audio problem solver Six Direct boxes, Splitter and Line Mixer in one unit Multi mode unit: Six in, Six out; Six in, One out; One in, Six out Individual Output Ground lift switches Up to +15dB Gain available per channel Balanced XLR Outputs; High Impedance Jack Ins and Outs Flawless performance in any audio environment
T E C H N I C A L S P E C I F I C A T I O N S
Channels 1 - 6 High Z Input Impedance 2.2 Meg Ohm Max Channel Gain 15dB Clip LED Illuminates 1dB prior to clip Direct Output Impedance 300 ohms Balanced Max Input Level +20dB Max Output Level +21dB Signal to Noise -96dB(unity gain) Frequency Response 20Hz to 20KHz, ±0.5dB Distortion < 0.004%, 1KHz, +4dB Output Connector 3 pin XLR Master Section Output Impedance 300 Ohms Balanced Max Output Level +21dB Signal to Noise -90dB (unity gain) Frequency Response 10Hz to 20KHz, ±0.5dB Distortion < 0.004%, 1KHz, +4dB Output Connector 3 pin XLR Splitter Section Maximum Level + 20dB Input Impedance 20 KOhms, Balanced Input Connector XLR Frequency Response 10Hz?20KHz ±0.5dB AC Power 100-120, 220-240 V AC, 8 VA Size 19?W x 6?D x 1??H, 482 x 155 x 44mm Weight 2.2 Kg (5 lbs)
Front Panel Controls Hi Impedance (Hi Z) insulated jack Input and Output connectors Level control with up to +15dB of Gain available Clip LED indicator Marker panels for labelling DI assigns Master Level controls Rear Panel Balanced XLR Outputs Individual Audio Ground Lift switches and status LEDs XLR and jack Master Outputs XLR Input for splitter Splitter/DI + Mixer mode switch AC input connector, with voltage switch and fuse. |
A 4-channel modular passive Line level splitter system. Each module of the PRM-LS has 4 channels, comprising of one XLR input, one parallel XLR output and 2-balanced XLR transformer isolated outputs. |
- With improved 192 kHz sample rate for the best sound reproduction.
- Supports uncompressed 2-channel LPCM (Linear Pulse Code Modulation) audio signals.
- Supports compressed 2-channel and multi-channel Dolby Digital and DTS audio signals.
- Ideal for presentation or distribution to another room.
- The optical (Toslink) digital audio splitter can split a single optical digital input to four outputs without delay or loss of quality.
- Supports the S/PDIF and Toslink standard.
Your TV has 1 Toslink output, but you use 4 amplifiers. This requires the Toslink cable to be split from 1 into 4. An additional amplifier could be, for example, a surround set, a sound bar of an amplifier in the kitchen
Connections
|
|
Audio input |
1 x Toslink (optical) |
Audio output |
4 x Toslink (optical) |
Audio
|
|
Supported audio |
PCM2, Dolby Digital 5.1 and DTS |
Sample rate |
32 kHz to 192 kHz |
General
|
|
Dimensions (h x w x d) |
24 x 46 x 46 mm |
Weight |
22 grams |
Ambient temperature |
+0 to +40 °C |
Humidity |
10% to 85% |
Power |
100-240 VAC 50/60 Hz, 5 VDC adapter |
|
A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa. Rugged diecast aluminium box.
Technical specifications:
2 channel micro splitter "1 into 3“, each channel with:
- Input: female XLR type with parallel male XLR Type
- Output 2 transformer isolated male XLR type outputs
- Transformer ratio 1 : 1 Nominal level: 0 dB, max. level +20 dB
- Nominal impedance input and output: 600 ohms
- Ground lift switch
| The distribution of mono and stereo balanced audio signals from a single source to multiple destinations has many applications including multi-zone sound reinforcement installations, live sports events coverage, broadcast studios, video suites, duplication or indeed anywhere high quality audio has to be distributed to a number of locations down long cable runs.
The Drawmer DA-6 is a six channel stereo (or twelve channel mono) distribution amplifier featuring XLR balanced inputs and outputs with optional transformer balancing where remote amplifiers and recorders are fed from separate power supplies.
The stereo Input features individual left/right level controls with LED bargraph metering enabling the correct balancing of stereo material or two mono signals. Each of the six outputs incorporate further left/right level controls and a Mono/Stereo switch providing the selection of either one stereo output or two mono outputs per channel. This feature allows the DA-6 to function as either a 1 x stereo input/6 x stereo outputs or 1 x mono input/12 x mono output unit or any combination of the two.
The output section consists of a Channel Select so that the individual left/right output level of each channel is displayed on the output LED bargraph and can be monitored by the Headphone jack socket. A pair of auxiliary link stereo jack sockets (TRS) are provided via the rear panel for connection to further DA-6 units for the distribution of even more channels. Features: - 1x6 Stereo Distribution Amp with Monitoring.
- 1 set of stereo (2) XLR inputs.
- 6 sets of stereo (2) XLR outputs.
- Input stage has LED level meter.
- Each output channel can be switched to mono.
- Each output channel can be individually monitored.
- Built-in headphone amp.
- Optional transformer balanced outputs.
- Electronically balanced inputs with individual left/right level controls.
- LED metering on input for balancing stereo material or two mono signals.
- Left / Right level controls on each output with a stereo / mono switch.
- Headphone jack to monitor output of selected channel.
- LED metering on output of selected channel.
- Auxiliary pair of balanced 1/4" output jacks for linking multiple DA6 units.
- 1 unit rack space.
- Inputs and Outputs are balanced XLRs at +4dBu.
|
Reviews
There are no reviews yet.