Content |
3-Channel DJ Mixer Three phono, three Line and three Mic inputs Talkover switch Push button cueing with cue/program pan control 3-band equalizer (-30dB to +15dB) and gain control on each program channel Master and DJ booth output level control Master output with balance control LED output display for master and cue level 12V BNC gooseneck lamp jack Built-in power supply - no wall wart! Ultra durable crossfader (replaceable) User's Manual
|
- 3 MIC (JACK ¼”) / stereo LINE (RCA) input channel mixer
- Input signal pushbutton selector (MIC/LINE) on back panel
- Independent internal assignable phantom power for all MIC inputs
- Direct MIX input allows straight forward connection of further mixers
- Triple tone control (accessible only with screwdriver)
- 2 stereo OUTPUTS (XLR3 / RCA)
- 3 LED OUTPUT level meter
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode pushbutton
- Headphones general MIX monitoring
- Remote MUTE control (EUROBLOCK) allows connection with fire detection systems
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
|
- Three-channel tabletop mixer
- Inputs: two phono/line switchable (RCA), four line (RCA), mic (1/4“)
- Outputs: Master (RCA), Record (RCA), headphone (1/4" stereo)
- Steep three-band EQ/rotary kills on each channel
- Microphone input with EQ
- Six-segment LED display for monitoring signal strength
- Toggle for master and PFL metering
- Replaceable crossfader with reverse and slope controls
Inputs:
- Line: 10K ohm input impedance; 80mV RMS sensitivity for 0dB output
- Mic: 600 ohm input impedance unbalanced; 1.5mV RMS sensitivity for 0dB output; 400mV RMS max input
- Phono: 47k ohm input impedance; 1.3mV RMS sensitivity @ 1kHz for 0dB output
Outputs:
- Line: 7V RMS max
- Headphone: 0.5W into 47ohm
Signal to Noise Ratio (maximum output JIS-A weighted):
- Line: Better than 100dB
- Mic: Better than 95dB
- Phono: Better than 85dB
Distortion: Less than 0.05%
Frequency response:
- Line: 20 – 20,000 Hz ±0.5dB
- Mic: 20 – 15,000 Hz ±0.5dB
- Phono: ±1dB; -3dB attenuation at 20 Hz to reduce rumble and feedback
Channel Equalizer:
- Bass: +12 / -35dB at 20 Hz
- Mid: +12 / -25dB at 1.3 kHz
- Treble: +12 / -20dB at 15 kHz
Channel fader kill: Better than 90dB at 1 kHz
Crossfader kill: Better than 75dB
Crosstalk: Better than 80dB at 1 kHz |
The RMX-33i from Reloop is a 3+1 channel DJ mixer with built-in digital effects and connectivity for smartphones and tablets for professional DJs, serious home enthusiasts, and clubs. The mixer boasts a total of 10 inputs, with channels 1 & 2 featuring line and phono RCA inputs, as well as 1/8" / 3.5mm jacks for connecting any smartphone or tablet. The included audio splitter cable divides the output of the device into two separate mono channels for split cuing, or one stereo channel for production or sampler apps. Channel 3 offers CD and line inputs via RCA.
The main outputs include two balanced XLR (Stereo L+R) and unbalanced stereo RCA connections, while booth outputs are offered via unbalanced stereo RCA. The two headphone outputs include 1/4" / 6.35 mm and 1/8" / 3.5 mm jacks. A combo XLR/1/4" / 6.35 mm input is offered for a microphone, which feeds a dedicated mic channel with a 2-band EQ. Additionally, the mic input can be switched to accept an 1/8" / 3.5 mm stereo input for an additional line input.
Each channel features a 3-band EQ that is switchable between isolator and classic EQ to suit any individual mixing styles. The instant sound FX section is available on any channel, with dedicated potentiometers for control and manipulation. The effects offered include white noise, filter, bit crush, and gate. The 1.8" / 45.0 mm crossfader is replaceable and compatible with innoFADER. The crossfader also features fader-start, reverse, and curve control. The Remix 33i ships with the audio split cable and an international power supply.
- 3 (+1) Channel Digital Effect Mixer
- Fully digital architecture for outstanding sound and flexibility
- 4 Instant Sound Color Effects per channel (Filter, White Noise, Bit Crush & Gate)
- iPad / tablet / smartphone audio split-input
- EQ-setting for classic or isolator (kill)
- 1.8" / 45.0 mm club line & crossfader
- Fader-start, reverse & curve control
- innoFADER compatible
- Mic channel with 2-band EQ
- 2 headphones outputs (1/4" / 6.3 mm jack and 1/8" / 3.5 mm jack)
- Balanced (XLR) and unbalanced (RCA) outputs
- Altogether 10 inputs (2x phono, 7x line, 1x combo-mic)
- Altogether 5 outputs (1x XLR, 2x RCA, 2x headphones)
- Club-quality sound & built
- Optional Reloop RMX innoFADER accessory by Audio Innovate available
- Includes smartphone / tablet audio split cable and international power supply
Type |
3-channel effect mixer |
Connections |
Input
Phono: 2 x stereo RCA
Mic: 1 x combo XLR/1/4" / 6.35 mm
Line: 3 x stereo RCA
Line: 2 x 1/8" / 3.5 mm mono inputs
Line: 1 x stereo 1/8" / 3.5 mmOutput
Main Out: 2 x balanced XLR (stereo L+R)
Main Out: 1 x stereo RCA
Booth Out: 1 x stereo RCA
Headphone: 1 x 1/4" / 6.35 mm
Headphone: 1 x 1/8" / 3.5 mm |
Input |
Line/CD/iPad/Aux: 51 kOhm / -14 dBV (200 mV) ±1 dB
Phono: 47 kOhm / -50 dBV (3.16 mV) ±1 dB
Mic: 12 kOhm / -54 dBV (1.99 mV) ±1 dB |
Output |
Master: 1 kOhm / 0 dBV (1 V) ±2 dB
Balanced: 600 Ohm / 0 dBV (1 V) ±2 dB
Booth: 1 kOhm / 0 dBV (1 V) ±2 dB
Phones: 33 Ohm / 0 dBV (1 V) ±2 dB |
Frequency Range |
iPad/CD/Aux: 20 Hz to 20 kHz +2/-3 dB
Phono: 20 Hz to 20 kHz +2/-3 dB (RIAA) at input level = -60 dBV
Mic: 20 Hz to 20 kHz +2/-3dB
Frequency Increase/Decrease: +12 dB / < -26 dB |
S/N Ratio |
iPad/CD: > 80 dB at 0 dB Input
Phono: > 70 dB at -36 dB Input
Aux: > 70 dB at 0 dB Input
Mic: 70 dB at -40 dB Input |
Dimensions |
10.0 x 4.1 x 14.0" / 25.4 x 10.4 x 35.5 cm |
Weight |
8.4 lb / 3.8 kg |
| OMNITRONIC PM-322P 3-Channel DJ Mixer with Bluetooth & USB Player
3-channel DJ mixer with Bluetooth and MP3 player 3 input channels with gain control, 3-band equalizer, cue button and channel fader DJ microphone channel with level control and 2-band equalizer Integrated Bluetooth audio streaming for your smartphones and tablets MP3 player with USB port and blue LCD screen Pre-fader listening to all input channels and the master output via adjustable stereo headphones output Crossfader with adjustable curve and reverse function Master channel with level control and 6-digit stereo LED level meter, switchable between master and PFL signal 6-digit stereo LED level meter 6 line and 2 phono inputs via RCA jacks Balanced XLR and RCA outputs Record output, independent of the master Controlling by Bluetooth Use a operating range up to 10m Desktop console housing
3-channel DJ mixer with Bluetooth and MP3 player
- 3 input channels with gain control, 3-band equalizer, cue button and channel fader
- DJ microphone channel with level control and 2-band equalizer
- Pre-fader listening to all input channels and the master output via adjustable stereo headphones output
- Crossfader with adjustable curve and reverse function
- Master channel with level control and 6-digit stereo LED level meter, switchable between master and PFL signal
- 6-digit stereo LED level meter
- 6 line and 2 phono inputs via RCA jacks
- Balanced XLR and RCA outputs
- Record output, independent of the master
- Control via Bluetooth
- LCD display
- Operating range up to 10m with line-of-sight
- Desktop console housing
Package contents
- 1 x mixer, 1 x user manual, 1 x power cord, 1 x rCA cable, 1 x declaration of conformity
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
25 W |
Protection class: |
Protection class II |
Power connection: |
Mains input via C8 (M) "figure 8" mounting version power supply cord with Euro plug (provided) |
Control: |
Bluetooth |
Bluetooth: |
Version: 4,2 + EDR
Profiles: A2DP, AVRCP |
Bluetooth device name: |
PM-322P |
Audio player: |
USB + Bluetooth, |
Display type: |
LCD display |
Control elements: |
Audio player, Crossfader, Cue-mix-function, source selector, Crossfade curve switch; Crossfade reverse switch |
Status LED: |
Switchable master level meter, clip, CUE, power |
Connections: |
Input: line via 4 x stereo RCA
Input: line/phono via 2 x stereo RCA
Input: Audio player via 1 x USB A (F) mounting version
Input: Microphone via 1 x 6.3 mm jack socket (mono) mounting version
Output: master via 2 x 3-pin XLR
Output: master via 2 x stereo RCA
Output: headphones via 1 x 6.3 mm jack socket (stereo) mounting version |
Channels: |
Input chanel: 1 x stereo with Line-line-player switch via RCA or player, channel control via fader, 3-band tone control EQ, gain control, CUE switch,
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, gain control, CUE switch,
Microphon chanal: 1 x mono via Jack, channel control via Rotary dial, 2-band tone control EQ, Cue-mix-function,
Master output: 1 x stereo via XLR or RCA, channel control via Rotary dial
Headphones output: 1 x stereo via Jack, channel control via Rotary dial |
Music format: |
MP3, WAV; WMA |
Carrier frequency: |
2,4 GHz |
USB port: |
Typ A |
Range: |
Range up to 10m with line-of-sight |
Housing design: |
Desktop console housing |
Dimensions: |
Length: 28,3 cm
Width: 23 cm
Height: 10,7 cm |
Weight: |
2,58 kg |
Audio player |
Available storage media: |
USB devices max. 32GB (FAT 32) |
| • Bluetooth playback
• Talk over function
• VU channel indication
• MP3 / Phone input selector
Core Beat is the little brother of the Core MIX-3 USB. It has 6 Line inputs, a microphone input and a Bluetooth playback module. The Bluetooth playback module makes it possible to mix your connected players with wireless devices such as a smartphones or tablets. It also has an input that can be switched between line and MP3 level. The MP3 level adjusts the input sensitivity into the correct level for MP3 players, smartphones or tablets. Now you can playback your MP3 devices directly without signal loss. It's built with high quality components to get the best performance and has a separate fader board for easy maintenance The Core Beat has all functionality you need to get your DJ career started. It is equipped with VU indication on each channel, selectable cross-fader curves, a talk over, outputs for both master and booth and with -26dB tone control you will cut any beat you like. Let the Beat rock!
Specifications Inputs channels: 1 x Microphone, combo XLR/Jack
6 x Line, RCA
1 x Bluetooth
Output channels: 1 x Record, RCA
1 x Booth, RCA
1 x Master unbalanced, RCA
1 x Headphones, TRS 6.3mm Jack
Channel EQ range: -26dB / +12dB
Microphone EQ range: -12dB / +12dB
Frequency response: 20Hz -20Khz
Mic S/N Ratio: > 80dB
Line S/N Ratio: > 85dB
Dimensions: 247 x 331 x 84 (WxDxH)
Power input: AC15V/750mA (Adapter included)
Power consumption: 8W
Weight: 4,1 Kg |
Reviews
There are no reviews yet.