PHONIC PAA-3 AUDIO ANALYZER w-USB

Discontinued

393.17 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Handheld Audio Analyzer with USB Interface Built-in calibrated measurement microphone 1/3 octave real-time analyzer 31-band EQ setting value display (boost/cut) RT60 measurement Phase checker Noise generator with pink noise, 1kHz and polarity test signal, balanced output Memory and average calculation function SPL meter calibration through sound level calibrator Sound Pressure Level Meter from 30 dB~130 […]

 

Read more

Handheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included
Weight 0.55 kg

Reviews

There are no reviews yet.

Be the first to review “PHONIC PAA-3 AUDIO ANALYZER w-USB”

Your email address will not be published. Required fields are marked *

Quick Comparison

PHONIC PAA-3 AUDIO ANALYZER w-USB removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removeTOA ZM-104 Impedance Meter removeDBX ADVANCED CABLE TESTER CT-3 removeDAP AUDIO D1907 Cable Tester removeDIGITAL SOUND 8928 Sound dB meter remove
NamePHONIC PAA-3 AUDIO ANALYZER w-USB removePALMER AUDIO PAN05 TOOLS Microphone Merger 2in to 1out removeTOA ZM-104 Impedance Meter removeDBX ADVANCED CABLE TESTER CT-3 removeDAP AUDIO D1907 Cable Tester removeDIGITAL SOUND 8928 Sound dB meter remove
Image
SKUH02PH00033PAN05ZM-104DBX CT-3D19078928
Rating
Price 393.17 incl. GR VAT 52.07 incl. GR VAT 363.00 incl. GR VAT 211.15 incl. GR VAT 80.59 incl. GR VAT93.00 incl. GR VAT
Stock

Out of stock

In stock

Available on backorder

Available on backorder

In stock

In stock

AvailabilityOut of stockIn stockAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentHandheld Audio Analyzer with USB Interface
  • Built-in calibrated measurement microphone
  • 1/3 octave real-time analyzer
  • 31-band EQ setting value display (boost/cut)
  • RT60 measurement
  • Phase checker
  • Noise generator with pink noise, 1kHz and polarity test signal, balanced output
  • Memory and average calculation function
  • SPL meter calibration through sound level calibrator
  • Sound Pressure Level Meter from 30 dB~130 dB
  • Line signal measurement display in dBu, dBV, or Volts (AC)
  • SPL meter and level meter have three level range selections
  • Maximum level, Peak hold displays
  • XLR input and output sockets
  • USB interface for desktop software control
  • Audio test signal CD and supporting software
  • Three power modes: (1) Power Save (2) On (3) Off
  • Operates seven hours with four AA batteries
  • AC power adapter included
With the PAN05, two microphone signals can be mixed down to one. Since decoupling occurs via the balanced resistor network, the PAN05 also lets phantom power "pass through“, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics. SPECIFICATIONS:
  • Input: 2 x XLR/f balanced
  • Nominal impedance: 200 Ω
  • Output 1 x XLR/m balanced
  • Load impedance >200 Ω
  • Symmetrically decoupled through resistors
  • Total ohmic value: 200 ohms
  • Typical attenuation: 6 dB
  • Housing: metal casing 110 x 73 x 42 mm
  • Measures impedance of speaker lines up to 100k ohms
  • Batteries: four (AA)
  • Zero adjustment for accuracy on all ranges
  • Easy to read meter calibrates directly in ohms
  • Includes carrying case, test leads and impedance to power reference chart
  • Five year warranty

 

The dbx CT3 is an advanced cable testing unit allowing you to evaluate a large variety of cables with ease. The CT3 offers many common connectors such as RJ45, RJ11, MIDI, Speaker Twist, XLR, RCA Phono, BNC, DIN, TRS, TS, DMX, & Banana. It can be split into 2 parts, a SENDER and RECEIVER so preinstalled and long cables can be tested.

Features
  • Tests up to 8-pin cables
  • 2 piece chassis for testing installed cables
  • Test Tone Generator
  • Allows connection between different format connectors with ease
  • ʽBananaʼ connector continuity tester with beeper and LED indicator
  • Super-rugged construction for durability and longer life
  • (2) DMX (5-pin) connectors for testing of 5 pin->to pin connections
  • (2) BNC connectors for testing of 2 pin->to pin connections
  • (2) RCA Phono connectors for testing of 2 pin->to pin connections
  • (2) XLR connectors (1 x Male, 1 x Female) for testing of 3 pin->to pin connections
  • (2) MIDI (5-pin DIN) connectors for testing of 5 pin->to pin connections
  • (2) Speaker Twist connectors for testing of 4 pin->to pin connections
  • (2) Banana connectors for testing of 1 pin->to pin connections
  • (2) 1/4” (6.3mm) TRS/TS connectors for testing of 3 pin->to pin connections
  • (2) RJ45 connectors for testing of 8P8C modular connections
  • (2) 1/8” (3.5mm) TRS/TS connectors for testing of 3 pin->to pin connections
  Specifications
Power Requirements (2) 9V batteries, one per side (Batteries not included)
Dimensions 3.5” (8.9cm) (W) x 5.5” (14cm) (L) x 1.5” (3.7cm) (H)
 

 

 

 

This is an on-the-road tool you certainly can't miss in your gearbox! A nifty, handy cabletester, which allows you to check up to six (welding) connections and gives you a visual readout by 2 rows of 6 LED's. The checking itself is done manually per connected pin. A LED will light up to indicate what pin is connected correctly on which side. A short-circuit check with a red LED and audio-warningsignal is also included. On the left and right side you'll find inputs for 6,3 symm. jack, BNC, RCA, 5p. DIN, 5p. XLR, 3p. XLR and Neutrik® Speakon®.

Digital Sound 8928 SPL Meter with Built-In Measurement Mic - calibrated from 300Hz to 8kHz (+/-2dB), 4 control zones in 10dB steps (40-130dB), large LCD display, peak-hold, fast/slow display modes, includes 9V battery. A superbly designed easy to use sound level meter with features normally only found on more expensive instruments. It has an electret condenser microphone giving virtually instant readings updated every 0.5 seconds on an extra large LCD display.
  • 4 measuring ranges, 40 to 70dB, 60 to 90dB, 80 to 110dB or 100 to 130dB
  • 0.1dB resolution updated every 0.5 seconds
  • Auto ranging or manual range selection
  • ʽAʼ & ʽCʼ frequency weighting
  • Fast or slow response filters
  • 42mm LCD display with quasi-analogue bargraph and function Indicators
  • Bargraph in 1dB steps updated every 40ms
  • Max hold function to display the highest recorded value
  • Min/max memory since power on or last reset
  • Low battery indicator
  • Auto power off
  • Analogue output AC: 0.707 Vrms (at full scale)
  • Supplied with battery
Weight0.55 kg0.26 kg2.00 kg1.00 kg1.00 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.55 kg
Weight 0.26 kg
Weight 2.00 kg
Weight 1.00 kg
Weight 1.00 kg
Weight 0.50 kg